|
|
Model the flow of coolant in electrical machine
Potyš, Jiří ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The thesis is focused on possibilities of asynchronous motors cooling with use of simulation at ANSYS Workbench program. It is divided into two parts. The first part deals with analyses of cooling medium circulation through ventilator and cooling medium circulation on the motor surface. As a result of the analyses is air speed distribution and air pressure representation. The second part of the thesis includes simulation of motor temperature rise both with cooling and without cooling at Ansys Workbench application together with temperature measurement of real asynchronous motor in the laboratory. For cooling purposes air circulation was used. The goal of my research is comparison of the computing results with the measured results.
|
|
|
Simulation models of electric drive vehicles
Bílý, Lukáš ; Huzlík, Rostislav (referee) ; Havlíková, Marie (advisor)
The work deals with creating a DC electric motor drive. The model is composed of electrical power from the engine model and transistor pulse converter load, which are joined together and completed the anchor and regulate the flow control engine speed. Great attention was paid to the determination of losses in the load drive electric vehicles and create a model of electric power load. The real work was verified by an experimental model of an electric vehicle Car4 the available parameters.
|
|
|
Improvement Power Parameter of Small Induction Motors
Kuda, Roman ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
This master´s thesis treats of all asynchronous motor. The project is about type and distribution motors, about differences between three-phase and single-phase machines and efficiency. In one of the chapters describes a particular type of engine with all the parametersfrom the manufacturer. This engine is completely analyzed and it is measured in detail. Then the project deals with the division, the calculation of losses and subsequent possibilities to increase the efficiency of induction motor. In the last chapter is calculation of single-phase motors, based on the engine produced.
|
|
|
Calculation of parameters of induction motor using FEM
Pešek, Michal ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This project is focused on finite element method, for purposes of asynchronous motor modeling. Program FEMM is used here, which works with two-dimensional models. The model is based on an existing motor. Then was conducted a series of simulations that are used to calculate the parameters of the circuit model. Then was measured the existing asynchronous motor and performed the calculation of the circuit model parameters of the motor. Compared with data obtained from motor and models Then was compared their torque characteristics. Moments was identified at certain slip frequencies and voltage or current in circuit model.
|
|
|
Temperature measurement in electrical machine using Labview
Strmeň, Milan ; Makki, Zbyněk (referee) ; Janda, Marcel (advisor)
This work deals with using of virtual instrumental program LabView as a tool for thermal measuring at the surface of asynchronous engine. Its part is managing of problems of measuring by the aid of thermocouple, mainly conversion of thermoelectric voltage on temperature. The product of work is program which measures and displays required form and records values of temperature from four parallel branches of thermocouples.
|
|
|
Measurement of thermal field in electric machines
Dostálek, Martin ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
Diagnosis temperature is one of the most important disciplines. We meet it in everyday life, but it is very important for all sectors of industry. This is a measurement providing an immediate state of the measured object. Contact measurement of different temperature sensors and contactless measurement using thermal imagers. The important part is the measurement of temperature rise of induction motor. Part of the work deals with losses in the electric motor. These losses are converted into heat, which affects from various parts of the machine. Correct identification of the temperature field is important in helping to design the cooling system of the instrument. Virtually the data obtained are compared with theoretical data. We will capture part of the device and realize thermal simulations in a suitable simulation program. We propose modifying the cooling machine and the resulting data from the simulation compares.
|
|
|
Small Electrical Machines Optimization
Koutný, Ondřej ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Elektrické stroje se používají v mnoha oblastech života spo¬lečnosti a vyrábí se ve velkém množství a sortimentu. Jedním z nejvíce používaných druhů jsou elektrické stroje malého výkonu na malé a nízké napětí. V širším smyslu názvem malé elektrické stroje označujeme takové stroje, které mají výkon menší než 1 kW (1000 W). Z hlediska užití můžeme rozdělit malé elektrické stroje na stroje pro obecnou potřebu a pro automatizační zařízení. Jedním z nejvíce frekventovaných druhů malých elektrických strojů jsou elektrické stroje na malé napětí, t.zn. na jmenovité napětí do 50 V.
|
|
|
Single-Phase Induction Motor Calculation
Schlesinger, Petr ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
This master’s thesis’s target is to introduce the basic findings about single-phase asynchronous motors, their derivation from three-phase motors and the basics of a computation process and a concept of a single-phase asynchronous squirrel cage motor. The inbeing of this concept and the computation is created by classical processes for three-phase motors with a low voltage, 50 Hz.
|
|
| |
|
| |
guest ::
