|
|
Industry Hall Moravany - Selected parts of the construction-technology plan
Hetteš, Adrián ; Doubek, Rostislav (referee) ; Motyčka, Vít (advisor)
The aim of this diploma thesis is the preparation of a constructional-technology study into the realization of carcass industry hall in the village Moravany u Brna. An itemized budget has been created for the framework alongside a proposal for the main building mechanisms, time management, health and safety plan and environmental management. The thesis is focused on detailed realization of the precast concrete frame which outlines technological regulation and inspection and a trial plan. The thesis further deals with site equipment, possible public transport routes into specific areas and how the main technological stages are developed. In creation of this thesis were used constructional-technological softwares BuildPowerS, CONTEC, ArchiCAD, AutoTurn, Vehicle Tracking and Hluk+9.
|
|
|
New Administrative Building in Karviná, Construction Technological Project
Toman, Marek ; Patloka, Jiří (referee) ; Šlanhof, Jiří (advisor)
The diploma thesis deals with preparation, organization and construction technology of an administrative building in Karviná. It is about new building with four above ground floor. From a design point of view, the structure is designed as a precast concrete frame. The diploma thesis contains technical report, coordinating situation with design of transport ways, time financial plan, study of the implementation of the main technological phases, concept of construction site equipment, design of machinery set, time plan with worker bilancion, material delivery plan for rough building, technical report for masonry work, inspection and test plan for masonry work, item budget with the statement of measurements and noice study for earthworks.
|
|
| |
|
|
Multi-storey precast structure
Polák, Marek ; Šimůnek, Petr (referee) ; Perla, Jan (advisor)
The final thesis is focused on reworking hospital pavilion from cast-in-place structure to precast concrete frame. Calculation of internal forces is made by software system SCIA Engineer. Main load-bearing elements are inner beam, outside beam and all columns in axis 2-C. This thesis contains assembly report, structural design, calculations and drawings of the designed parts, joint details, assembly material drawing and hand calculation.
|
|
|
Restaurant with Microbrewery in Golčův Jeníkov
Wernerová, Lucie ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.
|
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
Structural design of the testing centre
Růžička, Martin ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The master´s thesis concerns with the design of the construction of the testing centre. The hall is divided in two parts, in one of those parts the office rooms are located. The precast concrete frame of the hall is composed by foundation pads, columns, secondary beams and crane beams, precast slabs, and prestressed girders. The thesis contains report, structural design, drawings of floor plans and sections, drawings of formwork and reinforcement, visualization and steps of construction.
|
|
|
Construction and technological project of the polyfunctional buildings in Olomouc
Macháčová, Kateřina ; Kopecký, Lukáš (referee) ; Novotný, Michal (advisor)
The aim of the diploma thesis is to make the detailed building-technological project of the polyfunctional buildings in Olomouc. The thesis contains a summary accompanying technical report, technical regulations, control and test plan. Next parts of the work are time schedule and an itemized budget of the polyfunctional building, time and financial plan of the whole building, calculation of the costs of operating the construction site, Occupational safety and health instructions, traffic situation around building, design of mechanical set, drawings of site equipment. Finally there is also situation of construction, pilot implementation scheme and construction details.
|
|
| |
|
|
Preparation of a prefabricated hall with administration
Schrámek, Martin ; Kučera, Zdeněk (referee) ; Kantová, Radka (advisor)
The subject of the diploma thesis is a preparation of a prefabricated hall with administration in Prace. The production hall will be used to produce glass fiber reinforced concrete. Next part and extension is an administrative part. The text part of the thesis contains a technical report on the building technological project, time and financial plan of the building - object, coordinating situation of the building with broader relations of the transport routes, study of the realization of the main technological stages of the building object, item budget of the main building object, time schedule of the main building, sets of the main technological stages, detection protocols for individual months, limits, balance of resources and personnel, plan of selected material sources, technical report of construction site equipment, technological regulation of precast reinforced concrete frame, technological regulation of precast concrete frame coverings Kingspan panels, Control and test plan of precast concrete frame, covering of precast concrete frame panels Kingspan and ceiling panels of the Spiroll administration, alternative suggestion of the exchange ceiling construction administration and comparison, noise study and thermal technology.
|
guest ::
