|
|
Sales and service center Prague - the building technological project
Trhlík, Lukáš ; Kotek, Lukáš (referee) ; Biely, Boris (advisor)
In this diploma thesis deals with execution of ground works, foundation constructions, steel and armored concrete monolithic framework of the sales and service center in Prague. Establishment of the building will be done on armored concrete basement feet, strips and basement plate. The building is desinged in part as a steel framework and in part as a armored concrete framework. The building technological project contains for the phases primarily time and financial plan of object, technology prescription, time schedule, budget, model of the building site accessories, model of the machines, check and test plan, safety plan.
|
|
|
Funeral hall in Jevišovka village – rough superstructure
Štěrba, Martin ; Průcha, Aleš (referee) ; Biely, Boris (advisor)
The purpose of this bachelor’s thesis is solving of rough superstructure technological stage of funeral hall in Jevišovka village. Content of this thesis is technical report of rough superstructure stage, solving transport routes and its points of interest, draft of site facilities including its technical report, itemized budget, timetable of works for rough superstructure and suggestion of machinery assembly for this stage. Thesis then focuses on sandwich walls, for which it’s managing technological note and inspection and test plan. Also, part of the thesis is managing of work safety issues on the construction site and elaboration of own task for topic of comparing time limit and economical side of concreting first floor by two different machinery assemblies.
|
|
|
Multipurpose building in Veselí nad Moravou – gross superstructure
Le, Duc Nam ; Doubek, Rostislav (referee) ; Biely, Boris (advisor)
The subject of this bachelor's thesis is the construction technological project of the gross superstructure (without roofing) of a multipurpose house in Veselí nad Moravou. The building is designed as a trapezoidal building with three floors above ground and with a main loadbearing structure made of a steel frame and prestressed ceiling panels. Additional strengthening of the building consists of a gable wall and a reinforcing core made of ceramic blocks. The work includes a technical report focused on the gross superstructure, a technical report on the site equipment, a solution to the broarder traffic relations, a design of the machine lineup, an itemized budget, a time schedule, a technological procedure, an inspection and test plan, safety and health protection at work, environmental protection and a comparison of the construction technology of the RC monolithic staircase and the RC prefabricated staircase.
|
|
|
Auto center VW Mikulov
Kováčik, Branislav ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The aim of this bachelor's thesis was to create documentation for a building permit and documentation for the construction of a building, the basic compositional and architectural design of which is based on a previously processed architectural study within the subject AG033 - Atelier of production buildings. This is a design project of the Volkswagen Group Autocentre in Mikulov. The specified land intended for development is located in the westernmost part of the town of Mikulov in the cadastral territory of the town of Mikulov, it is an industrial zone of the town. The surrounding buildings are largely made up of low-rise large-scale buildings, production halls, storage facilities or agricultural buildings and their accessories. Within the zoning plan, the area adjacent from the south side to Jiráskova Street is listed as a brownfield. The shape of the land predetermines the proposed construction of the longitudinal shape of a deep character, as the land is stretched in the north - south direction and has the shape of a gradually narrowing trapezoid. The terrain is slightly sloping and descends to the south. From the south side, a wastewater treatment plant is adjacent to the solved area. The bachelor's thesis also deals with the solution of the external modifications of the area, including transport infrastructure, stratification and the number of parking spaces. An essential part is also the distribution and character of the upper and lower greenery, the location and shape of the areas intended for demonstration vehicles. Last but not least, the work deals with the solution of engineering networks within the technical equipment of buildings and technical infrastructure, management of waste, etc. The proposed building respects the floor plan delimitation of the land, primarily by maintaining the parallelism of the perimeter walls with these boundaries. The central element of the mass composition is an extravagantly designed ellipse used as the main exhibition space, opened by a large-area rounded glazing into the entrance area of the exterior. The remaining masses of the building are formed by blocks of different height levels, which achieves the compositional principle of gradation. The completely monotonous mass of the production hall is broken in each field by a massive skylight encircling the building along the entire perimeter of its section. The building has premises for warehousing, administrative activities, exhibition premises, technical facilities and premises belonging to professional workplaces of car mechanics. All material segments of the building are interconnected by internal passages. The whole building has a purely industrial character, which is based on the character and purpose of use of the building and has a connection with the automotive industry. The main materials used in the construction of this building are structural steel, concrete and thermal insulation perimeter panels. The façade emphasizes the essence of the ellipse, which is largely-glazed, while the storage and production areas are hidden in the rear and their visual layer is formed by sheet metal in gray, respectively. white color.
|
|
|
Office building, Moravská Nová Ves
Trčková, Michaela ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of this Master’s project is to develop a design documentation for the building permission of a two-storey office building located in Moravská Nová Ves. On the ground floor there are four offices or shops for rent. The first floor is reserved for a café or a bistro. There is also a part of the building which is used as a utility room. The first part of this project is the structural and architectural design of the building. The structural system is the combination of the RC frame and steel frame with steel roof structure. The facade system was designed as a semi structural mullion/transom curtain wall. A part of the ground floor is roofed by a walkable flat roof and semi-intensive green roof. The main roof is pitched roof with an insulation over rafters. The second part of my master thesis is dedicated to building services design. The building is heated by a heat pump and the system of warm water floor heating. There were also used smart led lightening, photovoltaics and rainwater treatment. In the last part, I did research in green walls, and I have made an evaluation how do they effect interior clime and which other benefits do they bring.
