|
|
Hybrid microphone preamplifier with variable selection of amplifier technology
Musil, Tomáš ; Levek, Vladimír (referee) ; Háze, Jiří (advisor)
This diploma thesis deals with a basic description of dynamic and condenser microphone, its performance regarding polar patterns and a type of mechanical construction. It also describes a principle of operation of a triode. The thesis deals with selecting of a suitable type of microprocessor to control microphone preamplifier functions. Last part contains a power supply and microphone preamplifier circuits design using a semiconductor and vacuum tube technology.
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
|
|
Design and properties of low-frequency amplifier with vacuum valves
Piroha, Ladislav ; Musil, Vladislav (referee) ; Šandera, Josef (advisor)
The purpose of the bachelor’s thesis is explanation of theory and construction of low frequency tube audio amplifier with UV meter. Main focus is on history and development of vacuum circuits from its early beginning, on electrical parameters and applied physical principles. Explanation of operating characteristics of amplifier classes and comparison of vacuum tube sound acoustic performance against transistor amplifier one. Finally, there is build description of single ended amplifier class A.
|
|
|
Valve amplifier for guitar
Hrabaň, Václav ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
Bachelor thesis deals with design, simulation and construction of guitar amplifier circuit with valves as active devices. Thesis describes in detail one of possible conceptions of a two channel amplifier with switching of clean and overdrive channel. Design contains input amplifier, two switchable preamplifiers, inverter, power amplifier, switching circuit and supply unit. Preamplifiers contain each their own frequency filter and regulation of gain and volume. Power amplifier works in class AB and its power is 40 W.
|
|
|
Vacuum tube headphone amplifier
Musil, Tomáš ; Kledrowetz, Vilém (referee) ; Háze, Jiří (advisor)
This Bachelor’s thesis deals with design and realization of vacuum tube headphone amplifier working in class A. There is a closer look into operating principals of vacuum tube, most common types, basic ways to use it in electronic circuit, designing stabilized power supplies and also realization of functional prototype and measuring it’s parameters.
|
|
|
Tube Microphone
Škoda, Adam ; Šotner, Roman (referee) ; Staněk, Miroslav (advisor)
The presented thesis deals with a tube microphone using a condenser microphone capsule for sound capturing. Moreover, two essential aspects of a tube microphone – the basis of its operation and its design – are also discussed in this thesis. In the designed microphone, there is a vacuum tube known as ECC81. This vacuum tube is used as an amplifying element of an input sound signal. This paper also includes the choice of the most suitable microphone circuit, its modification and the design of a voltage source used for feeding and heating the vacuum tube. Some appropriate simulations were applied to find out the functionality of all designed parts of the microphone system. Following step was the practical realization of all microphone parts as well as the activation and the complete parameters and characteristics measurements of realized microphone system. After the provided measurements, the microphone was compared to equivalent commercial products. Evidently, the realized microphone is qualitatively similar to other commercial products. Presented thesis also contains the list of components and PCBs.
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
|
|
Class A audio power amplifier with tubes
Krutílek, David ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
The topic of my bachelor´s theis is of the class A audio power amplifier using vacuum tubes which is completed with phono preamplifier and input selector. There are used ECC 83 and ECC 88 vacuum tubes for the pre-amplifier design, then EM 84 tubes for the „eye-magic“ equalizer and 300B tubes for the power amplifier design. The maximum output power is 2 x 20W to 8 ? load. In this paper there are presented schematics of the pre-amplifier and power amplifier too. The aim of this bachelor´s project was make complete design of laboratory prototype (scheme, layout of printed circuit, part list and placemnet), realisation function of prototype and laboratory measurements.
|
|
|
Tube microphone preamplifier
Čacký, Adam ; Hruboš, Zdeněk (referee) ; Brančík, Lubomír (advisor)
The theme of the master´s thesis is design a microphone preamplifier which uses vacuum tube as a main amplifying element. Part of the work is theoretical assumptions for the optimal design and implementation of peripheral involvement, comparing the properties of components used and the resulting parameters of modeled device. The thesis also includes a proposal of the source unit for supplying all parts of the preamplifier. The results are accompanied by circuit simulations and laboratory measurements of the main parameters of the designed device.
|
|
|
The construction of a vacuum tube amplifier
STREJC, Jakub
The presented thesis describes the construction of a tube amplifier in both theoretical and practical ways. The aim of this work was to construct a functional tube amplifier with an output of at least 2 x 20 W. The first part of the study describes the theoretical background of tube amplifiers which are recognized for their characteristic sound. Wiring diagrams for each block and other functional blocks of the amplifier, such as headphones or VU meter connections, are discussed. The last part of the thesis focuses on the actual realization of the tube amplifier.
|
guest ::
