|
| |
|
|
Design and lay-out of high pressure pumping station.
Václavík, Tomáš ; Franc, Zdeněk (referee) ; Habán, Vladimír (advisor)
The aim of diploma thesis is design and lay-out of high pressure pumping station with plunger pumps for splash of scales from slabs of hot-rolled. Theoretic (introduction) part of this thesis contain description of formation of scales and description of ways how it is possible remove these scales. And this part contains also explication of effect of water jet on solid material. The practical part of diploma thesis is focused on design of pumping station including of dimensioning of machinery. Part of this work is also technical documentation for proposed pumping station and specification of main machines and devices.
|
|
|
Assemblying effect on cable lines quality
Dočkal, Martin ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
In the first part is explained what actually a structured cabling is. Its beginning, from what and why it was created. Its history when at the beginning were applied unbalanced coaxial cables, those were later replaced by balanced cables. In cabling for TVs are still used coaxial cables. Balanced cables are according to type named UTP, STP, FTP, and so on. Whit growing popularity of this type of cabling and its wide spread application was necessary to set some rules, standards, specifications and demands, how to build up the cabling from project to realization. According to these rules is the system built so there are strict rules for length of subsystems and interfaces and the whole appearance of the structure cabling. Next important point is projecting of cabling that is related to the previous points and when it’s finished, we should strictly follow it. With the project is closely connected characteristic of this cabling as attenuations, cross-talks and other transmission parameters which are measured in the practical part. In the second part is spoken about all the parts of which the structured cabling consists - metallic and optical connecting elements and cables. There are also mentioned their mechanical, electrical and transmission features. In the third part is described influence of man on the quality of structured cabling and the most common causes of lower quality and the ways how to prevent this from happening and how to manipulate with cabling not to destroy it. The final (fourth) part considers the measurement. There are measured qualities of metallic wires as the attenuations, delay, cross-talks on the near- and far-end, impedance and resistance. To all the features are mentioned schemes of the measurement on the twisted pairs. The measurement is divided into two parts. In the first part are measured five types of balanced cables of different length, category and damage influencing quality of these cables. In the second part is measured one balanced cable if it’s corresponding with category 5 for that t was made and if it would be possible to use it also for higher category 6. Values are tabularly sorted in tables.
|
|
|
Residential house Jihlava-technological phase of construction site
Novák, Jan ; Mesiarkin, Jan (referee) ; Henková, Svatava (advisor)
The subject of my bachelor´s thesis is to implement the rough upper construction of residential house in Jihlava. Processing Technology in detail the rules for building and assembly of prefabricated panels SPIROLL. It also contains a technical report, technical report building equipment, building equipment, mechanical assembly design, safety and environmental protection, inspection and test plan, schedule, itemized budget and the export ceiling panels SPIROLL.
|
|
|
Implementation of HTML5 and CSS3
Míka, Jan ; Vondra, Zdeněk (advisor) ; Machek, Ondřej (referee)
This bachelor thesis is focused on testing and analysing HTML5 and CSS3. These programming languages are two most common languages for webdesign and webdeveloping. Theory part of this thesis introduces topic about the historical and current language specification. This part also explains role of CSS3 in conjuction with HTML5. In the main part, author defines common problems in coding, which are used for questionnaire research after that. The questionnaire itself is then created in the practical part. Questionnaire will be used for hypothes testing of statistic influence of defined measures. After that, ten elements will be chosen, which will be analysed and tested. At the end, the author measures advantages and disadvantage in using specific elements of these specifications.
|
|
|
Main causes of change requirements during web-based projects
Nagy, Jan ; Chocholatý, Drahomír (advisor) ; Kružík, Martin (referee)
This thesis deals with identification and analysis of causes of change requirements during web-based projects. The theoretical part of the thesis concentrates on an analysis of web-based project's specifics. In the following practical part of the thesis all of the identified causes of change requirements were aggregated together. Internet survey was performed with purpose to confirm identified causes in a literature and to enlarge the list of the caus-es. Every cause is described, analyzed and evaluated according to its criticality. Causal causes are determined by using convenient methods. In last chapter, a set of recommenda-tions for web developers (suppliers) are suggested based on the facts known from previous parts of the thesis. It is a list of best-practices for lowering a risk of change requirements occurrence and for minimalizing their impact on a project and also on social relationships between suppliers and customers. An existing literature generally considers change requirements just as one of many reasons of project's failure, however it does not focus satisfactorily on a research of their causes. Significance of the thesis is therefore based on its focusing on one specific area. The thesis provides a systematic summary of information, which serves for web project suppliers as an inspiration for an implementation intern process of specifying new project.
