|
Corporate social responsibility of SAP
Vaníková, Zuzana ; Müllerová, Františka (advisor) ; Sitter, Barbora (referee)
The thesis deals with corporate social responsibility. The subject of investigation is the CSR strategy of the chosen company. The theoretical part describes the corporate social responsibility from a historical and a current perspective. Above all, the thesis puts emphasis on the social pillar, namely the activities of the company in relation to its stakeholders, particularly employees and volunteering. Volunteering is an important part of corporate social responsibility. The questionnaire and subsequently its statistical evaluation answers the question whether the students currently studying in two economic universities consider SAP as a responsible company and how they relate to volunteerism.
|
|
The current level of compliance with the concept of prenatal care from the perspective of pregnant women
URBÁNKOVÁ, Martina
This bachelor thesis deals with a current level of abidance of the prenatal care conception from the point of view of pregnant women. Theoretical part is divided into four main chapters. The first chapter is focused on the history of midwifery and prenatal care. The second one describes prenatal care in general, organisations, goals, antenatal preparation by the midwife, pregnancy card and a role of the midwife in the prenatal consulting. The third chapter deals with pregnancy diagnosis and the last one concerns the examination of pregnant women in each trimester. Practical part of the thesis points out a comparison of a current level of abiding the prenatal care conception in České Budějovice and Benešov region.Three goals were set prior to writting this thesis. The first goal was to find out the abidance of the prenatal care conception from the point of view of pregnant women. The second goal was to find out, whether pregnant women understand the importance of all the examinations carried out during prenatal consultings. The third goal was to find our and compare the level of abiding the prenatal care conception in České Budějovice and Benešov region. Three questions arose from these three goals: What is the level of abiding the prenatal care conception? What examinations are being carried out during prenatal consultings? What is the difference between abiding the prenatal care conception in České Budějovice and Benešov region?The qualitative method had been used to conduct the survey.Answers to the questions from the survey were searched during the acquisition and processing of the semi-structured interviews. Conclusion of the survey is, that all the pregnant women are satisfied with the current conception of the prenatal care. This way of timing of visit intervals in prenatal consultings seems right to them, important and necessary, not only for a control over themselves, but also for a control over the fetus. The level of the conception of prenatal care is good, satisfactory for all the mothers. Surprising result was, that half of the mothers is unable to describe and elaborate what examinations they went through in prenatal consulting, when it was and what was its purpose. Especially when only two respondents complained about insufficient awareness from the physician about performed examinations. As the most common examinations were stated: blood pressure, urine, weight, CTG scan and vaginal examinations. Based on the conducted survey I have managed to find out that the frequency of regular visits in prenatal consulting, according to CGOS recommendations in České Budějovice was abode only in two cases. This fact was not confirmed by any respondent from the Benešov region. Schedule of the regular visits depends on physician´s consideration. Another difference was not discovered. Current level of abidance of the prenatal care conception in Benešov region is similar to České Budějovice.The thesis may serve as an informational material in prenatal consultings in the future, especially for pregnant women, who want to know the progress of prenatal care.
|
|
The Valley's Topoclimate and Its Influence on the Vegetation
Kuželová, Hana ; Sládek, Ivan (advisor) ; Klabzuba, Jiří (referee)
The Valley's Topoclimate and Its Influence on The Vegetation Abstract The thesis as presented deals with specific valley's topoclimate of a chosen example of one particular valley located near the city Jílové u Prahy. The main objective of the thesis which has been defined is to evaluate the topoclimate of the determined area and its influence on the phytogeographical and phenological situation of the valley. The outdoor temperature measurements carried out by using Assmann's psychrometer as well as the observations of the plant's phenological state have been taken in the course of repeated expeditions into the valley in 2011 and 2012. The formations of night valley's inversions have been confirmed. The temperature gradient of 6 řC and three and half an hour long inversion following the sunrise have been recorded as a result of the measurement performed on 28th April 2012. As a consequence of the valley's parts shading the temperature differences have been proven. As a referential meteorological station the faculty's own station situated on the peak of Pecný hill and the automated personal weather station in Okrouhlo were used. The lower temperatures in the valley have a clear impact on the commencement of the plant's phenological stages. A detailed phenological scale was created in order to observe...
