National Repository of Grey Literature 23 records found  beginprevious14 - 23  jump to record: Search took 0.00 seconds. 
Color Correction for 3D scanner and 3D printer
Kratochvíla, Michael ; Dorazil, Jan (referee) ; Říha, Kamil (advisor)
This thesis deals with color correction of a chain that starts with the 3D Artec MHT scanner, and ends with the 3D printers (CJP – Color Jet Printing technology). In principle, it is necessary to control the color interpretation of the entire chain from the scanning of real models to the 3D print model. With color properties and their color shade, including color textures. The principle of model surface scanning using a 3D scanner is in the same principle as photo camera which scans using a conventional CMOS chip. For this reason, color palettes were scanned using the photo camera and the resulting digital data were analyzed by the Darktable software. This analysis consisted of comparing the scanned color shades of the surface with the spectrofotometer measured data. The main goal of this method was to achieve color precision in the digital data during their acquirement, adjustment and interpretation. Then the same principle was applied to the data acquired by the 3D scanner to create an ICC profile of the 3D scanner. Because the 3D printer (CJP – Color Jet Printing) uses the same principle as the 2D printer, the 2D printing device calibration principle was used again to calibrate it. There have been defined procedures that adjust the color shade to the spectrophotometrically correct shades of the resulting print on a 3D printer. Color swatches were also printed for print quality verification. It has been found that with photo camera, which was used for objective measurement in the L*a*b* coordinates of independent space, any color setting and their adjustment is very sensitive to even small imprecisions. It has been found that it is not easy to obtain accurate colors within the Detla E
Creating a 3D model and its realization on a 3D printer
LIŠKOVÁ, Markéta
The aim of this bachelor work is the creation of a 3D model and its realization. As the product of the 3D printing demonstration is chosen a bike bag for money and keys, which is placed under a seat on a seatpost. The theoretical part of the bachelor work presents a brief history about 3D printing, 3D printing technologies, editors for creating models and basic materials. The model is designed in an online editor TinkerCad. The printing is done by Fused Deposition Modeling (FDM) technology on the Original Prusa i3 MK3 printer. A part of the work is a simple handbook, which describes on a trolley coin with the JCU logo, how to create your own model and how to print it on the FDM printer.
The production process of making books, from text to finished media
Frydecká, Markéta ; Khabirova, Maja (advisor) ; Horný, Stanislav (referee)
The theme of this work is book creation, editing, typesetting and printing. In the first part, thesis brings options for choosing binding, format, paper and font. It also provides a clear and comprehensive insight into the issue of typesetting and briefly describes what needs to be taken into account when considering the book and what is good to remember when exporting it. Thesis also briefly introduces printing techniques and offers an overview of finishng works. In the second part, there are findings from the first part taken and used to typeset a novella Návrat and next activities related to printing and finshing book are described. As well current book publishing practise is outlined in the second part.
