|
|
Heating systems of multifunctional houses with renewable sources
Požár, Tomáš ; Počinková, Marcela (referee) ; Formánek, Marian (advisor)
The main of the bacherol´s thesis is the heating solution of the polyfuncional object, with arbitary renewable resource. The thesis is divided into three parts. The first is theoretical part, the second is computational part, the third is project part. The theoretical part deals with renewable resources, their history, species, components, heating elements, underfloor heating. The compuational part involves the design of heating. The object is divided into three parts, commercial, communication and apartment part. The first and second part are heating by raditors, the third part is heating by underfloor heating. The project part contains prepared based on the computational part and technical report.
|
|
|
Apartment Building
Shejbalová, Julie ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The subject of the bachelor thesis is the development of project documentation for the new construction of a residential building at the level of construction implementation. The proposed building is located in the outskirts of the village of Chrudim in the locality Na Špici. The main task was to create a pleasant environment for the inhabitants of the house while respecting the character of the surrounding buildings. The Na Špici locality is sought after for its modern appearance and attractive location. It is a detached U-shaped building with three above-ground and one underground floor. On the underground floor there is a collective garage, cellar and technical background of the apartment building. Only residential units are located on the above-ground floors. Each floor has five residential units of different layouts. The main entrance to the building is from the north-west side through the entrance gate, the entrance to the collective garage is on the opposite side, so as to minimize the noise from car traffic, which would negatively affect the environment of the courtyard with greenery. All the floors are connected by an external staircase and lift with a connection to the external pavements that run through the courtyard and form a communication between the apartments. The structural system is made of aerated concrete blocks in combination with reinforced concrete and sand-lime blocks. The foundation of the building is based on plain concrete footings. The horizontal bearing structures are made of monolithic reinforced concrete slabs and the roofing is designed with extensive vegetation.
|
|
|
Apartment building
Lužná, Hana ; Lavický, Miloš (referee) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the preparation of project documentation for the new construction of an apartment building in Prostějov. The building has four above-ground and one underground floors. The terrain around the building is slightly sloping. There are a total of nine apartments in the above-ground units ranging in size from 1+kk to 5+kk. On the first above-ground floor, a wheelhouse, a carriage room, a cleaning room, a technical room and an air conditioning machine room are designed. There are also designed cellar cubicles for individual apartments. On the first underground floor, a collective garage with parking for eight cars. Wall construction system. Support structures made of Porotherm blocks. The ceilings are made of reinforced concrete monolithic ceiling slabs. The roof is designed as a flat vegetation roof. The building is based on foundation strips made of simple concrete. Columns designed reinforced concrete footings.
|
|
|
Residential building
Muhamed, Noshdar ; Vorlíčková, Petra (referee) ; Kalousek, Miloš (advisor)
The subject of the bachelor thesis is a new building of an apartment building and elaboration of documentation for construction. The apartment building is located in the spa town in Teplice. The proposed building is designed as a separate, basement, with three above -ground floors, seated on a slightly sloping terrain. In the basement there is the technical background of the apartment building together with cellar cores for individual apartments. On the first floor there are two apartments and one apartment with its own front garden. On the second floor there are two apartments with their own balconies. On the third floor there are two flats as on the second floor. In front of the building there is a large parking lot, the apartment building is designed barrier -free thanks to the internal elevator. The construction system of the building is wall, two -way, above ground floors are brick of ceramic blocks. The peripheral masonry of the basement is bricked from the lost formwork. The horizontal load -bearing structures are prefamonolithic, composed of sweat beams and ceramic inserts Miako. The building is based on the foundation passports and covered with a single -shed flat roof.
|
|
|
Family house with cinema room
Kurka, Štěpán ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
As part of the bachelor's thesis, project documentation was developed at the construction implementation level within the partially required scope. The documentation includes a project for a family house located in the northern part of the village of Kobeřice in Silesia. The new building is integrated into an already developed area of the village and is set into the terrain, taking advantage of the sloping land for the operational solution. The building is designed as a single dwelling unit for permanent residence by five people, with technical facilities and garage space. Access to the dwelling unit is provided from the west side to the first above-ground floor. From a material perspective, the building is designed using predominantly ceramic blocks for both load-bearing and non-load-bearing vertical structures. The building envelope is insulated with an ETICS system to reduce energy consumption. The construction is based on monolithic foundation strips with a base concrete slab. The ceiling structures in the building are made of monolithic reinforced concrete slabs. The building is roofed with two flat single-layer roofs at different height levels. The roof at the lower level is designed with a vegetative surface finish.
