|
|
Comparison of design classic and smart wiring of house
Valo, Marek ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This work contains requirements for the design of high-voltage and low-voltage classic and smart wiring. The aim of this work is to implement a project of classic and smart wiring for house and their subsequent comparison. In the beginning is introduction to wiring as such, insight into history, a brief presentation of contemporary species of wiring. The following chapter provides an analysis of high-voltage systems and criteria in its designing, which is based on the currently valid standards. The chapter contains also a brief excerpt dealing with ways of storing wires in buildings and installation zones individual rooms. Chapter of system wiring briefly describes the idea of this kind of wiring and its function. Introduction is focused on explanations of the system wiring, then the chapter directed to a specific producer used in the design of the project itself. In the chapter number five the problem of low voltage wiring and methods for their design are analysed. The following section deals with the design of wiring own project (classic and system) for a family house, designing switchboard, budgeting and technical reports. In conclusion, these two types of wiring are compared in terms of design, project documentation and budget. The practical part is dedicated to creating drawings containing high-voltage and low voltage wiring, switchboard scheme, budget, calculating illuminance and technical reports. The project documentation is discussed further in the technical report.
|
|
|
Design of system wiring of hostel complex, student dormitory and bar
Sladký, Tomáš ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.
|
|
|
Support software for projection of burglar alarm systems
Fikejs, Jan ; Pust, Radim (referee) ; Burda, Karel (advisor)
This graduation thesis deals with a software design of burglar alarm. The software has been developed in compliance with the applicable standards and regulations governing burglar alarm designs and on the basis of practical experience with designing and implementing electronic security systems. The software is written in C# and uses .NET platform. On the ground of that, this software can be run on any computer with the Windows operation system. Any ground plan picture file can be used as the underlying project map on which all the object security system can be built. It makes it possible to produce both wire and wireless electronic security systems. The software includes an editable database of components and conductors used in the electronic security alarms. The database components can be created, edited and deleted through the software. The database has been saved in format XML. The software also includes a folder of picture files containing photographs of the components and schematic symbols used in the software. You use a mouse to drag and drop individual components into the ground plan picture, where they are well arranged in a tree structure. The components can be interconnected by a conductor, which enables creation of a precise design of the electronic security system of the object. The software output includes drawings, bills of material and pricing. As for the space components, you can graphically display their range and thus visually confirm the design. The software includes automatic design verification. There, you can verify whether the right components have been used and whether the designed conductor lengths are acceptable, whether they correspond with the system load, and whether the voltage drops on the conductors do not exceed the permitted limit. The software has been developed for all electronic security system designers and for engineers attending to these problems.
|
|
|
Design of electrical installation of polyfunctional house
Sladký, Tomáš ; Pěcha, Jiří (referee) ; Janík, Daniel (advisor)
The bachelor thesis deals with the design of power and data installations in a multifunctional building. This building is composed of two parts - office space located on the first floor and four residential units located on the second floor. The theoretical part of the bachelor thesis deals with the basic definitions and principles for the creation of project documentation, at the end of the theoretical part is presented the proposal of artificial lighting and the design of emergency lighting of escape routes. In the practical part of the bachelor's thesis there is a completely processed project of electrical installation. The project consists of all the requisites necessary for the realization of the building and contains drawings of the floor plans of the two floors of the building, where the power and data wiring are drawn, also contains the diagrams of the connection of all the cabinets and the electricity meter cabinet, the power distribution diagram, the budget and the technical report. The design of the cabinets was verified using the SICHR calculation program.
|
|
|
Proposal mechanical workshop in a small engineering company
Smrkal, David ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
Bachelor thesis deals with proposal mechanical workshop in a small engineering company. A disposition is proposed for component the gear. It must produce 150 000 pieces per year. The mechanical workshop is intended for serial production of gears, where design gear is supposed to be the most complicated product. On the basis of the literary study a problem of arrangement of workplaces and principle issues of designing mechanical workshop was designed a hall, which was situated in a subject arrangement. Machines are placed according to technological process. The width of hall was chosen a standardized value 18 m. By means of the capacity calculations were determined numbers of machines, workers and the place of the mechanical workshop.
|
|
| |
|
| |
|
|
Modern approaches to designing electrical equipment with a focus on railway construction
Forejtník, Jan ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
The topic Modern Approaches to Designing Electrical Equipment with a Focus on Railway Construction responds to the decision of the Government of the Czech Republic to introduce the BIM method for government over-the-counter contracts from 1 January 2022. The government evaluated the BIM method as an effective tool for digitizing the construction industry. The diploma thesis deals with the method of designing high-current equipment, technologies and distribution on railways according to this new method. The work summarizes information about the present method of design, used high-current electrical equipment on the railway, the near and distant future of railway operation, the organization of administration and maintenance of equipment. It discusses the principle of the BIM method and basic software solutions supporting design activities according to this new method. The Promis.e software published by Bentley is also described in detail, which supports the design of electrical equipment for linear structures according to this method. The BIM method is a means of fulfilling the essence of Construction 4.0. It uses uniform data formats, a common data environment, working with non-graphic information. In the second part of the diploma thesis, the drawing documentation for the sample project of high-current distribution of the railway station was prepared. It was first created using AutoCAD software. After that, the sample project demonstrates the basic principles of the BIM method using Promis.e software. Furthermore, this project is evaluated, both methods of design are compared. The procedure of introducing the BIM method for the design of electrical equipment in a specific design company is proposed and other possible steps in working with the Promis.e software are discussed. The way of creating a and adding element libraries is described. At the end of the diploma thesis it is stated that to successfully master the design work according to the BIM method, it is necessary to have experience with design work in the field, know the principles of the BIM method, choose a suitable software solution, continuously and thoroughly manage these tools and train staff. Under these conditions, it will be possible to make full use of the potential of the BIM method.
|
|
|
Technology project and layout for holder
Mottl, Jan ; Žák, Ladislav (referee) ; Rumíšek, Pavel (advisor)
Technology project and layout for holder. Bachelors thesis of the bachelor’s studies the 3rd year. School year 2008/2009, education group 3P1. FSI VUT in Brno. Institute of technology, department of forming. April 2009, pages 47, pictures 28, tables 2, supplements 9. Bachelors thesis which was elaborated in the frame of the bachelor’s studies branch 2307 submitting the technology project and layout of the holder. Component are produced from material 11 321 using of undermentioned literature pursuit a problem of the select material, sheet metal cutting and bending which was designed by cutting with processual tool and bending tool. At designed cutter and bending was used of standardised components. Project organization of production is designed so, to keep up produce of requisite series in a year.
|
|
|
Project Management with the Possibility of Artificial Intelligence in Information Management
Janková, Martina ; Dvořák,, Jiří (referee) ; Kříž, Jiří (advisor)
Issues of the project management with the possibility of artificial intelligence in information management has been solved in this thesis. The solution of this problem has been made on the basis of the publications listed in the information resources that produce description of initial conditions for the theoretical part of this thesis. The model of the company‘s project management with a selection of artificial intelligence methods in designing the HelpDesk for the company has been created on analysis of information management business basis.
|
guest ::
