|
|
Apartment building
Pavlíček, Jiří ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building. It is a detached basement building, which is located on a rectangular plot with flat terrain. The building is designed with four floors and one underground floor. This new building is equipped with a lift for 8 people. In the underground floor there is a technical background of the building and a storage cellars for individual apartments. There are 12 flats with different disposition and size of floor areas. The load-bearing structural system is diagonal. The lower structure is made of a waterproof concrete, the so-called "white tub" which consists of a reinforced concrete foundation slab and reinforced concrete basement walls. The upper structure is built of Porotherm system, which is insulated with ETICS facade contact system with basalt wool insulation boards. Ceiling structures are designed as monolithic reinforced concrete slabs and the staircase is built as a reinforced concrete monolithic three-armed. The façade is shaped according to the partially opened loggias. The last floor recedes from the face of the building and creates spacious terraces. Holes are filled with wooden windows. The roofing of the apartment building is solved by a single-layer flat roof with a classical layer arrangement and a hydro isolation layer made of asphalt strips.
|
|
|
Apartment house
Kryštof, Filip ; Skřek, Daniel (referee) ; Donaťáková, Dagmar (advisor)
The subject of my bachelor thesis is project documentation for the construction of an apartment building. The apartment building is located in city district Praha 14 – Černý Most and designed as three floors terraced building with two receding floors on the south side. The ground floor consists of technical, storage, and parking spaces. On the second and third floor are two apartment units sized 2+KC (kitchen corner) and two apartment units sized 3+KC. Each individual apartment has its own terrace situated to the south, accessible through an all-glass wall made off of sliding HS portals. Construction system is combination of masonry wall system and cast in place concrete wall system. The building is based on concrete foundation strips. Vertical load-bearing construction on the ground floor is made of cast in place reinforced concrete, and in the floors above as ceramic blocks. The ceiling construction above the ground floor is also designed as cast in place reinforced concrete ceiling and in the grounds above as prefabricated. The roof is solved as single-layer flat roof. The cover of the building is insulated by a contact thermal insulation system ETICS. Part of the building includes internal and external parking places.
|
|
|
Fire station P3 in Hlučín
Komárková, Jana ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of the diploma thesis is a new building of the P3 fire station in Hlučín. The facility will be used to perform the fire protection service of the population of the district fire brigade and municipal volunteer fire fighters. The fire station is designed as an isolated structure of rectangular shape, which is divided into three parts, and it is operationally and structurally interconnected. First part is partly underground two-storey administrative. The second part of the building is an exit garage and the third part forms of the technical background of the fire station. The object is designed as classic brick technology from Porotherm ceramic blocks on reinforced concrete base strips. The roof of part of fire and garage facilities is saddle, the roof of the technical background is flat.
|
|
|
Apartment Building in Šumperk
Macek, Jakub ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The content of this bachelor thesis is the design of a new apartment in Sumperk. The building has 3 above – ground floors and a partial basement. In 1st floor are two apartments and storage areas. In 2nd floor are 3 apartments and in 3rd floor is one spacious apartment. The vertical supporting structures are designed from clay masonry, in the basement of the concrete formwork. The building will be covered by flat roof. The design documentation has been prepared according to valid legal and technical regulations.
|
|
|
Apartment building
Mrázková, Eva ; Vlach, František (referee) ; Struhala, Karel (advisor)
The subject of the thesis is the processing of project documentation for the construction of a residential building in Pasohlávky u Brna. It is a detached building with two above-ground floors. There are 8 residential units in the building, 4 housing units on each floor. The building does not have a cellar, the structure is based on strip foundations from plain concrete in combination with pre-cast permanent formwork from concrete block and foundation slab. The structural system is designed as a masonry system from clay masonry. The external walls are covered with contact thermal insulation ETICS and internal loadbearing walls are design as an acoustic wall. The ceiling structure is made from a cast-in-place reinforced concrete floor. The building is covered with a single-layer flat roof. The project documentation also includes design of terrace, footpath and parking spaces.
|
|
|
Detached house with an establishment
Papst, Ondřej ; Fixelová, Veronika (referee) ; Kacálek, Petr (advisor)
The aim of the bachelor‘s thesis is to work out the design documentation for realization of the construction of the detached house with an establishment in Havlíčkův Brod. The building is detached, it is functionally divided into two parts – detached house, with a partial basement and two above-ground floor, for up to four-members family and into a single-storey establishment used as a butcher’s with up to three-members staff. The structural system of the building is masonry, the basement masonry is consisted of concrete blocks of permament formwork, the others above-ground floor are consisted of clay blocks. The floor structure is designed of cast-in-place reinforced one-way and two way slabs, the roofing of the building is made of warm flat roof with PVC covering. The external walls are supplied with contact thermal insulation system ETICS. The building is set in a lightly sloping terrain.
|
|
|
Flat house Kratochvilka
Vít, Marek ; Karlík, Štěpán (referee) ; Petříček, Tomáš (advisor)
The theme of bachelor´s thesis is the newly built flat house in Kratochvilka. The goal of the work is to develop design documents for building construction. The building is partial basement with three floors and designed by system Porotherm with cast-in-place reinforced concrete floor. The roof system has three different solutions: saddle roof, warm flat roof with asphalt sheets and warm flat green roof. There are 8 dwelling units in the building – 6 of them have capacity 2 person and 2 of them are designed for capacity of 4 person. Furthermore, there are storage spaces for single dwelling units and boiler room in the basement.
|
|
|
Low-energy family house
Veselý, Radim ; Jelínek, Petr (referee) ; Sedlák, Jiří (advisor)
The bachelor´s thesis deals with the processing of project documentation low-energy family house in Třebíč town. The project as well as the addenda are elaborated with regard to contemporary legislature and standards. The family house is situated on a plot of 375/40 in the cadastral Týn u Třebíče. The building has two floors "T" shape without basement. Dimensions of the house are 13,1 x 11,1 m. The roof of the house is designed flat roof. The building is designed from the system Porotherm. The base structure consists of a plain concrete C16/20 and concrete base slab thickness of 150 mm is reinforced by kari´s netting 100/100/6 mm. The enclosed seminar´s thesis deals with the flat roofs.
|
|
|
Apartment building
Hudeček, Vladimír ; Vorlíčková, Petra (referee) ; Kolář, Radim (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Slavkov u Brna on plot number 354/147. The apartment building is designed as separated, partition in three parts. Four storey part without basement and two parts with basement. There are ten apartment units. To each apartment unit belong one basement cellar. There is one parking area with fifteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from mineral wool. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Familly house
Lomský, Robert ; Hejl, Jaroslav (referee) ; Brukner, Bohuslav (advisor)
New multifunctional house in Veselí nad Lužnicí. House is located in a flat terrain. It has two floors. House is a basement. The vertical and horizontal load-bearing structure are of the system POROTHERM. The roof is flat with single casting.
|
guest ::
