|
|
Detached house with architectonic studio
Fafílková, Jana ; Svobodová, Sylvia (referee) ; Petříček, Tomáš (advisor)
The aim of this bachelor´s thesis is a project of a new detached house with a design office at a level of the documentation for the structure realization. The detached house is situated in a small town Blížkovice. The building is partly basement with two above-ground floor with a flat roof. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up of system Heluz. The land is sloping toward the northsouth.
|
|
|
Construction Project - Implementation of Administrative Building for Ray Service, a.s. in Staré Město
Seménka, Petr ; Diaz, Yvetta (referee) ; Nečasová, Barbora (advisor)
The content of this thesis is a construction technology project of a new office and production building for company Ray Service a.s. in Staré Město near Uherské Hradiště. The thesis contains technical reports, construction technology study, design of transport ways, technological regulations of demolition and earthworks and regulations for construction of foundation structures. Furthermore is made design of the main machine assembly, inspection and test plan and the design of the construction site, including a technical report. Finally is made a project for the construction of area roads including time plan, LEED certification, noise study and comparison of the main lifting mechanisms.
|
|
|
Apartment house Polička
Nespěšný, Ondřej ; Král, Jakub (referee) ; Sedláková, Markéta (advisor)
The bachelor thesis “Apartment house Polička” is focused on the creation of project documentation for a block of flats, which has three floors, a partial basement and a flat roof and is built in mildly steep ground. From the constructional point of view it is a simple building which does not disrupt built-up area in Bezručova locality and is in compliance with local planning of the town Polička and its valid housebuilding regulations. In the building there are 12 flats. The area of basement will be used for technical devices and 12 cellar cells will be at the disposal of the flat owners. The building is masonry and thermally insulated by facade boards.
|
|
|
Apartment building
Lakosil, Martin ; Novák, Michal (referee) ; Fuciman, Ondřej (advisor)
My bachelor thesis deals with construction of apartment building. The content of the thesis is a project documentation for building construction. The object is located in the cadastral territory of Náchod. There are two flats on each groundfloor. On the second and third floors, there are apartments for families of four and on the first floor there is one apartment for a family of three and one for a family of four. Each apartment has its own basement cubicle. Basement cubicles are located in basement where is also a utility room. The object is designed as a self standing apartment building with basement and three floors. It is a prefabricated building from the POROTHERM system, the basement is prefamonolitic from blocks BEST (sacrificial formwork) and it is has rectangular plan. The whole object is covered with a flat roof with a slope of 3 %.
|
|
|
Family House on the Slope
Šlahůnek, Zbyněk ; Hobzová, Klára (referee) ; Košíčková, Ivana (advisor)
The Bechelor‘s thesis is focused on a newly-built family house in Uherský Brod. Uherský Brod is town in the region of Zlín. The plot is situated on the outskirts of the town in a mildly built-up area. The terrain is sloping to Nort-East. The structure is a two-story building with a partial basement. The building foundations are based on the reinforced concrete foundation strips. The load-bearing structures of the basement are formed by permanent formwork. The second floor designed from Ytong system, specifically from thermal insulation block. The floor structure is cast-in-place reinforced concrete. The building is roofed with warm flat roof.
