|
|
Reactions of HDPE in the melt initiated by peroxides
Hampapa, Břetislav ; Kučera, František (referee) ; Petrůj, Jaroslav (advisor)
The thesis deals with HDPE modification by crosslinking. In the theoretical part, data available in the literature were reviewed. Modifications of the selected HDPE copolymer grade were carried out in a kneading device Brabender using 25 ml chamber size. After having optimized process conditions, there were performed a series of experiments in dependence on concentration of the initiator. Reological properties of polymer samples were investigated by melt flow indexes measured under different conditions. Changes in crystallinity and melting temperatures were evaluated from DSC heat flow measurements. The samples meeting characteristics supposed were selected for measuring complex viscosity on the Rheometer AR-G2 TA and for testing some mechanical properties on the device Zwick.
|
|
|
Vliv reologických vlastností nátěrových hmot na transparetní povrchové úpravy
Karadinović, Ana
The master thesis deals with the influence of the rheological properties of coating materials on the surface finishing properties. The main rheological properties which were analyzed are viscosity and flow time of the coatings. Water-based, wax and polyurethane coatings were used. The aim was to determine the effect of temperature and dilution of the coatings on their rheological properties. Used coatings were prepared with different properties and applied on different substrates. Laboratory tests of physical-mechanical, chemical and visual properties were carried out. The influence of the rheological properties of the coatings on the properties of the surface finishing was analyzed based on the results of the laboratory tests.
|
|
|
Rheological properties wheat flour mixed with cricket flour.
ČEDÍKOVÁ, Barbora
The diploma thesis is focused on a comprehensive analysis of the rheological properties of the mixture of wheat flour with the addition of cricket flour. In conclusion, based on previous analysis and its own bakery experimet, it has been demonstrated that a mixture with the addition of cricket flour up to 20 % appears to be the optimal application for bakery purposes.
|
|
|
Preparation of hydrogels with the addition of grape pomace extract
Mojžíšek, Jan ; Veselá, Mária (referee) ; Kovalčík, Adriána (advisor)
The scope of this bachelor thesis is the preparation of hydrogels with antioxidant properties. These properties are achieved by the addition of grape pomace extract. The theoretical part of the thesis briefly summarizes the basic characteristics of the gels and describes the basic quantities in rheology. Furthermore, the classification, preparation and use of hydrogels are described. Attention is paid in particular to gels falling into the category of edible hydrogels. Information on antioxidants and matolins is also given. In the experimental part, extracts from grape pomace are characterized in terms of carbohydrate content, phenolic compounds and antioxidant properties. The extraction itself was carried out in different concentrated aqueous ethanol solutions. The extract with the highest total antioxidant activity, as determined by the ABTS method, was used for the preparation of the hydrogels. Agarose is used for the preparation of hydrogels. The change in the rheological properties of the hydrogels due to the addition of the prepared extracts was observed. The specific structures in the hydrogels were determined by FTIR.
|
|
|
Preparation and characterization of chitosan-based materials
Puchírová, Simona ; Kalina, Michal (referee) ; Kovalčík, Adriána (advisor)
The presented diploma thesis focuses on the characterization of the rheological properties of hydrogels based on agarose, alginate, polyvinyl alcohol and the study of the antimicrobial effect of chitosan added to selected hydrogels. The theoretical part is focused on the creating a literature research dealing with the description of the basic characteristics of hydrogels in general, describes the nature, properties, structure and possibilities of its use. In the experimental part, hydrogels without added active substance and hydrogels modified with chitosan were prepared. Based on rheological measurements, suitable combinations of hydrogels with chitosan were selected. A part of the hydrogel was taken from the samples and monitored in a drying and re-swelling process in distilled water. The hydrogels were tested by Ftir analysis, which verified the presence of chitosan in the samples. Monitoring of the antimicrobial effect of chitosan was performed by the hole diffusion method. Efficacy was tested on bacterial strains of Escherichia coli, Candida glabrata, Micrococcus luteus, Serratia marcescens. Most excised hydrogel disks have formed zones of inhibition of various sizes. Inhibition zones were also formed around hydrogels without chitosan, where the sensitivity of individual microbial cultures to acetic acid is assumed. The antibacterial active of chitosan was verified by studying the separate sensitivity of chitosan solutions and acetic acid.
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Terbinafine-loaded biodegradable polymeric systems for topical administration
Pokorná, Tereza ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Tereza Pokorná Title of Diploma thesis Terbinafine-loaded biodegradable polymeric systems for topical administration Supervisor: PharmDr. Eva Šnejdrová, Ph.D. In the diploma thesis the released properties of solid dispersions with terbinafine, based on polyesters of D,L-lactic acid and glycol acid, branched with pentaerythritol and tripentaerythritol are studied. The theoretical part deals with solid dispersions, their classification and methods of preparation, methods of drug dissolution testing, properties, effect, use of terbinafine and preparations containing terbinafine. In the experimental part, solid dispersions were prepared by the melting method. The drug was incorporated into the polyester in the form of a hydrochloride or a base in a concentration of 10 % or 20 %. Some systems were plasticized with 30% triethyl citrate. Thin layers were formulated from solid dispersions, and drug dissolution tests were performed on phosphate buffer pH 7.4 at 37 řC. Assay of terbinafine released was performed spectrophotometrically at 223 nm and ultra-high performance liquid chromatography. Based on the results of this diploma thesis, it can be clearly stated that the suitable carrier of terbinafine...
|
|
|
Influence of formulation factors on the characteristics of terbinafine loaded nanoparticles.
