|
|
Pendulum jaw crusher 900 x 500
Hladík, František ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis is concerned with a construction design of single toggle jaw crusher DCJ 900x500. In the first part, the theoretical background and ways of material disintegration are discussed. The second chapter describes types of material crushers in general, especially jaw crushers and their parts. The third chapter is concerned with calculations and the design of the most important parts of the machine. The fourth part consists of the crusher power calculation, design of the pendulum and its production technology. The last part includes the result of FEM analysis for the particular variant of pendulum production. The thesis also includes drawing documentation of the crusher and the pendulum.
|
|
|
Mathematical modelling with differential equations
Béreš, Lukáš ; Šremr, Jiří (referee) ; Opluštil, Zdeněk (advisor)
Diplomová práce je zaměřena na problematiku nelineárních diferenciálních rovnic. Obsahuje věty důležité k určení chování nelineárního systému pouze za pomoci zlinearizovaného systému, což je následně ukázáno na rovnici matematického kyvadla. Dále se práce zabývá problematikou diferenciálních rovnic se zpoždéním. Pomocí těchto rovnic je možné přesněji popsat některé reálné systémy, především systémy, ve kterých se vyskytují časové prodlevy. Zpoždění ale komplikuje řešitelnost těchto rovnic, což je ukázáno na zjednodušené rovnici portálového jeřábu. Následně je zkoumána oscilace lineární rovnice s nekonstantním zpožděním a nalezení podmínek pro koeficienty rovnice zaručující oscilačnost každého řešení.
|
|
|
Proposal of test equipment/method for quick verification of quality of welded joints
Zejda, Václav ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
This bachelor’s thesis is dealing with the proposal and the choice of the proper method for quick check of weld seams of ball pivot of automobile stabilizers created by the resistance welding method. The first, theoretical part deals with the resistance welding. The second part deals with a description of the production process and testing of the particular component. The last part contains personal proposals and an assessment of the suitability of use of each construction solution of simple mechanical devices for quality checking of the weld seam. The recommended method to use is the Charpy impact test which served as the base for designing the special test device.
|
|
|
Pendulum excitation
Vrána, Jiří ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
This thesis is focused on creating a model situation of excited pendulum with one degree of freedom that oscillates in both linear and nonlinear condition. The theoretical part describes several basic concepts of oscillation theory and states some examples of pendulum applicability. The practical part consists assembling of motion equations of model situations, based on which simulations programs are created. The thesis contains also concept of practical use of the nonlinear pendulum model.
|
|
|
Pendulum jaw crusher 1 600 x 1 250
Ješuta, Jiří ; Malach, František (referee) ; Malášek, Jiří (advisor)
This thesis deals with the design of the construction of a pendulum of a single toggle jaw crusher. The first part of this thesis treats the mechanical raw minerals disintegration. In the second part the characteristics of a single toggle jaw crusher and double toggle jaw crusher are compared. The third part addresses the calculation and the construction of the main components of the jaw crusher. Next part of the thesis consists of the calculation of the crushing force, the pendulum design, and the method of manufacturing a pendulum. The strength analysis of the designed pendulum using the finite element method (FEM) in program NX-Ideas is made in the last part of this thesis.
|
|
|
Pendulum jaw crusher 700 x 300
Kopecký, Libor ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma thesis deals with construction design of a pendulum for the jaw crusher DCJ 700x300. The first part of the thesis is dedicated to treatment of mineral materials with focus on minimizing minerals. The second part deals with devices used for crushing minerals, jaw crushers and their variants in particular. The third part is devoted to specific design of the jaw crusher based on assigned input. The next part deals with construction design of the pendulum and technology of its production exploring weldments and casts. The aim of this thesis is to perform a strength analysis of the chosen version of pendulum production using the FEM method. The diploma thesis includes drawing documentation of the jaw crusher and the pendulum.
|
|
|
Pendulum jaw crusher
Pitner, Jakub ; Jurásek, Jiří (referee) ; Malášek, Jiří (advisor)
This master thesis deals with structural design of pendulum for single toggle jaw crusher DC 110x70 and consists of several main parts. The first part focuses on the processing of mineral materials, especially on the process of mechanical uncoupling. The second part compares main characteristics of single toggle and double toggle jaw crushers. The third part deals with the structural nodes for the crusher DC 110x70. Another part is consisted of two variants for the pendulum construction with a comparison of the advantages and disadvantages. For the selected variant is carried out the stress control using Finite element method (FEM) in the program I-DEAS. The last part focuses on the positioning an exit slit for designed pendulum.
|
|
|
Design of self-balancing mobile robot
Bartončík, Michal ; Hrabec, Jakub (referee) ; Šolc, František (advisor)
This thesis treatise about design self-balancing wheelframe type of segway. Introduces the principle of segway, the original models and solutions other people. The simulation uses a mathematical model to determinate the characteristics of senzors. Selection the method of measuring the angle and implementation with the help of sensors. Furthermore, deal with engines for moving of model, multifunction I/O card and desktop board for processing signal from sensors. Their connections and attechments on the construction.
|
|
|
New trends in the field of stone mastic asphalts
Pfeiferová, Magdaléna ; Varaus, Michal (advisor)
The work consists of two parts. The first part is focused on the determination of an anti-skid properties of the test section on Vídenská street. The anti-skid properties will be measured using a pendulum tester and macrotexture will be set at the same time. Microtexture will be measured using a volumetric patch technique. In the second part we will try to gain an initial experience with design and testing of a low noise stone mastic asphalt. We will set basic characteristics and at the same time compare with a standard stone mastic asphalt. For the comparison two various bituminous binders are used. The water sensitivity, resistance against rutting and stiffness moduli are compared.
|
|
|
Speed meassurement of the bullet in the physics practicum
SCHOBEROVÁ, Zdeňka
The main subject of this bachelor{\crq}s thesis is the laboratory measurement of an airgun bullet velocity. Elementary ideas of ballistics are theoretically discussed and, afterwards, two elementary measurement methods are described in detail and experimentally verified. First method is based on a couple of rotating discs and the second one is based on the energy conservation law of a ballistic pendulum. In the thesis there are presented both the description and the results of these measurements.
|
guest ::
