|
|
Car showroom
Kováčová, Zuzana ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The subject of the Bachelor thesis is a static and structural design of a steel construction of a car showroom in Trnava. I tis a two-bay construction with a mono-pitched roof. As a first, the load was calculated, next the structural version was determinet. Structural analysis was made with Dlubal RFEM software. Main load-bearing elements were designed and checked, including reinforcing members, column anchorage and selected connections. Were made a calculations, drawing documentation and technical report.
|
|
|
Prefabricated construction od car-showroom
Wolf, Jiří ; Švaříčková, Ivana (referee) ; Zlámal, Martin (advisor)
Aim of the final thesis is to create loadbearing prefabricated structure of building, which serve like office building and area for car-showroom, and creating static assessment of main supporting parts. For those parts will make drawing documentation of reinforcement and shapes. Computational 3D model for evaluation of internal forces is realized in Dlubal RFEM 5.07 software. For better check and comparison were create 2D spatial bar models of selected frames.
|
|
|
Autocentrum Brno VW
Kubitová, Markéta ; Rosendorf, Aleš (referee) ; Boleslavská, Yvona (advisor) ; Sedláková, Markéta (advisor)
The aim of the bachelor thesis was to create the documentation for building permit and documentation for the construction of the building, which is based on a previously elaborated study under the subject AG33 - Production Structures. This is a project of the carcentre Volkswagen Group in Brno-Zábrdovice. The assigned building site is located on a flat land and is bordered by the streets Cejl, Jana Svobody, blocks of flats and the river Svitava. The carcentre consists of three functional units - a showroom, a spare parts shop and a garage. Within the framework of the bachelor thesis, a showroom was developed. Compared to the garage it is architecturally more interesting because it is used for the exhibition of VW group cars and it should be interesting for passers-by. At the same time there is a warehouse of the spare parts because of the direct contact of the goods with the showroom and the garage. The object is hallway type, two-storey, non-cellar. There are a passenger lift and a car lift for the exhibition of cars on the 2nd floor. The supporting structure is a steel framing, supplemented with reinforcing elements. The skeleton is based on reinforced concrete beads and interlocked piles due to unstable subsoil. The building is covered with a single-layer flat roof, which is carried by steel girder beams. The casing is made up of Kingspan facade panels, fitted with a perforated stainless steel plate. From the south side (Cejl Street), the facade is made up of a Schüco glass facade system.
|
|
|
Car Showroom, Holešov
Olšáková, Klára ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The task of the master's thesis is to elaborate a project documentation for construction works for new car showroom in Holešov. The new building is located in the cadastral territory of Všetuly. The building is designed as a two-story, detached, set on a flat plot of land. The first floor can be divided into a car showroom, technical and hygienic facilities for employees and customers, and into a car service. On the second floor, there are offices, a meeting room, an archive and hygienic facilities. The entrance to the building is oriented from the north side of the building. The car showroom is based on a foundation of pre-fabricated cup footings connected by means of pre-fabricated reinforced concrete foundation sills. The supporting system of the building consists of a prefabricated reinforced concrete skeleton. Ceramic masonry are used as infill masonry. The ceiling structures are designed as pre-stressed reinforced concrete panels. A single-arm prefabricated reinforced concrete staircase with the mezzanine connects the individual floors, which is located inside the building. The roof of the building is designed as a flat vegetation extensive roof. The building is insulated with boards made of glass mineral wool and sheathed using a ventilated facade system with cladding made of bond boards.
|
|
|
Steel construction of the car showroom
Bystrianská, Kateřina ; Pilgr, Milan (referee) ; Štrba, Michal (advisor)
The diploma thesis deals with the design and assessment of the steel construction of the car showroom in Jihlava. The ground dimensions of the structure are 40,0 x 52,0 m and the height at the highest point is 13,14 m. The supporting structure consists of a truss girder consisting of a set of arches, outer columns and an inner column with a strut. This is a freebase system, the distance of the bindings is 4.0 m. In the framework of the work is elaborated the comparison of two variants, more suitable includes the static calculation of the main supporting parts, including the joints and details. The main construction material is steel, grade S 355.
|
|
|
Car Showroom
Schusterová, Soňa ; Brzoň, Roman (referee) ; Bečkovská, Tereza (advisor)
This thesis deals with the elaboration of construction project documentation of newly built car showroom with authorized service station and financial centre located in the city of Kroměříž. The building was designed as self-standing with one underground and two above ground floors and is conceptually divided into three tracts – car showroom itself, technical facilities and authorized service station. There are underground garages, storage of new cars and technical rooms situated in the basement. Showroom, sanitary facilities and operational premises, separate client services such as reception, new car selling desk, service station desk, spare parts selling desk or reception technician desk are situated on the ground floor. Also there are storage of spare parts, car wash with utility room and facilities for employees of service station. Service station itself and storage of tires are adjacent to these areas. First floor is only partial and includes financial department, offices and directorate. Construction system of this building is designed as reinforced concrete skeleton with cross-reinforced boards. The skeleton is partially blocked by porous concrete blocks 300 mm thick with thermal insulation of mineral wool 200 mm thick (main part) and 160 mm thick (service station, storage). The facade is ventilated and glazed facade system is used.
