|
|
Bandsaw Control System
Filipský, Dalibor ; Arm, Jakub (referee) ; Jirgl, Miroslav (advisor)
This paper describes the design of a control system for a band saw. Content of work can be divided into five parts. The first part contains introduction to the basic functions of a band saw, it’s division and structures. Furthermore, the construction and parameters of a band saw created by an amateur and to which the control system is designed. The second part is dedicated to the design and creation of simulators for bandsaw function, both manual control mode and the automatic mode. The third part deals with the analysis of the risks associated with safety and operational reliability of the device. The fourth part focuses on the design of control algorithms for programmable controller and creating a suitable simulator that will represent a real physical device. In fifth part, designed algorithm is applied and tested on created simulator for bandsaw.
|
|
|
Production technology for a band saw clamp plate
Straka, David ; Kalivoda, Milan (referee) ; Zemčík, Oskar (advisor)
This thesis deals with the proposal of production technologies for a band saw clamp plate. Introduction of thesis is focused on problematics about selected component. In the next section, there are described technologies, which were used in the thesis. Practical part is about proposals of conventional and unconventional production methods. Methods are evaluated in the conclusion of thesis.
|
|
|
Design of a belt saw stand
Kropáč, Jan ; Pavlík, Jan (referee) ; Tůma, Zdeněk (advisor)
This bachelor thesis deals with research in the field of band saws, pedestals and roller conveyors. The output of this work is the design of a new stand for the older band saw PILOUS ARG 220 plus, which includes a foldable roller conveyor. The whole work is complemented by pictures and drawings from the model created in a 3D CAD software.
|
|
|
Electrification and Control System Integration into the mobile log saw
Pospíšil, Jakub ; Bradáč, Zdeněk (referee) ; Arm, Jakub (advisor)
The semestral thesis deals with electrical system design for mobile bandsaw mill electrification. Includes technical data and parameters of the machine its required properties and functions. Contains detail informations necessary for electrical installation and electrical control design. It provides data for printed circuit board manufacture. The reasons for the each eletrical component use are explained. All the design is made with regard to safety and easy to use. Last part is dedicated to the next software development.
|
|
|
Optimization of the laser cutting technology of tubes with a square cross section
Podaný, Petr ; Sigmund, Marian (referee) ; Mrňa, Libor (advisor)
The master thesis deals with the design and manufacture of tabbed joint in the profile with a square cross section using laser cutting. They examine their suitability and impact on the following MAG welding operation in terms of efficiency and accuracy. The theoretical part provides basic information about lasers used in industry and laser cutting methods. There is also a section dedicated to laser apparatus for tube cutting along with problematic about the laser cutting profiles. The experimental part describes the procedure of designing tabbed joint, making samples and measuring them. In the end, the individual samples are compared in terms of angular deflection after welding. The thesis also contains a technical-economic evaluation, where the costs of individual operations are quantified.
|
|
|
Design of a band saw with an automatic exchange of saw blades
Šula, Martin ; Merenus, Ondřej (referee) ; Kočiš, Petr (advisor)
The bachelor thesis deals with the design of a band saw with automatic exchange of three saw bands for cutting of steel rods or profiles. It also deals with the design of solution variants, design of selected variant and calculation. The result of the calculations is the safety check with respect to the elastic limit states, the fatigue control and the bearing life calculation. It also contains an economic assessment of the variant.
|
|
|
Design of a band saw with an automatic exchange of saw blades
Szabari, Šimon ; Halamíček, Lukáš (referee) ; Kočiš, Petr (advisor)
The aim of this thesis is to conduct a research in the field of band saws with a folding arm and to design a band saw with an automatic exchange of saw blades. In the first part of the project there is processed an overview of the division and distribution of band saws available on the market. The second part of the thesis is focused on the design of two variants of band saws, their evaluation, development of selected variant and basic design calculations. The result of this work is a 3D model of band saw, assembly drawing and drawings of three saw bits and also an animation of both variants.
|
|
|
Safety of band saw cutting machine
Bezrodný, Roman ; Bradáč, František (referee) ; Blecha, Petr (advisor)
This Master's thesis summarizes the current legislative requirements resulting from the Directives of the European Parliament and Council and the legislative requirements of the Czech Republic in the field of cutting machines, with a focus on band saws. Furthermore, there is also an analysis of the requirements of the relevant harmonized standards. For information sorting, check lists for the construction of a band saw and a process map of the construction of the saw have been made. In the last part of this work, the selected safety applications were completed for the band saw.
|
|
| |
|
|
Business Plan
Křemen, Josef ; Pilař, Ladislav (advisor) ; Jakub, Jakub (referee)
This thesis evaluates investments based on a business plan. The business plan is developed for the company Agrospol, spol. s r. o. Vračkovice, which intends to expand its product portfolio through the saw-mill site. The company is engaged in agricultural production and operation of the saw would be for her only an ancillary activity to streamline especially human and material resources of the company.
Specific business plan is compiled based on the structure defined in the theoretical part. It contains basic information about the company, organizational structure, product performance, analysis of internal analysis and macro micro surrounding, based on which the SWOT matrix and determined strategy. Thereinafter it describes the marketing activities. Another part of the business plan is focused on information about technology, implementation and risks. The intended investment costs, variable and fixed costs and estimated projected cash flows from the investment are known. In conclusion, the investment is evaluated by selected static and dynamic indicators for evaluating investments.
|
guest ::
