|
|
Family house
Diatel, Bohumil ; Beranová, Iveta (referee) ; Matějka, Libor (advisor)
Topic of this bachelor thesis is project of family house in Bojkovice on Pitínská street. House is designed for four members family. The building has ground floor, first floor and basement with inbuilt garage and terrace. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal constructions are also designed according to Porotherm system. Roof construction of the object is composed by two flat roofs. The object is settled into slightly sloping terrain. Drawings were worked out in software AutoCAD. The part of the project is a thermal technical analysis, acoustic and fire safety review.
|
|
|
Hotel
Belatka, Martin ; Bartolšicová, Eva (referee) ; Matějka, Libor (advisor)
This diploma thesis solves a hotel in Třebíč, street Svabinského. The hotel is designed as four-storey, building with a basement, with warm flat roof over the fourth floor and terrace on the fourth floor. The hotel has 20 rooms with a total capacity of 44 persons. In the hotel is a restaurant for guests hotel. External walls in basement are made of concrete blocks. External walls in above-ground floors are made of brick blocks Heluz with external thermal insulation. Plot is planar. Part of the design is thermal assessment, accustic assessment and fire safery assessment.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Storage area with administrative building
Šesták, Tomáš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.
|
|
|
Guest House
Jančo, Ivan ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The objective of the master´s thesis is design of the building in the Valtice city. The building is designed as single-detached dwelling. On the first floor are located wine cellar, sanitary facilities for guests and the staff, common areas and guest accommodation facilities. The second and third floor are designed for guest accommodation facilities and for a need of the staff. The wine cellar and one room unit are designed as a wheelchair accessible. External walls are made of Heluz Family 44 brickwork. Ceiling structure is made of reinforced concrete slabs. The supporting system is made of Porotherm 25 / 25 AKU SYM. The building is three-level house with flat roof and partly basement.
|
|
|
Family house
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor´s thesis solve design of the Family house in city Telč. It is a two-storey house with a partial basement, the roof is pitched with a slope of 35°. The house is designed of brick POROTHERM. The building is set on a land slightly sloping. The object is designed by valid standard.
|
|
|
Residential House
Aberl, Tomáš ; Svatoňová, Hana (referee) ; Mohelníková, Jitka (advisor)
It is about new- built family house, which is standing alone on edge of the village Troubsko u Brna. The building´s height and architecturally are designed to fulfill requirements of surrounding buildings. The building has a basement smaller than the house itself and it has residential attic. The basement serves as a garage for two cars. The rest of the house is conceived as a single-family house, for one family of for people (two parents, two kids). Construction system is made by brick block of Porotherm, including the ceiling construction. The house has a gable roof which is designed as a roof without purlin system. As covering of the roof serves roof clay tiles.
|
|
| |
|
|
Newly-Built Detached House with Dental Surgeries in Brno-Žebětín
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building of a family house with dental surgeries in Brno – Žebětín, as well as elaboration of project documentation for realization of building construction. The building is designed for mixed use - there is stomatological surgeries available to the public in the 1st floor, and on the 2nd floor there is the owner's and his family's apartment. Both sections are separated from each other, including separate entrances to the building. The building will be located on the edge of the northern part of Brno - Žebětín. The location is slightly developed by family houses. The architectonical solution is designed with consideration of the building location and the character of the surrounding housing development. The part for living in the family house is designed for a family with three to four members. The house is detached, it is situated in a flat terrain and is designed as a partially basement. The designed building has two above-ground storeys and a basement, which has a garage for parking two cars and a technical facility of the building. Entrance to the garage is from the side of the building. The main entrances to the building are accessible from the adjacent outer curved staircase, copying the arched shape of the 1st storey facade. The section with dental surgeries on the 1st floor is designed as wheelchair accessible - for handicapped patients with limited mobility. The white solution of the facade of the house alternates with the use of a gray stone facing. The roof of the family house is designed as a single-layer flat roof.
|
|
|
Energy efficient terraced house
Král, Jakub ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of my diploma thesis is a design of a new energy efficient terraced house in the gap site. Building has two dwelling unit of category 4+kitchenette and 6+ kitchenette. Building has a cellar, two floors and an attic. The cellar structures and horizontal structures are made of reinforced concrete. Sand-lime bricks are used for masonry. The building is covered with gabled roof with timber roof truss. In this building there are used rainwater and renewable energy in a form of electrical energy made by photovoltaic panels.
|
guest ::