|
| |
|
Analysis breeding of milk cattle on the chosen biofarme
Plášková, Pavlína ; Toušová, Renata (advisor) ; Ducháček, Jaromír (referee)
The aim of this thesis is to evaluace the conditions of dairy cattle breeding in ecological agriculture and to compare them with concrete values taken from the chosen ecological farm Bílčice, which has been part of ecological agriculture since 2011 and which is focused on czech fleckvieh breeding and bio milk production. The first part deals with dairy cattle breed characteristic, main objectives and ecological agriculture principals, welfare problems, breed cattle and utility control, housing technology, nutrition and feeding, mechanical milking technology, milk production, reproduction, health condition and breeding economy. The practical part contains the rating of milk yield index (milk production, % proteins, % fat) and reproduction index ( meantime, perioda service, insemination index and after first parturition percentage). 650 pieces of cos were stabled at farm, from that 200 pices of dairy cos were mostly czech fleckvieh. Monitoring was made in 2013. Dayily milk production was around 2 750 kg. The milk utility for lactacion was in 2013 6 100 kg of milk, 3,89 % fat and 3,34 % proteins. The dairy cos were free stabled with high bedding, They were mechanically milked twice a day in herringbone parlours. Milk is being delivered once in twodays to Olma dairy. Cows are regularly driven out to pasture in summer feeding period. They are extra fed with 10 kg of clover silage and 6 kg of scarp (barely, wheat, triticale). Cows stays in stables for winter time. The ration consists of 45 kg of clover silage, 6 kg of scarp, 2 kg of lupine and 1 kg of corn in first time of lactacion. The cow utility in transitional form of economy at farm Bilcice was 7 477 kg of milk in 2010, a value in the Czech Republic was 7 726 kg of milk. After entering the ecological agriculture in 2013 milk yield at the farm decreased on 6 100 kg of milk and the average value in the Czech Republic increased to 8 370 kg of milk. The cow utility in transitional form was 4,03 % fat in 2010 and 3,89 % in 2013 (ecological agriculture). A diference between 2010 and 2013 is 0,14 %. Proteins were 3,39 % in 2010 and 3,34 % in 2013. There was average value for every reproduction index. The service period was 96 days and the meantime was 400 days, the insemination index was 1,8 and the after first parturition percentage was 54,2 %.
|
|
Lifelong Education as a Part of the Social System
Neckařová, Jana ; Šrédl, Karel (advisor) ; Hana, Hana (referee)
The diploma thesis discusses about education of adult population, while pointing out necessity of education in any age. This thesis explain importance of education of the adult population, mention forms and possible methods which are used in this type of education the most. Besides the theoretical outcome there is practical aspect included as well in form of questionnaires. Investigation in form of research was focused directly on employees, who as well as on employers whose employees attended the program. In summary both parties consider adulthood gained knowledge as a great benefit to employee as well as employer. In any case, people with higher level of education have better chances of getting a possible job than those with no or low level of education.
|
|
Arctic tundra dendrochronology
Lehejček, Jiří ; Svoboda, Miroslav (advisor) ; Monika, Monika (referee)
Historically unprecedented environmental change in the Arctic ecosystems is often given into the context of its past and possible future development. In the region where instrumental meteorological observations are scarce archives need to be investigated in order to address this issues. The comprehensive synthesis one of the archives: long-live circumpolar evergreen Juniperus communis L. shrub is presented here. 20 individuals from southwest Greenland were investigated at the cell anatomy level to understand the ecology of the species and unhide its potential for environmental and climate reconstructions. The findings are as follows:
i) Stop of exponential cross-sectional conduit-lumen widening with increasing age is in contrast with conduit-lumen nature of trees. This indicates that shrubs do not need to saturate their water and nutrient demands via traits of classical hydraulic conductivity law but rather developed different mechanisms. Extreme weather conditions result in prostrate growth form. However, different weather factors probably influence shrub growth differently: While snow and wind act mechanically (a), temperature influences the form of growth physiologically (b). a) So long as the young shrub stem has high resilience to bend back to an upright position after snow melt and so long as it can withstand the wind during the vegetation season it most likely grows upright and the conduit-lumens widen. b) Temperature, resp. freeze-thaw events are responsible for the shrubs preference of safety (finite size of conduit-lumens) over hydraulic efficiency, thus not allowing for more primary growth. All of these (and other) factors are apparently working together and the transition of vertical to more horizontal growth is gradual. As a consequence, the conduit-lumen sizes may not have to be further increased (due to ecophysiological restrictions possibly also must not) because water is no longer transported against gravity.
