National Repository of Grey Literature 44 records found  beginprevious15 - 24nextend  jump to record: Search took 0.01 seconds. 
Audio D/A converter used for laboratory measurements
Abrman, Milan ; Stifter,, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
The aim of this thesis is design stereo digital to analog convertor for school laboratory usage. Scope of the thesis covers the design of all the functional units: input signal circuit, S/PDIF receiver, D/A converter, high quality analog output stage with active low pass filter. Thesis also cover design of all control and indicating parts containing microcontroller with control parts, alphanumeric OLED display and setting indicators.
Measuring Unit Controlled by Computer
Žižka, Josef ; Dřínovský, Jiří (referee) ; Šebesta, Jiří (advisor)
The object of this work is to meet readers with the basic principle and solution of universal measuring cards for personal computer, project and realise own „Measuring Unit Controlled by Computer“. Comparing parameters nominated unit with commercial using devices. The project describes contituent elements like set analogue inputs for measuring of voltage and current, analogue outputs, digital inputs, digital outputs and counter. The work deals with using standard interface USB for communication between measure unit and host by personal computer. And explanations control program of the microprocessor.
Simulator of voltage output 0-10V
Mačišák, Martin ; Baštán, Ondřej (referee) ; Bradáč, Zdeněk (advisor)
This bachelor's thesis deals with the design of the voltage output simulator in range of 0-10 V with microcontroller. The part of my bachelor's thesis is theoretical outline of whole system, draft of this system and draft of source. Further creation of wiring diagrams and PCB. Fitting of PCB and programming. This thesis checks up the functionality of the draft and also of whole system. Next outputs are compare with required outputs. Literary research is integral to my bachelor's thesis.
General purpose analog signal converter
Strážnický, Martin ; Povalač, Aleš (referee) ; Kubíček, Michal (advisor)
This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.
Adaptable video A/D converter
Maňas, Stanislav ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
Master's Thesis deals with the complete proposal of light adaptability A/D converter. In the second chapter there are describes types of sensors. Third one describes the most used methods of light adaptability. In the fourth chapter there is describe the adaptability A/D conversion. Chapter 5 describes the block diagram. In the sixth chapter there is the design of all blocks of A/D converter. Finally in the chapter 7 there are construction documents for realization.
The realization of measurement workplace for simulation and testing of AD converters
Panáček, Jiří ; Fujcik, Lukáš (referee) ; Háze, Jiří (advisor)
The objective of this thesis is a design of a development kit, which is used in laboratories during the lessons of Theory of analog to digital conversion subject. This device is adapted for basic measuring and understanding of digital to analog (D/A) and analog to digital (A/D) converters and contains sigma-delta A/D converter made of basic elements, D/A converter with R-2R resistor net, active low pass frequency filter (Sallen-Key), PWM generator, SAR A/D converter with 16 b resolution, reference voltage source and module for measuring integral and differential nonlinearity of A/D converters. The modules are available connect to each other via jumpers and they are driven by microcontroller. This solution gives various modes of operation, which can be selected by user via buttons. Development kit has five BNC connectors for securing connectivity to an oscilloscope or a signal generator. The device also contains universal serial bus connectivity for use with personal computer or laptop, which is really useful with Matlab software for automation processing of measuring.
Modification of 2. Ziegler -Nichols method.
Jaššo, Kamil ; Burlak, Vladimír (referee) ; Pivoňka, Petr (advisor)
This thesis will be focused on verification of usage of time-delay caused by discrete controller's converters for setting it's parameters by Ziegler-Nichols frequency method in cases when this method fails.
Electronic load
Škotnár, Martin ; Pavlík, Michal (referee) ; Boušek, Jaroslav (advisor)
This thesis deals with electronic load design. In the beginning of the thesis, the necessary theory for understanding the basic properties and principles of electronic loads is described. Current control is provided by a touch screen and a microprocessor. The work presents a detailed design procedure in terms of hardware and testing, as well as a printed circuit board design procedure. The result of the work is a fully functional electronic load. The main use consists in testing equipment such as power supplies and accumulators.
Audio Amplifier with Network Streaming and Sound Equalization
Liska, Matej ; Zeman, Kryštof (referee) ; Štůsek, Martin (advisor)
Diploma thesis contains the theory for the design and realization of a prototype audio amplifier device with the possibilities of digital or analog input content. It approach the features of D/A converter, analog filtering, volume control and amplification. Besides others, it describes the regulation of supply power voltages for individual active parts of device and approaches the software audio platform for acquisition and processing of audio data, including equalization. The thesis contains an general schematic design, created placement of individual components on board, including their table of descriptions and evaluation of the achieved results, including measured values and graphs.
General purpose analog signal converter
Strážnický, Martin ; Povalač, Aleš (referee) ; Kubíček, Michal (advisor)
This work deals with the design of a galvanically isolated converter of continuous analog signals and the design of a galvanically separated converter of digital TTL signals to HTL signals. The device is complemented by a STM32 microprocessor, which ensures the connection of analog input and output. The result of the work is the circuit structure of individual units, the results of simulations of important units, complete data for the production of device and measured values of individual units.

National Repository of Grey Literature : 44 records found   beginprevious15 - 24nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.