|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
| |
|
Relationship between petrographic parameters and technological properties of clastic sedimentary rocks used for crushed stone
Čermák, Martin ; Přikryl, Richard (advisor) ; Krutilová, Kateřina (referee)
This diploma thesis is focused on the finding and describing of the relationships between petrological parameters and technological properties of rocks used for the production of aggregates (crushed stone). Rock specimens were selected from a geological area of Culm (Lower Carboniferous age) in the area of Nízký Jeseník Mts. and Drahanská vrchovina uplands in the Czech Republic. Studied localities were selected on the basis of the current quarrying operations and also to represent the different strata. The six studied localities encompass Kobylí, Chabičov, and Bělkovice where Horní Benešov formation of Nízký Jeseník is exposed. Locality Valšov represents Andělské Hory formation and locality Nová Ves and Loštice represent Protivanov formation of Drahanská vrchovina uplands. Two specimens were taken from the locality Loštice (one from the second cut because there are produced low-grade aggregates and the third cut where high quality crushed stone is produced). A detailed mineralogical-petrographic examination of the samples was the first step, in an attempt to obtain their mineralogical composition and to identify the major rock-forming clasts. Thin sections were examined by standard polarizing microscopy. The auxiliary UV lamp and thin sections saturated by fluorescent substance were used for the...
|
|
Cultural Centres
Adolfová, Barbora ; PROKOP, Petr (advisor) ; KAŠPAR, David (referee)
This thesis is concentrated on cultural centres built between years 1960 and 1990 in the former socialist Czechoslovakia. Six cultural centres have been chosen and analyzed to conclude the purposes they serve as well as the programs they offer. These chosen cultural centres are run as municipal organisations financed from the town budgets. The six towns where they are located are similar to each other in terms of their history, size and the time when their cultural centres were built. All of these centres share difficulties with the lack of cultural interest of local citizens, bad technical shape of the buildings in question and low budget.
The aim of this thesis is to compare the functioning of these six cultural centres and conclude whether being directly funded and influenced by the municipal councils has a positive impact and should serve as a model for cultural centres or should be replaced by a different one. It also focuses on cooperation between the management of cultural centres and municipal officials, cooperation with other local cultural institutions and cultural centres from different towns.
|
|
Mechanochemical Preparation of Alumina-Ceria
Jirátová, Květa ; Spojakina, A. ; Tyuliev, G. ; Balabánová, Jana ; Kaluža, Luděk ; Palcheva, R.
Ceria containing catalysts play an essential role in heterogeneous catalytic processes. However, ceria shows poor thermal stability and low specific surface area and therefore, many studies have been done to improve its properties by combination with other oxides. Alumina-ceria is substantial component of the three ways catalysts, due to the ceria ability to function as the buffer of oxygen and to enhance the oxygen storage capacity of the catalysts. Ceria in these catalysts also functions as structural promoting component, increasing alumina stability towards thermal sintering. Promising method of oxides preparation, very interesting and simple but not sufficiently studied yet is a mechanochemical synthesis. Here we report on the synthesis of nano-sized alumina, ceria and ceria-alumina of various compositions by a wet solid phase mechanochemical reaction of hydrous aluminum, and/or cerium nitrate with ammonium bicarbonate after addition of a small amount of water. The aim of this contribution is to study processes being in progress during synthesis of the mixed oxides, interaction between components and their mutual effect on the properties of resulting products. The phase evolution during mechanical milling and the subsequent heat treatment of precursors were studied by X-ray diffraction, DTA/TG, H2-TPR, NH3-TPD, CO2-TPD, N2 adsorption at -195°C, IR, and XPS spectroscopy. Alumina and mixtures of alumina with different quantities of CeO2 (1- 18 wt. %) were synthesized by mechanochemical method from aluminum nitrate, cerium nitrate and ammonia bicarbonate.
Fulltext: content.csg -  PDF
Plný tet: SKMBT_C22015083108560 - PDF
|
|
Fluorescent analysis of the differential protein expression in normozoospermic and asthenozoospermic sperm samples
Děd, Lukáš ; Čapková, Jana ; Kubátová, Alena ; Teplá, O. ; Pěknicová, Jana
Asthenozoospermia is one of the main seminal pathologies underlying male infertility. Previous proteomic studies have demonstrated the significant differences in the protein profiles between normozoospermic and asthenozoospermic sperm samples. Since these studies were primarily focused on the identification of differentially expressed proteins by mass spectrometry, we aimed to evaluate the ability of our diagnostic antibodies to detect the differential expression of selected protein markers by fluorescent microscopy and flow cytometry techniques. Therefore, we analyzed sperm samples from 30 men with normal and 30 men with astheno spermiograms, average by the panel of our diagnostic anti-human sperm (Hs) antibodies. Fluorescent microscopy and flow cytometry analysis revealed quantitative differences in the protein abundances between normo and astheno sperm samples, namely, in GAPDHs, evaluated with Hs-8 MoAb, VCP, evaluated with Hs-14 MoAb, and ATP synthase, evaluated with MoAb Hs-36. From the methodological point of view, we observed very high correlation between the data obtained by fluorescent microscopy and flow cytometry techniques and therefore both methods are useful for evaluation of protein differences associated with asthenozoospermia. From the clinical point of view, we observed the strong association of the low sperm motility in the sample with the expression of proteins, playing an important role in sperm energy metabolism (expected), but also with the expression of all tested intra-acrosomal proteins. These findings further demonstrate asthenozoospermia as a complex semen disorder frequently associated with other semen pathologies, which are not diagnosed by basic semen analysis, and the possibility to use monoclonal antibodies as a tool for diagnosis of protein associated sperm pathologies in the semen with the low sperm motility.
