|
|
Equipment for pressing the cataract into the injection pump housing.
Trutna, Pavel ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The goal of this work was the engineering of a new machine for pressing the cataract into the injection pump VP30 housing. Based on criteria from the point of view of ergonomics, assembly, shape of the housing and costs, the machine has been engineered so as to clamp the pump housing and press the cataract into the appropriate housing channel. Machine designing has been performed using 3D CAD software which is able to provide drawings and 3D data.
|
|
|
Design of Universal Equipment for Tire Cutting
Kohoutek, Petr ; Veselý, Oldřich (referee) ; Prokeš, František (advisor)
The main content of of this thesis is a construction design and analysis of a machine for cutting tires. The resulting solution emerges from the design options and the option that meets the best selection criteria is chosen. Then the thesis stops for a while at the choice of cutting technology and tries to exemine its suitability for cutting tires. In its other part there is an attempt to clarify the relevant parts of the machine, where the benefits of three-dimensional views is used. Basic design and check calculations are done in the selected machine parts.
|
|
|
The biogas station - Construction Technology Project
Fatura, Josef ; Štěrba, Martin (referee) ; Henková, Svatava (advisor)
The subject of my thesis is the technological phase biogas plant. I focused in detail on the buildings SO01 - Hala income and treatment of raw materials and SO02 - Operating building a cogeneration unit. The concreting, formwork and reinforcement substructure object SO01 I developed technological prescription. Furthermore, my work includes a technical report on the structural and technological project, construction situation, time and financial planning, study, implementation of major technological stages, construction machinery, crane assessment, project site equipment, plan for securing material resources for SO01, inspection and test plan, plan OSH and itemized budget.
|
|
|
Residential House Nové Pitkovice, building T + S - Building Technology Project
Kolář, Jan ; Ing.Václav Čech (referee) ; Henková, Svatava (advisor)
Master's thesis deals with the processing of building technology project for construction of residential house T + S in Praha Nové Pitkovice. Main focus is to develop a technical report on the project of building technology, processing technology and regulations for insulation of flat roof design and inspection test plans. Important part of the solution is the project construction site, design of the main building machines and time schedule during construction.
|
|
| |
|
|
Module of Digital Outputs with Modbus Communication
Vaško, Pavel ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
Goal of mine bachelor’s thesis is create functional module of digital outputs, which can be seen in typical industry using. This module must contain communication interface on protocol Modbus and standard communication bus RS-232, RS-485. The module must be equipped with microcontroller series x51. Size of equipment must be minimalized into the smallest proportion. One part of the thesis is focused on theoretic information about Modbus protocol. Next parts contain charakteristics of communication and software facility.
|
|
|
Reliability and availability calculation propos efor the educational laboratory
Oujezský, V. ; Novotný, B.
The basic task was to define the reliability of network equipment in the Laboratory of Transport Networks which is a part of “Sensor, Information and Communication Systems” research center (SIX). The whole educational process in the laboratory depends on the reliability of network equipment and our intention is to propose a method to define availability and reliability of used network equipment. It also serves the purpose of effective and predictable equipment renewal. This article describes mentioned method.
|
|
|
Panel meassurement device
Vaško, Pavel ; Kaczmarczyk, Václav (referee) ; Bradáč, Zdeněk (advisor)
The master thesis includes a literature search, which is focused on questions around panel measure instruments for measuring analog voltage signals. There is the block diagram and the concept of measuring voltage values designed from collected information and defined requirements to the device. In the next step a design of the circuit diagram is created and published and consequently transferred into PCB. The whole board has been fabricated, assembled and tested. The firmware development starts with the definition of basic functional blocks for using of internal elements of the device, which is followed by the implementation of the Modbus slave station service routine. The top part presents graphical user interface on the device.
|
|
| |
|
|
Software for evidention of error cases
Menšík, Tomáš ; Andrš, Ondřej (referee) ; Kovář, Jiří (advisor)
This thesis deals with the elaboration and registration of reporting failures on machinery equipment during performance of works operational maintenance support team. Software is tested in operation at Honeywell Brno. The aim of this thesis is to design software in Excel VBA development environment that can manage statistically and graphically present the results of usability machinery.
|
guest ::
