| |
|
Grinding Angle Box Unit for Vertical Boring and Turning Machine
Zouhar, Michal ; Kukleta, Pavel (referee) ; Foller, Bronislav (advisor)
My diploma thesis solves project of grinding angle box unit for vertical boring and turning machine which extends technological possibilities of vertical lathe SKD 40/47D. The submitter ČKD Blansko Holding, a.s. demanded to work out assembly drawing, 3 construction drawings and necessary calculations. Spindle drive of grinding unit is implemeted by the aid of engine which is deposit in the sliding machine. Chucking equipment is realised with standart system which is used by ČKD Blansko.
|
|
Protective Guards of Machine Tool
Zlámal, Josef ; Učeň, Oldřich (referee) ; Novotný, Lubomír (advisor)
The master thesis deals with the problematics of machine guard. The first part of the thesis is focused on the analysis of machine guards, legislative safety requirements and noise issues. The second part of the thesis describes design and construction of the machine guard in case of the vertical turning centre, TOSHULIN - POWERTURN 2000, including the calculation of noise reduction.
|
|
PREDICTION OPERATIONAL ACCURACY OF THE CNC MACHINING CENTRE
Michalíček, Michal ; Blecha, Petr (referee) ; Skýpala, Milan (referee) ; Marek, Jiří (advisor)
The main research topic of this dissertation thesis deals with the influence of the working accuracy related to large CNC machines on the required workpiece properties. The state-of-the art has constantly been developed and the customer’s requirements directed to manufacturers of the machine tools are increasingly demanding. There is required a high accuracy, reliability, shortening delivery times etc. The manufacturer is expected to fulfill all the customer’s requirements. The machining accuracy is dependent, among others, on the positioning accuracy of a machine tool that represents the position of the cutting tool relative to a workpiece. The accuracy of a particular machine tool is therefore a limiting factor concerned with reaching the highest accuracy and quality of a workpiece. Acceptance test procedures are initially realized within a manufacturing shop floor and then within a customer environment. The main subject of the testing procedures is to verify. basic properties of a machine tool such as basic dimensions of a machine, strokes in all respective coordinates, machine travels and spindle speeds. A machining of a workpiece with a desired precision specified by the customer is also performed. In this thesis, a new methodology to calculate and determine errors concerned with machining on vertical lathes is proposed with the aim of predicting the machining accuracy of CNC machine tools. The objective of this work was to determine the influence of machining accuracy of a CNC machine in connection with a subsequent geometrical accuracy of a workpiece. Considered position of a tool relative to a workpiece will be affected by errors concerned with a kinematical inaccuracy, geometrical errors and errors related to machining forces. A vertical lathe SKIQ 30 produced by TOSHULIN, a.s. has been used as a testing machine on which the proposed methodology has been verified. During processing various calculations in this thesis there has been found out that the machining inaccuracy of the machine – main topic of interest – is influenced by the machining conditions such as cutting conditions, material to be machined and even the setting of working positions of the machine. For instance, a position of the cross slide is determined by a workpiece height and a position of the lathe carriage that is determined by a workpiece diameter and a travel of the slide that is also determined by a workpiece height. It can be stated then that to predict the machining accuracy of work pieces, it is important to know the behavior of the machine in its all range of working envelope. Based on the information acquired about the behavior of the machine, it can be determined an appropriate position for a workpiece setting that allows utilizing the maximum reachable accuracy with respect to the stiffness and geometrical accuracy of the machine tool. An appropriate setting of initial working position may influence the subsequent geometrical accuracy of a workpiece.
|
| |
|
Design of small vertical turning machine
Rybář, Pavel ; Sýkora, Jan (referee) ; Blecha, Petr (advisor)
Task of this project is design of small vertical lathe. First part is focused on theory of turning technology, sort of lathe types, overview of vertical lathes including description of componets which vertical lathes consist of. At the second part of this project there is performed a propose of the machined part and a propose of cutting machine. The last part of this project provides base structure calculations and analysis needed for design proposal of a small vertical lathe according to specified parametres.
|
|
Replacement of big diametral bearing at mounting of vertically lathe table
Sklenář, Jaroslav ; Skýpala, Milan (referee) ; Marek, Jiří (advisor)
This dissertation deals with table seating at a vertical lathe made by TOSHULIN, a.s. The target is to design such table seating which would replace the existing seating solution with a cross bearing having better technical and economical parameters. The dissertation includes analysis of some chosen variants of table seating; this analysis has been done from several aspects and it is completed by the subsequent evaluation. After the results of multi criterion analysis have been evaluated, I performed calculation as well as designing of two table seating variants in the practical dissertation part.
|
|
Polymerconcret Frame of Vertical Lathe
Buksa, Jan ; Marek, Jiří (referee) ; Foller, Bronislav (advisor)
This work describes construction and calculation of vertical lathe bed designed by request of company TOSHULIN. Apart from a sum of theoretical knowledge, the information contained in it should also serve in practice as a comprehensive guidance for construction vertical lathe bed from this material. The approach is specific by reason of that is necessary to observe functional proportions at contemporary producing part, which is usied for construction vertical lathes. There is a design of construction in this work, which gives better results mechanic, dynamic and thermal features of this part in some way.
|
|
Lathe machines with vertical rotary axis
Mrázek, Petr ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The bachelor’s thesis deals with description and classification of vertical lathe machines. All content is organized into several chapters. The introduction is concerned with history and basis of the turning. Next part describes basic types of vertical lathe machines and important manufacturers. In the end of bachelor´s thesis is simple calculation of the gear pump.
|
|
Description of lathe machines
Nováková, Lucie ; Matějka, Petr (referee) ; Blecha, Petr (advisor)
The bachelor’s thesis deals with description and classification of vertical lathe machines. The text is divided into several coherent chapters. The introduction is concerned with history and basis of the turning. Next part describes basic types of vertical lathe machines and the greatest attention is given to the analyse of particular parts of the machine. The end of the bachelor´s thesis includes some representatives of Czech and foreign producers of the lathe machines followed by the comparison of their products.
|