|
|
|
Autosalon
Balúch, Tomáš ; Pospíšil, Jaroslav (referee) ; Pěnčík, Jan (advisor)
This master's thesis focuses on design and elaboration of documentation for construction of a Car Showroom. The building is divided to two functional parts. The building is to be situated on plot number 1333/21, cadastre unit: Bohunice. The building is to be located on an undeveloped plot in possesion of the investor. The parking lots are connected to a local road. All substantial infrastructures are located nearby the plot. The proposition and the design of the building have respect for both commune plan and current buildings. The documentation is elaborated with regard to the contemporary Czech legislative and standards. The project designs the building, which is divided in two functional parts: SO 01 & SO 02, both operationally and visually connected. Contructions of objects are structurally independent. The first object includes exhibition hall with capacity of 8 exhibited cars. There is also to be located the administrative part, waiting rooms for customers, facilities for employees and the warehouse. The second object includes car repair shop. There are also to be located facilities for employees of the service, workshop, room for a car handover, hand car wash and an utility room. Construction is designed as a reinforced concrete columnar structural system with prefabricated single footings, self-supporting foundation slab and reinforced concrete ceiling slab with integrated girders above first floor of the object SO 01. The roofs of the building are designed as a flat roofs and the support constructions are made of steel. Planned dimensions of autosalon are 41x18 metres. As a cladding of the first object is used the lightweight glass cladding. For masonry walls are used the 250 mm thick ceramic blocks, mineral insulation and ventilated external facade cladding with use of fiber-cement boards. Planned dimensions of car repair shop are 31x28 metres. As a cladding of the second object are used the sandwich panels with foam core made of PIR.
|
|
|
The Showroom Structure in Jihlava
Stloukal, Radim ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
The subject of this thesis is a structural design of a car showroom in municipality Jihlava. For this purpose two different concepts were developed. The main bearing system of the first consists of steel truss girder supported by single profile steel columns. The second idea, a structure with axial ground area 36,0 x 18,5-23,5 m , is made from glue laminated timber. The second mentioned concept was chosen for detailed calculation and documentation. The structure was modelled by 1D member while using Scia Engineer. Results obtained from the computer analysis were taken and main strutctural members were check by manual calculation.
|
|
|
Air conditioning design in a car showroom
Satina, Marek ; Uher, Pavel (referee) ; Blasinski, Petr (advisor)
The bachelor‘s thesis deals with the design of air conditioning units for the car showroom in Brno. The work is divided into three parts. The first theoretical part is focused on individual types of distribution elements and their use. The second part deals with the actual design of individual air conditioning units. In the last third part of the bachelor’s thesis a project is processed, which contains an engineering report and technical drawings.
|
|
|
Auto center VW Group Mikulov
Vácha, Adam ; Maar, Radek (referee) ; Boleslavská, Yvona (advisor)
The task of the bachelor thesis was to design the Volkswagen Group Autocentre in the industrial part of Mikulov. The study was originally prepared in the subject AG033 - Studio of Production Buildings. Thus, I completed it according to the requirements of the DSP and DPS. Currently, the land in question is part of an agricultural cooperative. From the north-western side the land is bordered by Jiráskova Street, from the south-eastern side by Republican Defence Street. The proposed building is divided into three masses. This layout is based on the functional justification of the building. The showroom is used for the display and sale of new vehicles of the brands associated with the Volkswagen Group. It is followed by a warehouse, which is used both for storage for direct sales and mainly for spare parts for the service. The second floor above the warehouse houses the administration o*ices. These are connected to the showroom by a staircase. Next to the warehouse, there is also a service reception and a connecting corridor between the showroom and the service. The workshop also includes facilities for mechanics, which include changing rooms and sanitary facilities. There is also a technical room and a foreman's office. At the rear of the workshop is the paint shop, which is separated by a partition. The whole building is unbasement and except for the part above the warehouse is one storey. The showroom and the workshop are made up of a skeleton of reinforced concrete columns connected by steel trusses. The part of the warehouse with o*ices is then a reinforced concrete monolith. The ceilings in the halls are then reinforced with trapezoidal sheets with reinforced concrete slab. The façade of the showroom consists of a glazed lightweight cladding and the service area is again using a Dri-design Kingspan system. The partitions are made of plasterboard. All parts of the building are covered with a single-skin flat roof. Above the service area the roof is vegetated. The drainage of the showroom and service area is solved by means of drainage gutters with downpipes. The o*ices are then provided with internal drains.
|
guest ::