ii) Observed age/growth trend has to be taken into consideration for further employment of the wood anatomical parameter in paleoenvironmental studies. That is, shrub cell parameters can only be used for this purposes if correctly detrended. This allows for more accurate as well as longer reconstructions because youth trend was often neglected in reconstructions based on shrub annual-rings.
iii) The south-western Greenland Ice-Sheet (GrIS) melt rates reconstruction is presented for the whole 20th century. This part of GrIS is considered as the most active. According to the presented reconstruction current GrIS melt rates are not uncommon for the last century being comparable to first decades of 20th century. This finding is particularly important contribution to the debate on Atlantic meridional overturning circulation (AMOC). Too high fresh water inputs into the Northern Atlantic from GrIS melting may slow down or even stop the AMOC which would result in more continental climate in Europe. Presented results indicate that this threshold lies higher than observed current melt rates of GrIS.
Fascinating Juniperus comunnis species has shown to be able to address many ecological as well as environmental open questions and due to its longevity and abundant distribution has a great potential to become an important player in the Arctic research.
|
|
The Wine Market in the Czech Republic and the Politics of Wine
Vlašicová, Eliška ; Tomšík, Karel (advisor) ; Malý, Michal (referee)
The dissertation thesis is focusing on the wine market in the Czech Republic. The aim is to identify weaknesses in the wine sector in order to formulate recommendations for improving a current situation in the sector. The Common Agricultural Policy of the European Union and the Common Market Organisation for Wine was presented in the theoretical part of the thesis, where also theoretical aspects of a market including supply and demand were described, as well as an agri-food market and its specifics, wine commodity chain, determinants of demand, supply and prices of wine. In the following chapters an analysis of the wine market, especially with emphasis on the production potential of vineyards in the Czech Republic was created, and demand, supply and price of wine including a price transmission in the commodity chain of wine were modelled based on a regression analysis. The significant influence on demand of wine have had previous values of wine consumption and wine prices, substitutes consumptions (prices of substitutes were not a significant factors), household income and salary, a quality of the wine and awards in international competitions. Significant factors of the side of supply including the price of wine grapes, the price of wine, vineyard area, production of wine grapes, some aspects of weather and certain subsidies. A climate change, which is in progress, may result to the expansion of viticulture and winemaking in the Czech Republic and also to a change of varieties in vineyards. Demand has in the commodity chain of wine greater impact than the supply. It can have a negative effect on growers or winemakers. Planting of vines is not sufficient to maintain current levels of a production potential of vineyards in the Czech Republic. The ideal amount of annual planting vines should be about 655 ha. A related issue is financing a vineyards renewal, which is costly. Based on a financial analysis of small and medium-sized wine companies, it was found that these businesses cannot afford the renewal of vineyards from its own resources and will require grant assistance of the state, eventually EU.
|
|
Freezing technology of bull sperm in relation to its survivability and fertilization ability
Doležalová, Martina ; Stádník, Luděk (advisor) ; Jiří, Jiří (referee)
The aim of optimalization the insemination doses production is to provide the highest fertilization ability of spermatozoa during the demanding proces of processing fresh semen and its subsequent cryopreservation. Temperature changes causes spermatozoa damage during the cooling and freezing. Spermatozoa is exposed to cold shock and many others limiting factors, which leads to cell death and therefore to decline of fertilization ability of thawed insemination doses. For increasing spermatozoa resistance, exactly the plasma membrane resistance against cold shock was fraction of egg yolk LDL cholesterol (low density lipoprotein) at various concentrations into the comercially produced diluents added. It is believed that LDL acts possitively to plasma membrane and helps to maintain the fertilization ability of spermatozoa after thawing. Following step in the proces of insemination doses production is slow cooling of diluted semen and equilibration, when the straws are store at cooling box for 30 minutes to 240 hours. This period is necessary to penetrate of certain diluent components into the spermatazoa also maintain the balance between their intracellular and extracellular concentration. Also important is subsequent freezing temperature gradient of insemination doses. The most suitable freezing method is based on computer controlled temperature decline in freezing chamber which allows the precise control of ice crystals formation that could tear and kill the cell.
