|
Analysis of Trench Insulated Gate Bipolar Transistors
Karlovský, Juraj ; Polčák, Josef (referee) ; Bábor, Petr (advisor)
This thesis is focused on the selection and optimalization of suitable analytical methods for study of TIGBT (Trench Insulated Gate Bipolar Transistor) structures with a use of methods, that depict material composition of the studied sample. The theoretical part contain explana-tions of the analytical methods used for measurements and basic principle of operation of an TIGBT transistor. The practical part contain the methodic of measurements and the evaluation of the obtained data and design of optimal procedures in done experiments.
|
|
Switched power source for electroplating
Janků, Roman ; Minárik, Vladimír (referee) ; Červinka, Dalibor (advisor)
The thesis deals with the switching source for electroplating. The theoretical principles of galvanizing, the optimal technological process and a list of most commonly used metals are described. There is also a list of well-known producers, and a description of their resources for electroplating, which have the same output parameters. In the second part of the work there is an introduction of the already-completed school source 2000A/20V, major technical imperfections is solved there. There is also proposition of technical layout made in 3D AutoCAD. Finally, there is an economic analysis of the production costs of the source and a research in suitable suppliers of components and materials. The thesis contains an estimate of the selling and total price compared with competition.
|
|
Basic measurement of bipolar and unipolar transistor
Kaňa, Leoš ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
In terms of the better effectiveness in the sphere of transistor characteristics measuring, no matter unipolar (FET) or bipolar (BJT), in laboratory conditions and their better understanding in terms of thrash out a subject matter is desirable have to available workplace let us say preparation enabling this kind of measuring with modifiability wiring and with possibility to change measured component. This thesis isn‘t focused only on development of this kind of universal component for measuring but simultaneously contains brief summary about the theory and parameters of transistors. Next aim is the development and realisation of static characteristic measuring program in VEE 8.0 Pro environment. Finally the complex laboratory exercise has to be done for measuring of bipolar and unipolar transistor’s static characteristics include programs for automatic measuring. For developing of DPS was used developing system named Eagle which gives us instrument with sufficiently accuracy. In thesis is contained theory needed for measuring and programming. Except possibility of measured component change we can change transistor connection in circuit on the board. This change is available for BJT (CE, CB, CC) and unipolar JFET (CS, CG, CD) transistor’s.
|
|
Acoustic emissions of buildings
Smažinka, Josef ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
The diploma thesis deals with acoustics with the main focus on acoustic emissions of buildings. The first part of the thesis aims to familiarize the reader with the field of acoustics as a whole. They will learn the basic concepts, quantities and relations that exist in acoustics. In the second part I focus specifically on the sources of noise in buildings and their surroundings, how can excessive noise affect health, what standards must be met and how to prevent excessive noise. The last part is devoted to practical measurements in the field, which is focused on real sources of noise in the city of Brno. The aim of this measurement is to compare the noise generated by buildings with other noises in the urban environment.
|
| |
|
Batteries for medical applications
Pagáčová, Lenka ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
This master’s thesis deals with the influence of different carbon materials on the properties of Li-S accumulators. The theoretical part of the thesis describes primary and secondary electrochemical sources with a focus on medical applications. The second chapter deals individually with a lithium article. The main part of the thesis is the practical production of electrodes for Li-S accumulators using different types of carbon materials. The effects of these materials on the properties of accumulators are investigated to determine the most appropriate in terms of capacity and stability.
|
|
Battery supplied lawn mower
Picmaus, Jan ; Martiš, Jan (referee) ; Vorel, Pavel (advisor)
The thesis deals with a concept of turning a conventional petrol powered lawn mower to a battery powered solution which is powered by lithium cells. A division to three chapters, comparison, mechanical and electrical, provides fluency of the whole design and further realization. The arrangement of chapters is performed so that the continuity of the thesis is maintained. Calculations of parameters of every motor and transmission with choosing particular devices are just a part of much interesting information which can be found in this thesis. All new components have full documentation except those which were changed during manufacturing. The electrical part explains every part of the schematics in detail. The realization contains difference between preliminary design and further production, manufacturing of the PCB and powering up the motor drives. The last part of the thesis contains temperature measurements of the device at no load.
|
| |
|
Uninterruptible Power Supply
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
Controlled source of pulsed electric field
Burian, Josef ; Kubánek, David (referee) ; Koton, Jaroslav (advisor)
The aim of this master thesis is to design a power source for generating pulsed electric field for the needs of the technological process of electroporation of fruit musts and mashes. To design further the network of switched capacitors and inductors based on the required pulse and to design and implement the basic control unit together with the switching transistors. The thesis will include calculations and simulations used in the draft, also design solutions and measured values. This thesis is divided into several basic parts. In the first part there is discussed in detail the theoretical knowledge of electroporation and the desired characteristics of generated pulses are chosen according to this knowledge. Each part of electroporation workplace is described in the second part of this thesis, beginning from the source through the control system to the electrode chamber. For each of these parts are given different possible alternatives. In the next chapter is already proceeded to the design of the source. There are listed required parameters of the pulses and according to them calculations and the design are gradually carried out. Another chapter deals with the simulations, which are used to verify the calculated values and conditions in the electroporated sample. Last but one part discusses the mechanical design of the workplace. There are described all problems of the construction and commissioning of the product. The last section is dedicated to the workplace measurement and analysis of the measured results.
|