|
|
|
Kindergarden, Králíky
Kandráčová, Miroslava ; Vlach, František (referee) ; Bečkovský, David (advisor)
The subject of the diploma thesis is the processing of the construction-technical part of the project documentation for the construction of a new kindergarden building in the town of Králíky. The building is divided into two parts - part of the kindergarten and part of the kitchen and laundry facilities. Part of the nursery school consists of three departments, communication space, multipurpose hall and administrative space. In the second part is a cloakroom for staff, kitchen with facilities, laundry and utility rooms. Both parts have separate main entrances. The building consists of two floors and one underground floor. Above part of the nursery school there is a sloping saddle roof structure consisting of wooden nailed trusses. Above the farm part there is a flat single-skin roof with a vegetation layer. The foundation structure under the walls of the building is formed by foundation strips, under the columns the foundation structure is formed by foundation feet. The vertical load-bearing structures are masonry from lime-sand masonry blocks in the above-ground part of the building and in the underground part of the building the vertical load-bearing structure is formed by fittings made of permanent formwork filled with reinforced concrete. Horizontal load-bearing structures are solved by prestressed cavity ceiling panels. The whole building is insulated. In the above-ground part of the nursery school is used contact thermal insulation system with pasty plaster, in the above-ground part of the remaining part of the building is used ventilated facade with fiber-cement facade boards
|
|
|
Pension
Veřmiřovský, Martin ; Hudcová, Šárka (referee) ; Čuprová, Danuše (advisor)
The subject of my diploma thesis is a new-build quest pension in Čeladná. The building has two above-ground floors in the first part and one floor is in the second part. The pension is partially with a cellar and i tis located in the periphery of tve village on nearly flat terrain. The second floor is only for pension quests. On the first floor, there i salso a restaurant with a covered terrace. The perimeter load-bearing walls of above-ground floors are mad of Porotherm brick blocks, underground walls are made of BUILD IN concrete blocks. The ceiling structure consists of a folded ceiling of prestressed spiral ceiling panels spiroll. The roof above the second floor is formed as a double-skin flat roof. A vegetation single-skin flat roof is designed above the first floor. The parking for visitors is located on the east side, also the parking for the epmloye is designed on the south side.
|
|
|
Public library
Kavečková, Hana ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The Thesis deals with a design and project documentation for the public library in Ivanovice na Hané. The construction was designed as the four-floor object with a partial cellar. The ground plan creates a rectangle. The object is roofed with a warm deck flat roof. In the basement, an archive area and a utility room prevail. On the first floor of above-ground, there is a space for public and employees. In the separated area, the Confectionery equipped with own sanitary facility for customers and employees is located. There is a spacious entry hall with the access to individual floors. On the second floor, the free library and the children´s department are situated including a lecture hall with own facilities above the Confectionery. On the third floor, there are the library headquarters and the reading area. You can find the sanitary facilities for public on each floor. The object structure is made of a monolithic reinforced concrete skeleton filled with the masonry from acoustic ceramic tiles on the above-grounded floors. In the basement, the structure is created by reinforced concrete walls and walls from the formwork. The ceiling is made of reinforced concrete prestressed panels. The object is based on the ground slabs. In the area of lift shafts, the structure is from the reinforced concrete slab. The walls in the basement are insulated with the XPS polystyrene; in the above-ground area by mineral wood boards and ventilated facades.
|
|
|
Guest house with restaurant
Saj, Marek ; Krupica, Roman (referee) ; Müller, Jan (advisor)
Goal of this diploma thesis is processing of the design project documentation of guest house with restaurant. Designed building is placed at flat terrain at plot of number 2016 in municipality Hradec nad Moravicí, cadastral area of Hradec nad Moravicí [646814]. Guest house with restaurant has approximately shape of two rectangles, that together looks like capital letter t. Building has overall dimensions in length 36 m and in width 22,54 m. Detached building is building without cellar, when the part of restaurant is single-storeyed with mono-pitched roof and there is placed the restaurant, kitchen, facilities guests, staff facilities and technical facilities. The part of quest house with mono-pitched roof is two-storeyed and there is placed quests rooms and facilities. Vertical and support construction comprises the permanent formwork Velox system, floor structure is reinforced concrete slab.
|
|
|
Family house with surgery
Výšek, Jan ; Petříček, Tomáš (referee) ; Kacálek, Petr (advisor)
The project is solving object for living. Is it family house with the private physioterapist’s surgery. The object is standing separately and has two floors above ground and one floor under ground. The 2nd floor is solved as attic. For masonry is used material ceramic bricks with the ETICS, the ceiling is made from POT & MIAKO systeme with reinforcing components. In underground floor is used material the lost formwork concrete blocks with the armature and additional insulation. For the roof is used combination of saddle roof and hip roof, with angle 35 degrees. Object is located in peripheral locality of the city Jaroměř. Surrounding terrain is flat.
|
guest ::