|
|
|
Space of cyclic change
Pavlíčková, Tereza ; Jakšík, Petr (referee) ; Rozwalka, Szymon (advisor)
The search for the ideal function and form in response to the cyclical variability of the place offers several possibilities, but each approach to the issue is different. Throughout my work, I have drawn on-site analysis and the study of theatre and concert halls. Last but not least, I have been studying the literature of Rem Koolhaas- Junkspace and the texts of Maxim Gorka, thanks to which I have been able to create a semi-open raster structure and gain a new perspective on the matter and its mutability.
|
|
|
Funeral hall in Jevišovka village – rough superstructure
Štěrba, Martin ; Průcha, Aleš (referee) ; Biely, Boris (advisor)
The purpose of this bachelor’s thesis is solving of rough superstructure technological stage of funeral hall in Jevišovka village. Content of this thesis is technical report of rough superstructure stage, solving transport routes and its points of interest, draft of site facilities including its technical report, itemized budget, timetable of works for rough superstructure and suggestion of machinery assembly for this stage. Thesis then focuses on sandwich walls, for which it’s managing technological note and inspection and test plan. Also, part of the thesis is managing of work safety issues on the construction site and elaboration of own task for topic of comparing time limit and economical side of concreting first floor by two different machinery assemblies.
|
|
|
Autocentrum Brno VW
Kubitová, Markéta ; Rosendorf, Aleš (referee) ; Boleslavská, Yvona (advisor) ; Sedláková, Markéta (advisor)
The aim of the bachelor thesis was to create the documentation for building permit and documentation for the construction of the building, which is based on a previously elaborated study under the subject AG33 - Production Structures. This is a project of the carcentre Volkswagen Group in Brno-Zábrdovice. The assigned building site is located on a flat land and is bordered by the streets Cejl, Jana Svobody, blocks of flats and the river Svitava. The carcentre consists of three functional units - a showroom, a spare parts shop and a garage. Within the framework of the bachelor thesis, a showroom was developed. Compared to the garage it is architecturally more interesting because it is used for the exhibition of VW group cars and it should be interesting for passers-by. At the same time there is a warehouse of the spare parts because of the direct contact of the goods with the showroom and the garage. The object is hallway type, two-storey, non-cellar. There are a passenger lift and a car lift for the exhibition of cars on the 2nd floor. The supporting structure is a steel framing, supplemented with reinforcing elements. The skeleton is based on reinforced concrete beads and interlocked piles due to unstable subsoil. The building is covered with a single-layer flat roof, which is carried by steel girder beams. The casing is made up of Kingspan facade panels, fitted with a perforated stainless steel plate. From the south side (Cejl Street), the facade is made up of a Schüco glass facade system.
|
|
|
Car Center VW Group
Sedláček, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Matějka, Libor (advisor)
Topic of the Bachelor Thesis is a design of the new car centre for VW group. The new building is located at the vacant plot in the city district Brno-Zábrdovice. The main area of the plot is registered as a brownfield number 3402 with former industrial production. The plot is defined by the streets Cejl and Jana Svobody on its north and south boundary, where the connection between those two streets is a typical element of the area. The east boundary is defined by the river Svitava. The plot is slightly sloping to the river. The building is divided into three separate volumes. Each of them is equal to the specific function – showroom, storage and car repair shop for VW, Škoda, Audi and Seat. The designed car centre is a single-storey steel industrial building without cellar. The part of the showroom includes offices on the first floor. The main structural system is defined by the steel frame structure – steel columns and truss girders. Vertical structural elements consist of two U280 steel profiles (showroom) and HEA 260 steel profiles (storage, car repair shop). Horizontal structural elements consist of steel truss girders and steel IPE profiles. Bracing system is designed as a combination of reinforced concrete walls and steel rods. The steel structure is based on reinforced concrete foundation pads with drilled piles. Foundation pads are connected by reinforced concrete strip foundations. The glazed curtain walling of the building’s envelope is formed by Schüco facade system, which is complemented with the significant aluminium shading system of vertical lamellaes Alaris. The rest of the external facades is demonstrated through the Kingspan’s insulated metal wall panels with vertical grooves. Floor and roof structures are defined by trapezoidal sheet with composite concrete slab. Roofing is designed as a warm flat roof with internal roof drains for the whole building. The waterproofing layer is made of SBS modified bitumen membranes.
|
|
|
Sales and service center Prague - the building technological project
Trhlík, Lukáš ; Kotek, Lukáš (referee) ; Biely, Boris (advisor)
In this diploma thesis deals with execution of ground works, foundation constructions, steel and armored concrete monolithic framework of the sales and service center in Prague. Establishment of the building will be done on armored concrete basement feet, strips and basement plate. The building is desinged in part as a steel framework and in part as a armored concrete framework. The building technological project contains for the phases primarily time and financial plan of object, technology prescription, time schedule, budget, model of the building site accessories, model of the machines, check and test plan, safety plan.
|
guest ::
