|
| |
|
|
Vibration diagnosis of machines during routine tests
Kohutek, Tomáš ; Hammer, Miloš (referee) ; Nahodil, Petr (advisor)
This master thesis deals with the vibration diagnostics of machine vibrations during unit tests in industrial company Siemens Electric Machines s.r.o Drásov. In the master thesis is elaborated a design of the diagnostic system which contains selected methods of vibration diagnostics, methology, procedure of measurement and evaluation of measured values. The part of master thesis is also a practical example of measurement on which the mentioned system is tested.
|
|
|
Dependability management
Brlica, Pavel ; Hammer, Miloš (referee) ; Řezníčková, Hana (advisor)
Theme of this bachelor‘s thesis is dependability management. Theoretical part consist of basic definitions of dependability, it describes relationship between dependability and quality and analysis dependability management system. Practical part focus on calculation of dependability coefficients and construct a bathtub curve of a real machine.
|
|
|
Methodology of Inserting Checkers into Digital System
Bartl, Michal ; Straka, Martin (referee) ; Kotásek, Zdeněk (advisor)
The topics described in this diploma thesis belong to the area of digital systems testability analysis. Basic concepts as dependability, controllability, observability and testability are explained. Methods of raising testability and dependability of digital circuits are mentioned including the metrics which allow to evaluate testability parameters. Furthermore, the thesis describes the formal model of digital systems which introduces the implementing part of the thesis. Within this part, a program tool is demonstrated, which allows to identify the components of digital circuits and their function. The other function of the program tool is to create control circuits that check the correct function of such digital circuits.
|
|
|
Usage of Modern Methods for Increasing Reliability of Control System Implementations
Szurman, Karel ; Mičulka, Lukáš (referee) ; Kaštil, Jan (advisor)
At avionics control and critical systems is necessary guarantee a minimal level of fault tolerance and their high reliability. On the electronic components in these devices has an undesirable influence environment conditions and mainly cosmic ray. In this paper are described the most common failure types of semiconductor components and devices together with modern methods which can be increased the system fault tolerance and its overall reliability. There are introduced aspects of the avionic systems design due to finally certification and ways to evaluate its safety. This thesis describes design and implementation of the CAN bus control system for the FPGA platform which uses the CANAerospace application protocol. Created system design is improved by the TMR architecture. Fault tolerance of both system version is tested by the SEU framework which allows using the dynamic partial reconfiguration generate an SEU failures into running FPGA design.
|
|
|
Methods of Reliability Analyses of Operation and Testing Data of Airplanes
Novák, Josef ; Nevrlý, Josef (referee) ; Nejedlý, Ludvík (referee) ; Třetina, Karel (advisor)
The doctoral thesis deals with reliability (dependability) analyses of operation and testing data of the Airplanes. Requirements of airworthiness regulations on aircraft hydraulic systems (with a focus on US FAR-23 and European CS-23 regulations) are taken into account. Mentioned regulations include requirements for the structural design, design of systems, etc. They cover wide range of airplanes from small sport airplanes to 19-seats transport aircraft. Also options for predictive reliability analyses (resources) and reliability tests are discussed in the doctoral thesis. Practical application is done on small transport airplane (currently in the development). The failure report is designed. Expected major contribution of the work is selection and practical application of the most suitable procedures for safety assessment on the field of aircraft hydraulic systems, with a focus on the small transport aircraft. Also the comparison to different data source is shown.
|
|
|
Analysis of the operational risks of newly introduced aircraft types
Sklenář, Filip ; Janhuba, Luboš (referee) ; Chlebek, Jiří (advisor)
This thesis examines the process of introducing a new aircraft into the service, in particular by the steps from initial vision of a new aircraft until after the aircraft. The content of the thesis consists of seven parts. In the first four sections, I describe the organizations involved in aviation and reliability, physical principles of aircraft systems, accident statistics, regulatory requirements. The fifth section focuses on reliability and describes the procedures for the analysis of reliability. The sixth part is focused on the procedure for introducing new aircraft into service and also includes the methodology for eliminating the element of lack of confidence, which was one of the main objectives of this work. The seventh part is a demonstration of the procedure for the introduction of aircraft into operation.
|
|
|
Functional Hazard Assessment (FHA) of 4-seat aircraft
Jakl, Jan ; Weisman, Andrej (referee) ; Hlinka, Jiří (advisor)
At the beginning this master's thesis includes of a comprehensive review of aircraft accidents in this category, 2-6-digit aircraft for passenger transport. Since this work focused on autopilot, so naturally there is a basic overview of most common autopilots, which can be found in these aircraft now, but in the future. Functional hazard analysis (FHA) for the 4-seater plane for passenger services primarily investigates cases of catastrophic malfunction, which in most cases accompanied by the likelihood taken from different databases. The airplane, which is created for this analysis will preferably equipped with instruments for IFR flights. There is also a brief overview of the regulations necessary for the installation of these systems in the airplane. At the end of this work is to design the dashboard, a design layout of equipment for future aircraft, with an emphasis on maximum transparency.
|
|
|
Maintenance of Small Transport Aircraft with Application MSG-3 Methodology
Trefilová, Helena ; Třetina, Karel (referee) ; Finda, Jindřich (advisor)
Master’s thesis deals with problems of maintenance of small transport aircraft with application MSG-3 methodology and maintenance plan development. It is aimed at systems and powerplant maintenance. This method is applied on L-410UVP-E20 aircraft. Other parts of this work are assessment of recent situation in maintenance of airplanes, used approaches to maintenance, methods and documentation for maintenance. Last part of this work is practical example of MSG-3 process on assign item and its interpretation.
|
|
|
Research of Static Electricity Meters Reliability
Voborník, Petr ; Polsterová, Helena (referee) ; Szendiuch, Ivan (advisor)
This work deals with setting of dependability of static electricity meters. The first two chapters deal about electricity meters and dependability in general than there are introduced three possible ways for getting dependability parameters. The first methode is data collection from the field. The second methode is reliability prediction from component's reliability. The third methode is aging life tests. Conclusion contains evaluation of results and highligting of importance for practical usage.
|
guest ::