Biography and Works of Printer and Wood-Cutter Michael Peterle (†1588)
Tvrzníková, Jana ; Voit, Petr (advisor) ; Veselá, Lenka (referee)
Thesis about life and work of a printer and a woodcutter Michael Peterle is focused mainly on his assumed woodcutting activity (he was active between years 1562-1588). It is based on following assumption: although Michael Peterle did not sign his woodcuts, he illustrated portion of his prints. His printing office produced multitude of topical compositions and some interesting illustrated books. Photodocumentation and description of woodcutting illustrations and decoration (according to Soupis tisků Michaela Peterla staršího a jeho nástupců by Pravoslav Kneidl and more recent sources) was created during writing of this thesis. Attention was also focused on context of usage of illustrations. Afterwards Illustrations and decoration of Peterle's competition in the Czech Republic and Germany were examined. Conducted research showed, that Michael Peterle was not woodcutter, but only a colorist and a printer. This thesis provides another view on printing production in the second half of the 16th century. Key words: Peterle, Michael; printer; bookprinting; woodcut; illustration; decoration
Front-pages and illustrations of the sixfold Bible of Kralice
Keřkovská, Marta ; Royt, Jan (advisor) ; Nespěšná Hamsíková, Magdaléna (referee)
Front-pages and illustrations of the sixfold Bible of Kralice The Bachelor thesis will be aimed at the illustrations of the sixfold Bible of Kralice published gradually from 1579 to 1596. First of all, the Ivančice and Kralice printing house will be introduced. Its origin and activities will be dealt with. Afterwards, it will be necessary to explain the printing technology which was used by the printers of Ivančice and Kralice in their publications. The thesis will also talk about the printers of the house and their sources of inspiration. Eventually, if the printers' works are identical with these sources they will be compared. The main part of the thesis will be especially focused on iconographic description of the front-pages in particular parts of the Bible. The thesis will also mention Jiří Melantrich's printing house which printed Bibles approximately in the same time as Ivančice and Kralice printing house. The printer will be briefly introduced and so will his published Bible. The end of the chapter will focus on the comparison of the Ivančice and Kralice printing house with Melantrich's printing house. Keywords Key words: Bible, bookprinting, printing house, graphics, iconography, history, Ivančice, Kralice
Property record based on RFID technology
Černý, Jakub ; Dydowicz,, Petr (referee) ; Kříž, Jiří (advisor)
This bachelor work focuses on the study of the modern technology of RFID tags and its application at Faculty of Business and Management in Brno. The main subject of this work is to use this technology as a replacement of barcode technology with the intention of raising processing speed, effectiveness and protection against stealing.
Project of Home Network
Makovský, Vladimír ; Kobelka, Miroslav (referee) ; Ondrák, Viktor (advisor)
The goal of this bachelor's thesis is to project a small local computer net for a family living in a family house. Here is the description of processes that are necessary for implementing a computer net so that the members of the family could use this computer net in accordance with their requirements.
Design of Printer
Morcinek, Lukáš ; Bukvald, Jiří (referee) ; Křenek, Ladislav (advisor)
The subject of this bachelor thesis is to design a small sized inkjet printer for domestic use. The objective of the design is to create functional concept respecting technical, ergonomic and aesthetic requirements.
The printing office and the villa of Alois Landfras in Jindřichův Hradec
SLOUKOVÁ, Kristýna
The bachelor thesis The printing office and the villa of Alois Landfras in Jindřichův Hradec deals with built of printing office and villa with garden and it primarily examines its in artistic and historical terms. The first part of thesis deals with history of printing craft in Jindřichův Hradec, with builder Alois Landfras and with architect Josef Schaffer. In the next part of thesis the author deals with built of printing office, with question of dating its rebuilding, with reconstructions of object and it was constructed architectural description of house facade. The following chapters are focused on Landfras´s villa with garden. The interesting point is doubt of dating beginnig of villa´s building based on literature and charter of the villa. Author´s other interest was providing of garden complete description and describe its original form based on historical photos. Afterwards author points out earlier purpose of object because during Alois Landfras´s life villa with garden had primarily cultural meaning. Next chapter examines the relation between Alois Landfras as a builder and Josef Schaffer as an architect. In last part author deals with garden analysis in style element term and she tries to find inspiration or archetype of the architectural work.
Buyer´s decision process in the printer market
Čuřínová, Simona ; Koudelka, Jan (advisor) ; Král, Ludvík (referee)
The goal of this diploma thesis is to analyze the buyer's decision process in the printer market for household. The most important of the theoretical part is the description of the whole process. The thesis is also focused on the different views on the buyer's decision process, description of factors, which influence the decision flow and on different types of the process. In the analytic part is the main attention sticked at the research of buyer's decision process in the printer (multifunction) market for households. It is based on questionnaire survey. Summing up and marketing recommendations are mentioned at the end of the thesis.

National Repository of Grey Literature : 23 records found   beginprevious14 - 23  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.