|
|
Vibration Propagation Analysis of Coupled Structure Acoustic Space
Kostelník, Jan ; Pellant, Karel (referee) ; Novotný, Pavel (advisor)
The aim of this Master’s thesis Vibration Propagation Analysis of Coupled Structure Acoustic Space is to analyze vibration propagation in combustion engine, from combustion space through solid structure to fluid surroundings. Then analyze the noise increase as pressure changing in fluid space around the solid structure. There was made a analyze of single piston engine in different frequency and piston location. A simulation of distribution of a pressure waves was made in an ANSYS application.
|
|
|
Piston for 96kW 4-stroke SI-engine
Josefíková, Kateřina ; Svída, David (referee) ; Dundálek, Radim (advisor)
This bachelor`s thesis will deal with calculating suggestion and structural solution piston for 4-stroke petrol engine. Next then determination basic dimensions engine and crak mechanism. On the basis empirical detail will determine basic dimensions piston. For designed kinematics crank mechanism will perform fort control critical sectin piston
|
|
|
Analysis of dynamic load from induction machine current signature
Pavláček, Jan ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This thesis focuses on the analysis of the dynamic behavior of the load from the measurement of stator currents of induction motor. Work is sorted from basic engine failures equations, mathematical models, types of signal processing, simulation and measurement. The practical part deals with the design of the motor model in Matlab Simulink, the simulated and the measurement of the pump BETA 12 YC On the Department of Fluid Engineering Victor Kaplan. Use appropriate types of signal processing evaluate the results. The aim of this work is to analyze the dynamic changes of the load.
|
|
|
Propulsion unit of competition model airplane
Vančo, Miroslav ; Matějů, Jiří (referee) ; Hájek, Tomáš (advisor)
This bachelor´s thesis deals with the design and validation of the operation of the model propulsion system, according to the Aero Design East rules. The introduction is focused on rules and regulations of the competition and then, the point analysis is carried out. The research section is devoted to an overview of the propulsion system components and their basic parameters. The most appropriate configurations of the propulsion system are selected, based on calculations from the manufacturer´s datasheet. These configurations are then validated by measurements of static thrust and measurements in aerodynamic tunnel. In these measurements, the responses of the limiter for boundary power are also examined. In the last part, the choice of the propulsion system is completed.
|
|
|
Analysis of traction drive for full electric vehicle
Matela, Petr ; Marušinec, Jaromír (referee) ; Solař, Martin (advisor)
The subject of my bachelor´s thesis is research and computations of the dynamics of different types of engines. The first part of it is devoted to theoretical introduction to electromobilism and electro mobiles history. The rest is about benefits and problems of electro mobiles, their current state and available energy sources. In the conclusion of this thesis there are all necessary calculations and the dynamics of three different engine types is solved and compared.
|
|
| |
|
|
Powertrain of in-line three-cylinder diesel engine
Riemel, Pavel ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Objective of bachelor’s thesis is for main predetermined geometric, thermodynamic and operation parameters cylindrical unit of line three-cylinder compression-ignition engine perform calculation of thermodynamic cycle, project basic dimensions of piston group and for noted operating modes perform strength check of con rod eye. Resulting values compare with comparable compression-ignition engine and verify its appropriate functionality. In preamble of work is mentioned compression-ignition engine, its basic usage, principle of function and description its main parts. The work is compound of two basic parts. The first contains description of calculation with related graphic and the second calculating supplement in which are calculations of thermodynamic cycle, forces reacting on piston group, strength calculation and control of con rod eye. At the close results of calculation are analysed.
|
|
|
Powertrain of in-line five-cylinder diesel engine
Zarambukas, Michalis ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this graduation theses is geometrical and thermodynamic calculation of determined five-cylinder diesel engine and calculation of operation parameters of cylindrical unit and then to compare them with real motor and strike the balance. Other step is to work out thermodynamic cycle and draw the result in p-V diagram. Then to calculate power, effecting on piston which includes proposal of basic proportion of piston and wrist pin, and it follows weigh of piston group and maximal quickening and inertial force of piston group, calculation of specific pressure and pressure in wrist pin. Other purpose is to determine basic proportion for piston rod and to focus on material qualities of con rod eye and bronze case, determination of maximal pressure due to inertial forces comming from gas pressure and security against possible slip and tiredness. At the beginning is described diesel engine from its foundation, its activity to its use in company. At the close are reviewed the results of the calculations.
|
|
|
Stage IV Emission Standards for Tractor Engines
Vít, Jakub ; Beran, Martin (referee) ; Dundálek, Radim (advisor)
The aim of this bachelor thesis is to explain the mechanism of injection of carbamide and its installation on a vehicle. The first part of this work deals with the reduction of pollutants in the exhaust gases and with the emissions standards which limit the level of pollutants in the exhaust gases. The second part consists of an overview of tractor brands available at Czech market and their classification based on the type of system they use on their new models to reduce the pollutants in the exhaust gases.
|
|
|
MIL real time simulation of electrical motors
Bartík, Ondřej ; Veselý, Libor (referee) ; Blaha, Petr (advisor)
The goal of this thesis is how to implement the two different types of the electric alternate motors in ZYNQ-7000 device for MIL real-time simulation purposes. The chosen types of motors are BLDC motor and AC induction motor. Mathematics models of these motor, the necessary changes for implementation purposes and the way how the models were implemented in ZYNQ-7000 device are described in this work. Three different experimental MIL simulation, using these motors ae described at the end of this thesis.
|
guest ::
