|
|
Mixed-use building in Mikulov
Machů, Kateřina ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Hradil, Dušan (advisor)
The bachelor's thesis follows a project developed within the subject AG033 Studio of Architectural Creation. The subject of design is a multifunctional house, which is located in the place of a gap on a sloping, uneven terrain, which currently serves as a parking lot or market place. The design of the multifuncitonal house is located under the castle walls of the Mikulov castle gardens, on a street of Alfons Mucha. It is located in the area of the urban conversation zone, wich was declared in Mikulov in 1982. Due to the character of Mikulov and its development, where the terrain is sloping from the street, the proposed multifunctional house is optically divided by changing the roof height into two imaginary houses. but inside they still have the same floor level. Due to the fact that the adjacent buildings are about same high, the proposed multifunctional house is four-story, of which the top floor is adjacent to the attic and outdoor terrace. The first floor of a multifunctional house is assigned to commerce (cafe, rentable space). On the second and third floors there are already apartments and a porch, which allows access only to apartments that will be used only for short-term rental. There is also a great demand for the improvement of the remaining adjoining space, which is adjacent to the walls of the Mikulov castle, and also the restoration of the wine cellar, which was walled up on this plot. A staircase will be designed, which will lead from street of Alfons Mucha, through which it will be possible to connect directly to the castle walls and further to the Mikulov castle ot it will be possible to go to the wine cellar and the adjacent outdoor terrace. The facade is designed with regard to the surrounding buildings. They are designed in white or light gray plaster. I take into account the fact that the multifunctional house is located in the area of the urban conversation zone. The roof of the building is traditional gable roof, with brick colour.
|
|
|
Multifunctional house in Brno
Kalíšková, Eliška ; Žák, Libor (referee) ; Boleslavská, Yvona (advisor) ; Petříček, Tomáš (advisor)
The main aim of this work is the solution of a new multifunctional building in Židenice, Brno, on the Corner of Táborská and Nezamyslova. The conception has been set by the place which is very close to the Chapel of St. F. of Assisi and by urban plans an local people’s needs and interests. The building has been designed not to damage the look of the local houses and streets and the first floor has been supposed to be used for another purpose than housing. The house was originally designed only like the first floor building. There are other houses which have got from 3 to 5 floors in neighbourhood streets. Among other places there are grammar school, school of Arts, shops and services. The problem was to place this building among the houses with various height by the special shape of the roof. The final effect causes no disharmony in the streets. This house is situated among the others perfectly in the corner position and keep the other houses‘ height from both of the streets. The aim of the multifunctional object is filled up by the first floor and housing in the floors above. In spite of the fact that there is a lack of the car parks the new underground parking site has been set up. The flats here have been designed according to local people’s interests.
|
|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
|
Multifunctional house in Svitavy
Fučík, Lukáš ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
This project deals with a design of a multifunctional house in Svitavy. The object is designed as a building without a basement, detached house with four above-ground floors. It is fitted into flat terrain. Newly built multifunctional house serves two main functions. The first is the creation of nine housing units, which are accessible from the central staircase and have an individually designed entrance. The second function of the new building is commercial utilization. There are three business premises in the house, each of them has its own sanitary facilities and separate entrance. The roof is designed as single-layered, flat, composed of asphalt strips. The structural system of the building is brick, made of ceramic blocks. The building is insulated with a contact insulation system.
|
|
| |
|
|
Ventilation of a multifunctional house
Husák, Martin ; Rubina, Aleš (referee) ; Rubinová, Olga (advisor)
The bachelor's thesis deals with the design of ventilation equipment and air conditioning for a multifunctional building, which has 4 doctor's offices, a hairdresser, a driving school and 3 residential flats. The house is designed to meet all the necessary requirements regarding ventilation. Air handling units are designed to discharge degraded air to the exterior and bring fresh air back. Thermal comfort for the winter is ensured by radiators and in the summer by air conditioning. The theoretical part is focused on climatic conditions for the design of air conditioners, refrigeration systems and refrigerants.
|
|
|
Multifunctional house in Velké Opatovice
Dostál, Jan ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
This master's thesis addresses the processing of project documentation for construction of three storey, multifunctional house in Velké Opatovice. The building is designed on flat terrain, it is terrace graded to the east and south and has a warm flat roof. On the first floor there is a pharmacy, travel agency, textile shop and technical facilities of the building. On the second floor there is an office space for advertising and graphics company. The third floor is designed as a large-area apartment for a family of four.
|
|
|
Construction technological project of a multifunctional house on Cihlářská Street in Brno
Kaman, Tomáš ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
This diploma thesis deals with selected parts of the construction technology project of a multifunctional house in Brno on Cihlářská Street. Thesis contains a technical report, coordination situation and marking of transport routes of vehicles, time and financial plan of construction, study of the main technological stages of building, technical report of site equipment including drawing of site equipment, design of main construction machines including verification of bearing capacity and reach object, technology prescription and control and test plan for monolithic ceiling structure. The diploma thesis also includes selected LEED certification credits and a health and safety plan.
|
|
|
Multifunctional house
Štrop, Jaroslav ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
Master´s thesis of Multifunctional house is compile in project documentation by legislation in force. Design object is situated on plats 877/1, 877/2 in Jičín. Building is divided on two parts – administrative section, determined for project-atelier and apartment section with five apartments. It is four-storey cellarless building with flat roof. The both sections have barrier-free access to object including parking and elevators. In apartment section is barrier-free apartment in downstairs. Project is compile including static analysis of connection girder, fire safety solution and thermal technical assessment.
|
|
|
Multifunctional house in Uherské Hradiště
Hanák, Martin ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
THE AIM OF THIS DIPLOMA´S THESIS IS A NEW BUILDING OF A MULTIFUNCTIONAL HOUSE IN UHERSKÉ HRADIŠTĚ. THE BUILDING HAS THREE FLOORS AND ONE PARTLY UNDERGROUD FLOOR. THE UNDERGROUND FLOOR IS USED AS A STORAGE SPACE FOR THE BULDING‘S USERS AND AS A TECHNICAL SURROUNDINGS OF THE FACILITY. FIRST FLOOR IS USED AS A COMMERCIAL PREMISES, AS A BOULDER CENTRUM, COFFEE HOUSE AND SALES. THERE ARE SEVEN APARTMENT UNITS ON EACH FLOOR 1+KK, 2+KK, 3+KK AND 4+KK. OVERALL THERE ARE FOURTEEN APARTMENT UNITS, ALL FLATS ARE DESIGNED IN THE SAME WAY ON EACH FLOOR. THE WHOLE BUILDING IS ALSO EQUIPPED WITH A LIFT, IT IS A MASONRY BUILDING MADE WITH YTONG SYSTEM WITH CAST-IN-PLACE REINFORCED CONCRETE CEILING AND A FLAT GREEN ROOF. THE CONSTRUCTION ITSELF FITS IN THE SURROUNDINGS OF THE HOUSING DEVELOPMENT.
|
guest ::