|
|
How to prevent the proliferation of Legionella pneumophylis in hot water in the hospital Czech Krumlov
TUREK, Jan
This diploma thesis deals with microbiological quality of hot water in a hospital in Cesky Krumlov as well as hot water piping condition with respect to Legionella. It also deals with arrangements for improving the quality of hot water in this hospital. The subject and target of this thesis are the findings of the mentioned parameters based on own observations, technical documentation and analysis of warm water performed by an accredited laboratory. The hospital in Cesky Krumlov, the construction of which began in 1909, was built in 1911 as the 'Nemocnice Císaře Františka Josefa I.' As the time went by, new buildings were built up. The hospital was renamed to 'Všeobecná veřejná nemocnice' in 1942. In the following years the hospital expanded until the current condition. Water quality and presence of Legionella is a world-wide issue, which we must fight against. The thesis is divided into two parts. First, theoretical part, which includes both general and specific knowledge about Legionella, its health risks, the environment in which it occurs, possibilities of eliminating, suitability of the material for hot water pipes, gained in professional literature and a part of the Czech legislation dealing with public health protection, the law 'No. 258/2004 Coll.' in actual version and quality of drinking water and hot water. In the second, empirical part, I focus on the situation of the hospital in Cesky Krumlov from 2009 till 2015, concerning newly built boiler room and the whole distribution system of hot water regarding Legionella. Particularly I focused on materials used for ecologisation of the gas boiler room and materials used for hot water pipes and actual state of water distribution in individual buildings of this health care facility. I mentioned the analysis of the water samples performed by an accredited laboratory with corresponding technical documentation, which concerns the water distribution system, provided by the medical facility. I used secondary data analysis to evaluate these documents. Regarding the results from 2009 to 2015 the microbiological quality of warm water doesn't meet the limits defined in the Attachment No. 3 of the above mentioned law Order 252/2004 Coll. Limit value for colony forming units of Legionella is set to maximum of 100 CFU. In most of the samples this limit was exceeded by series of units up to hundred thousands of units. The last results in 2015 prove improvement of the unfavorable situation. In that year the analysis was tested three times. First in February, where the CFU units were 'only' in hundreds, with the top value of 550 CFU in the Postacute Care ward. Second analysis was performed in June that same year. Results were acceptable. The highest value was 64 CFU. Last analysis in the hospital was performed in December. Increased concentration of Legionella was again in the Surgery building. There were established of 1400 colony forming units. There were 300 CFU in the Postacute Care ward and the limit value of 100 CFU was in the ward of Internal medicine. The answers to research questions 'How to prevent reproduction of Legionella peumophylis in the water distribution system of the hospital in Cesky Krumlov?' and 'How to ensure a sufficient amount of quality hot water in the medical facility?' are included at the end of the stated recommendations. A risk factor causing the fast reproduction of Legionella is the old water distribution system in most of the buildings and low water temperature of water leaving the boiler, which is 55°C. All mentioned results and evaluations are included in this thesis as well as attached pictures, which show the environment and situation within the Health Care Institutions.
|
| |
|
Cold tolerance of terrestrial isopod
SOUČKOVÁ, Kateřina
The woodlice, Porcellio scaber (Latreille, 1804), is a terrestrial isopod. Its metabolic reserves and body size are important factors affecting the fitness attributes, such as survival at unfavourable conditions. The larger and heavier individuals did not survive longer than smaller individuals. Amount of glycogen and body weight (fresh and dry) appeared to be an inapplicable parameter in the observed differences among individuals during survival at low temperature. We compared three treatments (long day, short day, natural autumn conditions) of Porcellio scaber and found differences in amount of energy reserves and cryoprotectants.
|
|
Use of anti-stress agents to minimize the consequences of stressors on the production of Horticultural Crops
Nosálková, Monika ; Hnilička, František (advisor) ; Dana, Dana (referee)
The objective of the thesis is to research the physiological differences between picked genotypes of Capsicum annuum and the effect of lower temperatures in the beginning of ontogeny. Another objective is to find out how Capsicum annuum plants react to application of anti-stress agent Atonic and to determine the most appropriate physiological indicators of resistence to low temperatures.
Capsicum annuum ranks among thermophilic crops for which the temperature optimum is of 22 - 25 °C during the day and 18 - 20 °C overnight. They are planted at the field station at the time when ground frost may occur. These can cause physiological changes in the plant or even cause her death.
Three varieties were chosen for the experiment: Amy, Eva a Lydia. Plants were divided into a control group and treatment group. Both groups were further divided into two additional groups - with and without the application of Atonic in the beginning of vegetative growth (6th day of exposure to stress). Control group plants were grown at 20 °C and stressed plants were moved into a klimabox with temperature of 5 °C throughout the entire day. Such temperature may occur after planting the plants into an outdoor habitat.
Proline content in leaves of Capsicum annuum and relative discharge of electrolyte was studied in two - day intervals. From the obtained results it can be concluded that the accumulation of proline was the highest for Lydia variety in a stressed scenario with the application of Atonic and the lowest proline content was found in in the Amy variety in a control group. Furthermore, it was discovered that the ontogeny of plants has an effect on the accumulation of proline and relative discharge of electrolyte from the beginning of the measurement. The absolute highest electrolyte discharge was measured in the Lydia variety in a stressed scenario and the lowest one was present in the Amy variety in a control group. These results confirm the hypothesis.
|
guest ::