Barák, Vlastimil ; Šnejdrová, Eva (advisor) ; Dittrich, Milan (referee)
CHARLES UNIVERSITY FACULTY OF PHARMACY IN HRADEC KRÁLOVÉ DEPARTMENT OF PHARMACEUTICAL TECHNOLOGY Author: Vlastimil Barák Title of Diploma thesis The influence of formulation factors on the characteristics of terbinafine loaded nanoparticles Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The diploma thesis is focused on biodegradable polymer nanoparticles loaded by terbinafine based on the copolymer of glycolic and lactic acid branched on polyacrylic acid. The nanoprecipitation method was employed, and the influence of formulation factors on nanoparticle characteristics was studied. The following formulation factors were the concentration of the polymer, the amount of terbinafine, and the concentration of surfactant. Nanoparticles of 120 nm to 300 nm were obtained depending on the preparation conditions. The nanoparticle polydispersity was in all cases from 0.080 to 0.230. The prepared nanoparticles were stable, as evidenced by zeta potential values above 38 mV. A positive zeta potential is desirable for dermal and mucosal adhesion in the topical and ocular application of nanoparticles with terbinafine. The amount of polymer used to form nanoparticles has the greatest effect on particle size. With increasing polyester concentration in the internal phase, the size of the...
|
|
|
Rheological properties and biodegradation of Poly (3-hydroxybutyrate-co-4-hydroxybutyrate)
Černeková, Nicole ; Obruča, Stanislav (referee) ; Kovalčík, Adriána (advisor)
This diploma thesis deals with the characterization of rheological properties and biodegradation of a poly(3-hydroxy-co-4-hydroxybutyrate), a copolymer produced by a strain of Cupriavidus malaysiensis. The theoretical part focuses on the rheology and degradation of polymers in general. It also contains the basic characteristics of polyhydroxyalkanoates and deals in more details with the description of the studied copolymer, its properties, synthesis, decomposition and possibilities of its applications. In the experimental part, the given copolymer was investigated in its native form and also in the form of copolymer mixtures filaments, which were enriched with additives (stabilizers and plasticizers). In terms of rheology, the samples showed pseudoplastic behaviour, which was slightly limited by the plasticization of the material. The highest thermal stability observed as a function of changes in complex viscosity over time was observed in a sample of a copolymer mixture containing stabilizers and plasticizer Citrofol BII. The plasticization also caused significant changes in thermal properties, especially crystallinity, which decreased compared to the native copolymer. In vitro degradation studies of samples in the form of films prepared by dissolving copolymer mixtures in chloroform were performed in phosphate buffer with lipase, in simulated body fluid and in synthetic gastric juice. The course of the process itself was characterized by the method of determining the molecular weight (SEC-MALLS) and the weight loss over time (gravimetrically). The results showed that the analysed samples are subject to degradation in all used environments. The most considerable molecular weight loss after 105 days (76 %) was observed in the sample containing stabilizers and plasticizer Citrofol BII in the environment of synthetic gastric juice. The most extensive gravimetric weight loss was attributed to the sample with stabilizers and without plasticizers, in the environment of phosphate buffer with lipase, specifically by 79%.
|
|
|
Rheological properties of modified polymer-composite bone pastes
Hlináková, Kristýna ; Vojtová, Lucy (referee) ; Michlovská, Lenka (advisor)
Předložená diplomová práce je zaměřená na studium viscoelastického chování kostních past na bázi fosforečnanu vápenatého a vodného roztoku termosenzitivního triblokového kopolymeru, zlepšujícího tokové vlastnosti pasty. V teoretické části je zpracována stručná charakteristika cementů na bázi fosforečnanu vápenatého. Rovněž se zabývá charakteristikou reologických vlastností injektabilních kostních past. Součástí je také stručný přehled aditiv ovlivňujících právě reologické a mechanické vlastnosti past. Experimentální část je zaměřena na charakterizaci triblokového kopolymeru pomocí nukleární magnetické rezonanční spektroskopie a reologie. Dále byly připravovány modifikované fosfátové cementy, u kterých byly posléze studovány viskoelastické vlastnosti. Kostní pasta byla modifikována přídavkem adhezivních sloučenin (dopamin a jodičnan sodný) a antibakteriálním činidlem (selenové nanočástice). Analýza viskoelastických vlastností byla provedena reologickou analýzou, během níž byl primárně sledován proces vytvrzování a tixotropní chování jak nemodifikovaných, tak modifikovaných fosfátových past. Proces vytvrzování probíhal při teplotě 23 °C a 37 °C, imitující fyziologické prostředí. Morfologie fosfátové keramiky byla charakterizována pomocí rastrovací elektronové mikroskopie a velikost částic byla zjištěna pomocí laserového analyzátoru částic. Bylo prokázáno, že výše zmíněná aditiva mají pozitivní vliv na kinetiku procesu vytvrzování kostních past. Selenové nanočástice navíc vylepšily tixotropní chování polymer-fosfátových past. Z tohoto důvodu jsou tyto nové injektabilní kompozitní pasty vhodné pro miniinvazivní chirurgii. Díky aditivům, vykazujících adhezivní vlastnosti, mají potenciál uplatnit se při léčbě zlomenin. Stejně tak se nabízí možnost využít pasty při léčbě osteomyelitidy, a to díky možnému uvolňování antibakteriálních nanočástic.
|
guest ::