|
|
| |
|
|
Software requirements in banking
Janoušková, Irena ; Pavlíčková, Jarmila (advisor) ; Maryška, Miloš (referee)
This diploma thesis deals with the areas of requirements management in large organizations, especially banks. Bank projects have their own characteristics, as well as the banking environment as such. The paper will analyze the problem of requirements management in general and during description of best practices and methodological procedures attention will be drawn to the peculiar characteristics of the banking environment. This thesis focuses mainly on methodological and personal aspects of requirements management - the role of the analyst and the requirements management methodology. One of the main goals is selection of requiremets management methodology suitable for use in banks. Other important objectives are the description of best practices and mapping of the description of requirements management in the most widely used software development methodologies. The paper can serve as a textbook for junior analysts and other team members, or as a reference guide. Well-educated analyst and knowledgeable project team members enhance probability of a successful completion of the project and objectives achievement within set deadlines, budget and to everyone's satisfaction.
|
|
|
A Chinese patient in the Czech health care service
SCHOLZ, Pavel
The name of this thesis is: "A Chinese patient in the Czech health care service". China with approximately 1.3 million inhabitants belongs to the largest countries in the world. Migration and tourism of inhabitants of the Folk Republic of China and Republic of China towards the Central European region, is higher year by year. Simultaneously, with increasing accumulation of the Chinese minority group members in the Czech Republic, even the number of provided health care for this minority group of inhabitants is rising. Different conception of health and disease markedly affects the approach and understanding of the patient/client from another culture both from professional point of view and from the view of patient/client. Medical personnel should be aware of main differences in behaviour of the members of minority group and their population, and not only in connection with provided health care. This research work is worked out by means of qualitative research methods. Working out of nursing care peculiarities which the members of Chinese minority want to respect was the research goal of this thesis. Collection of data was carried out by means of a half-structured interview in members of the Chinese minority group in the Czech Republic. The content of questions of the half-structured interview is based notably on conceptual, nursing models developed by Gordonová, M., Leiningerová, M., and a model developed by Gigerová, J. {--} Davidhizerová, R. The five research questions were specified for the goal accomplishment. The results of research were treated by means of casuistics and a slightly modified approach of general analysis by Ritchie and Spencer. Established nursing care peculiarities in the area of blood taking, and information of physician´s diagnosis, especially towards the family, and apprehension of medicament addiction, and even the pain and answer to it belong to leading results. Description of how the members of Chinese minority group understand the Czech nursing and a nurse as a provider of professional nursing care also belongs to other results. The hypotheses decided on further research use were suggested on the basis of results of this thesis. This thesis and its results are determined to the professional health care purposes and for direct provision of nursing care in health service facilities in the Czech Republic. One of the outcomes of this thesis is also a propsal of the nursing care standard in members of Chinese minority group living in the Czech Republic, and, hereafter, an information summary book for nurses concerning trans-cultural specificity of the Chinese patient/client in the Czech health services.
|
|
|
Specifika obchodování se skandinávskými státy - důraz na interkulturní komunikaci
Nová, Klára ; Machková, Hana (advisor) ; Štěrbová, Ludmila (referee)
Obsahem této bakalářské práce je tematika interkulturní komunikace a vliv interkulturních rozdílů na spolupráci a obchodování se skandinávskými státy (Norsko, Švédsko, Dánsko). Na základě historických, kulturních, politických a ekonomických faktorů jsou v práci vysvětleny specifika a projevy kulturních dimenzí skandinávských států definované G. Hofstedem a jejich vliv na spolupráci a obchodování s těmito státy. Na závěr jsou uvedena doporučení a rady pro české obchodníky a manažery, kteří se chystají na spolupráci se skandinávskými zeměmi.
|
guest ::
