|
|
Physics Simulation for Pinball Game
Čermák, Jakub ; Polok, Lukáš (referee) ; Zachariáš, Michal (advisor)
The objective of this work is to create a library for physical simulation and using the library to create a game of pinball, on which you can test functionality of the library. Problems that appeared during the creation of the library, are described in this paper along with their solutions. In particular, tunneling, detection and results of collisions. Subsequent optimization solutions to these problems for our specific library. Of no smaller importance are principles which reduce the requirements of the final simulation. Among the most important ones are the correct choice of limits, detection of rolling and sleep of slowly moving dynamic objects.
|
|
|
Návrh automatizovaného systému pro zavlažování zahrady
Vaněk, Jakub
This work introduces the issue of automatic irrigation. It also provides a brief overview of currently offered commercial solutions and a description of their advantages and disadvantages. The main part of the thesis describes the design and procedure for the realization of the own irrigation system, a detailed introduction to the finished system, the course of its testing in laboratory conditions and, finally, its comparison with commercially available competition.
|
|
|
Tvorba mobilnej aplikácie pre koncept Time under tension
Moric, Marek
The essence of this work is to design and implement an application that allows users to set the type and target of a timer. The various types of activities and timer outcomes are fully under the user's control. The research of the work is focused on concepts and technologies that appear in the work. The methodology deals with the requirements and design phases that the implementation part of the work has gone through.
|
|
|
Timer For Rc Models
Fišer, Ondřej
This paper describes complete design of timer for RC models. Described timer has three PWM outputs. With these outputs it is possible to connect two independent servo-motors and engine controller. The whole is controlled by 8-bit microprocessor. The time records are stored in external EEPROM, that can be programmed by using I2C bus. Paper further discus design of programming, which can be easily programmed the memory of EEPROM by the PC or smartphone. The goal of this paper is to design and build high quality RC timer with accessories.
|
|
|
Timer For RC Models
Fišer, Ondřej ; Pospíšil, Martin (referee) ; Šebesta, Jiří (advisor)
This paper describes complete design of timer for RC models. Described timer has three PWM outputs. With these outputs it is possible to connect two independent servo-motors and engine controller. 1 signal. The whole is controlled by 8-bit microprocessor. The time records are stored in external EEPROM, that can be programmed using I2C. Paper further discuss design of programming, which can be easily programmed the memory of EEPROM by the PC or smartphone. The goal of this paper is to design and build high quality RC timer with accessories.
|
|
|
Detector of bubbles in blood
Foltýn, Vojtěch ; Sekora, Jiří (referee) ; Rozman, Jiří (advisor)
ABSTRAKT This thesis is the theoretical part deals with various ways of cleansing the blood, with a focus on hem dialysis. Describes the technical solution and monitor the dialysis flow diagram of blood and dialysate. The paper describes various solutions to detect bubbles in the blood and their advantages and disadvantages. Based on the best method of detection are designed detector bubbles. Working in the practical part contains a proposal detector set for venous diameter of 20 mm. Equipment to detect bubbles allows for connection to a blood pump discontinue its activities. Output works are drawing diagrams, printed circuit board design and implementation of graphs circuits.
|
|
|
RISC-V Model Creation
Nosterský, Milan ; Zachariášová, Marcela (referee) ; Hruška, Tomáš (advisor)
This bachelor thesis deals with the implementations of RISC-V processor model in the language for architecture description CodAL. The theoretical part of thesis is focused on the description of CodAL language and classification of processors. The practical part of thesis deals with the implementation of processor RISC-V on instruction accurate level and the model testing. The thesis also deals with the implementation of MMU, timer and analysis of the proxy kernel.
|
|
|
Wireless sports timer
Gál, Marek ; Horák, Karel (referee) ; Petyovský, Petr (advisor)
This work deals with design and realization of universal sport timer and uses wireless communication between individual components. The purposes is to achieve maximum mobility, reliability and simplicity for users. This work doesn‘t deal with sensing elements of measuring system, it only provides examples of their typical usage. The content of this proposal is the primary unit, which will ensure time measurement with 0,01s resolution and the secondary unit, which will track a sensing elements and provide information for processing to primary unit. The design comprises communication method, hardware of all devices and firmware.
|
|
|
Light Weight Mesh Experiments
Nováček, Richard ; Botta, Miroslav (referee) ; Šimek, Milan (advisor)
Semestral thesis deals new technology Lightweight Mesh and its implementation on a laboratory task to the subject of wireless sensor networks and the creation of appropriate documentation, which will serve as a basis to students. Also included is the use of serial communication, timer and ADC in Atmel Studio.
|
|
|
Device for measuring of the reaction time
Bohuš, Michal ; Kolářová, Jana (referee) ; Balogh, Jaroslav (advisor)
The aim of this bachelor thesis was become acquainted with human reaction time,its measurements and use. Part of the project was to build a device that measures reaction time of audio-visual stimulus. The device consists of stimulating and controlling parts. Audio-visual stimuli are scanned and controlled by microcontroler ATmega 16. Based on the obtained reaction time evaluate reaction time of measured entity.
|
guest ::