During 2012 to 2016 was repeatedly collected semen from the group of breeding bulls (n = 27, Holstein and Czech Fleckvieh breed) at AI centre. Semen which fulfill the standard entrance conditions in first step was evenly into several parts divided. For dilution the three types of comercially diluents AndroMed, Bioxcell and Triladyl with and without LDL addition were used. Into the diluents AndroMed and Bioxcell the concentration of LDL 4 %, 6 % and 8% into the dilent Triladyl 6 %, 8 % and 10 % was added. Diluted semen was filled into the glass capillares with volume 0,1 ml and temperature +4 °C. Subsequently the sample was placed to cold bath (0°C) for 10 minutes. Then the volume of capillare with physiological solution (37 °C) was mixed and for next 120 minutes was incubate. The effect of cold shock to proportion of live spermatozoa was evaluated by using Eosin and Nigrosine staining technique during heat test of spermatozoa survivability after spermatozoa heating and after 120 minutes of incubation.
The more suitable semen diluents which provide the higher spermatozoa resistance against cold shock were AndroMed and Bioxcell. Together the possitive effect of LDL addition into the diluents to lower decrease of proportion of live spermatozoa during heat test was found (P<0.05). The most suitable LDL concentration which had a favorable influence at spermatozoa resistance against cold shock was 6 % in diluent Bioxcell. Values of the proportion of live sperm were higher at the beginning of the heat test (+1.31% to + 3.2%) and after 120 minute incubation (+5.82% to +8.41%) compared to other diluents with and without addition of LDL.
In the next step the process of equilibration was optimized, is an important part of insemination doses production. The effect of the length of equilibration for subsequent fertilization ability of spermatozoa was evaluated using spermatozoa motility based of CASA and proportion of live spermatozoa after thawing and during heat survival test lasting 120 minutes (37 ° C). Suitable semen was diluted by comercially used diluent AndroMed based on soya lecithin, filled into the straws (0.25 ml), cooled and equilibrated in cooling box for 30, 120 and 240 minutes and freezed in programmable freezing box applying four types of freezing curves differing in temperature rate decline. There was used standard and by producer recommended 3. phase freezing curve, then 2. phase freezing curve, and 3. phase freezing curve with slower as well as rapid decline of temperature rate in freezing chamber, compared with standard freezing curve. The highest spermatozoa motility was found using 240 minutes of equilibration by +2.72% and +4.58% compared to other lengths of equilibration (P <0.05 to 0.01). The highest proportion of live spermatozoa was found using 120 minutes of equilibration (+6.87 % and +8.68 %). The highest average spermatozoa motility during heat test after thawing was achieved by using 2. phase freezing curve (from +2.97% to +10.37%, P <0.05), also in the proportion of live spermatozoa (from + 4.37% to +8.82%, P <0.01). When evaluating interaction between the length of equilibration and freezing curve (standard 3. phase and 2 . phase freezing curve), the highest average spermatozoa motility and proportion of live spermatozoa using 240 minutes of equilibration by both freezing curves was reached, there was no statistically significant differences. As well as, in all evaluated parts of this study the individual differences between ejaculate of bulls and within semen from one bull (P <0.05) as secondary effect were found.
To maintain good fertilization ability of semen during cryopreservation is necessary to increase the spermatozoa resistance against cold shock using addition of correct concentration of LDL into the commercially used diluents AndroMed and Bioxcell. Subsequently the fertilization ability of insemination dose is influenced by cooling, the length of equilibration and freezing. The length of equilibration 120 minutes and more as well as gentle way of freezing according to freezing curve, which ensures a gradual decrease of temperature in freezing chamber provided the higher average spermatozoa motility and proportion of live spermatozoa.
|
|
A pair of phase-synchronized semiconductor lasers for length metrology
Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Řeřucha, Šimon ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
Semiconductor lasers are increasingly widespread in areas that have been so far dominated by He-Ne lasers. One of such areas is the length metrology, where He-Ne laser operating at 633nm wavelength is still a traditional source of coherent light for laser interferometers distance measuring. The advantages of semiconductor lasers compared with He-Ne laser are greater optical power and a significantly wider range of wavelength tuning without mode jumps. Another advantage is the possibility of frequency modulation of wavelength of the laser diode by directly changing the injection current. The benefits predetermine these laser diodes for the realization of dual-frequency laser sources for heterodyne interferometry. In this case, using a phase-locked loop technique the optical frequency of a laser diode is locked to the optical frequency of another laser diode with a certain frequency offset in the MHz order. In our contribution we present utilization of DBR laser diodes in implementing a dual-frequency laser source for laser interferometry with heterodyne detection.\n
|
guest ::
