|
|
Switched Mode Power Supplies
Španěl, Petr ; Lettl,, Jiří (referee) ; Kadaník,, Petr (referee) ; Procházka, Petr (advisor)
This thesis deals with switched mode power supplies based on resonant principle to achieve high efficiency. Several ways of switched mode power supplies optimalisation are described as part of the work to achieve better efficiency. Priparily, the new generation of switching elements based on SiC and resonant topology are used to achieve significant switching loss minimization. The selected resonant topology is simualted in detail and then built with focus on high efficiency. The main content of the work consists in the design and realization of the switched mode power supply with selected control algorithms and their comparison. The problems associated with usage of new SiC MOSFET generation in TO-247-4L package are being solved within the design and implementation of the power source. To solve the main problems, new 3rd SiC MOSFET gate driver was developer for working with switching frequencies in hundreds of kHz and resisting very high voltage stress on the controlled transistor. The next part of the gate driver is the overcurrent protection. The overcurrent limit can be set easily by changing one component. This protection reacts very quickly in hundreds of nanoseconds, so it is capable of saving the converter even in branch failure and going to hard short circuit. The functional sample of the series resonant converter was built and revated in the work. The converter based on 3. Generation of SiC MOSFET transistors from Cree in a modern case TO-247-4L was built. For this inverter, it was also necessary to develop both the control scheme and the resonance frequency tracking to achieve accurate switching and thus achieve the use of the resonant principle of the converter to the maximum extent possible. The result of this work is up to 3 kW converter with adjustable output voltage while maintaining high efficiency up to 96%.
|
|
|
Power supply for space application
Hrubý, Lukáš ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
The following work deals with a design of switched mode power supply. In this essay, there is detailed description of non-isolated and isolated topologies of SMPS, used in industry. Next, there are calculations for design and analysis which are needed for space design. There will also be selected devices, which could be used in final device. Based on experience and ECSS requirements, there will be chosen parameters of SMPS, which could be then used as a module for future space design. Chosen topology of SMPS will be created as engineering model assembled with commercial components. One part of this work is dedicated to design and realization of planar transformer and coupled inductor.
|
|
|
Laboraty Pulse Power Supply Using Output Linear Stabilization
Lednický, Marek ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This thesis deals with switched mode power supplies. The theoretic part of the thesis consists of historical development and the elementary schemes of switched mode power supplies. It also includes the comparing with linear regulators. Next, it contains the description of individuals parts switched mode power supplies as a rectifiers, power supplies and stabilizers. There is a proposal and fixing of laboratory pulse power supply using output linear stabilization in the practical part of the paper.
|
|
|
Precise LED lamps dimming for stage technology
Šojdr, Marek ; Šteffan, Pavel (referee) ; Levek, Vladimír (advisor)
This bachelor´s thesis discusses the problems of dimming of LED bulbs using DC voltage. It explains basic converters topologies and power factor correction options. Part of the thesis deals with the subharmonic oscillation and possibilities of its elimination. Describes the design of the circuitry of dimmer module for precise dimming of selected types of LED bulbs, revival and testing of the dimmer module. Part of the work is basic for realization of the dimmer (printed circuit board, list of components).
|
|
|
High effective switched power supply
Rástočný, Martin ; Kledrowetz, Vilém (referee) ; Pavlík, Michal (advisor)
This bachelor’s thesis analyses theoretical basis of switched mode power supplies. Selections of right topology for implementation, design of power and control circuits are discussed. The thesis also contains a brief summary of switched mode power supplies. Subsequently it focuses on calculations and selection of appropriate power components. A result of the thesis lies in development and practical design of switched mode power supply and its optimization for high effectivity of conversion. To achieve these theoretical calculations of parameters for chosen topology were made.
|
|
|
Laboraty Pulse Power Supply Using Output Linear Stabilization
Lednický, Marek ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This thesis deals with switched mode power supplies. The theoretic part of the thesis consists of historical development and the elementary schemes of switched mode power supplies. It also includes the comparing with linear regulators. Next, it contains the description of individuals parts switched mode power supplies as a rectifiers, power supplies and stabilizers. There is a proposal and fixing of laboratory pulse power supply using output linear stabilization in the practical part of the paper.
|
|
|
Laboraty Pulse Power Supply Using Output Linear Stabilization
Lednický, Marek ; Dušek, Martin (referee) ; Šebesta, Jiří (advisor)
This thesis deals with switched mode power supplies. The theoretic part of the thesis consists of historical development and the elementary schemes of switched mode power supplies. It also includes the comparing with linear regulators. Next, it contains the description of individuals parts switched mode power supplies as a rectifiers, power supplies and stabilizers. There is a proposal and fixing of laboratory pulse power supply using output linear stabilization in the practical part of the paper.
|
|
|
Switching power supply with zero voltage switching
Pešl, Jiří ; Pavlík, Michal (referee) ; Boušek, Jaroslav (advisor)
Diploma thesis describes the design of an switched mode power supply with switching at zero voltage for driving the anode of Anode-layer type ion source. First aim of thesis is ion sources and specialy Anode-layer type of ion source in detail. Main aim of thesis are important aspects of the design of switching mode power supply, which comes later the detailed construction of an switched mode power supply with output voltage 2800 V at output power 2800 W.
|
|
|
General-purpose power supply with microcontroller
Jorda, Ivo ; Vyskočil, Pavel (referee) ; Brančík, Lubomír (advisor)
The aim of this thesis is design of adjustable switched mode power supply with symmetrical output of 25 V, and switched mode power supply with fixed output voltage of 5 V. Required maximum output current of each outputs is 3 A. At the beginning of the paper function of the basic SMPS topologies is described. Next all reqiured SMPSs are designed and chosen parts of the design are simulated. In the second half of the thesis assembly and testing of PCB are described as well as functions of programs. Last chapter contains results of meassurement of power supply paramters.
|
|
|
Power audio amplifier with AC/DC converter
Melša, Vojtěch ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
|
guest ::