|
|
|
Detached house Křenovičák
Pagáčová, Nikola ; Kolář, Radim (referee) ; Jelínek, Petr (advisor)
The aim of the bachelor´s project is to design a single-family detached house ,,Křenovičák”. The thesis has two parts: the project documentation for a building permit, and documentation of heating systems, etc. The house is located in Křenovice u Slavkova. It´s make an L-shape. The ground floor has partly a roof slab with a green roof, the first floor has a roof slab with aggregate. Floor slab over first floor is partly supported by three columns. On the first floor, you can find a lobby, a corridor, a bathroom, an utility room, a study room, and living space connected with a kitchen and dining space next to terrace. On the second floor is a master bedroom, two separate rooms for children, a bathroom, a separate toilet, and another study room. Walls are from ceramic blocks and slabs are from precast concrete panels. There´s ground-water heat pump with ground well connected with floor heating system and 200 litres hot water cylinder. House using water mains and main sewer. Main concept design is focused on mechanical ventilation system with heat recovery. Ventilation rate is 400 m3/h, because of cooker hood. There´s equal pressure ventilation. Fans are connected to supply by flexible ducts. House is connected to electricity grid. On the higher roof are photovoltaic panels to generate electricity. Excess energy is stored in batteries. Supply ducts and pipes are in ceiling voids. The documentation is included Energy Performance Certificate.
|
|
|
Apartment building Blansko-Písečná
Flek, Vojtěch ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
The subject of the bachelor's thesis is the development of project documentation for the new construction of an apartment building in Blansko. The building has four above-ground floors. The main entrances to the building are located on the first floor above ground. There are sixteen apartment units in the building, which are connected by a common corridor. On the ground floor there are garages, cellar boxes, storage, carriage house, technical and cleaning room. The other floors are intended for living only. The structural system of the object is designed as a wall system. The foundation will be solved with foundation passes made of plain concrete. The ceilings are monolithic reinforced concrete slabs. The roof is designed flat with a coating of polyolefin film. The bachelor's thesis contains project documentation for the implementation of the construction.
|
|
|
Technological stage of the upper rough construction of an apartment building in Brno
Klech, Ivo ; Strádalová, Aneta (referee) ; Kantová, Radka (advisor)
The main aim of my bachelor thesis is the construction technological solution of the rough upper construction of the residential building located in Brno in Sadová street. This thesis contains a technical report of the given technological stage, a situation of the building with broader relations of transport routes, a statement of dimensions for the technological stage, a technological regulation including a balance of resources with a variant solution of the partition masonry, a drawing of the construction site equipment together with the technical report, timetables with a variant solution, a design of the machine assembly, an inspection and testing plan for the masonry stage and ensuring work safety. The last chapter of this work is the itemized budget for the variant solutions and selected construction details.
|
|
|
Relaxation and exercise center
Kalábková, Ladislava ; Obrtlík, Jan (referee) ; Májek, Jan (advisor)
The bachelor thesis focuses on the design of an administrative building on Soukenická Street in the bustling part of Brno. Currently, the plot houses buildings with zero utilization, deteriorating structures, and a parking lot. The entire area is unattractive, has limited use, and negatively affects the aesthetics of the intersection of two important streets – Soukenická and Hybešova. The architectural design includes the creation of an attractive corner building with multifunctional use, an underground garage, and a connection to the existing Malá Amerika building, which could have a new functional purpose as a commercial and restaurant passage or art studios. The administrative building offers a ground floor with a restaurant, bistro, café, and shop. Spaces are variable, allowing owners to customize them according to their needs. Additional above-ground floors are equipped with offices, both for larger groups and individuals. The seventh floor features a green accessible roof, a café, and meeting and presentation rooms. The bachelor thesis delves into the details of the administrative building section housing the main staircase with an elevator. Simultaneously, the design incorporates the connection of Soukenická Street with Malá Amerika through a passage in the proposed structure, aiming for potential future use of the building. The work stems from the architectural design studio in the second year, focusing on public structures.
|
|
|
Víchov cider house and cannery
Holíková, Magdaléna ; Muroň, Ivo (referee) ; Ležatka, Lukáš (advisor)
The subject of the bachelor thesis is the preparation of project documentation for building permits and part of the documentation for the implementation of construction based on the assignment, witch was provided in the course BGA021 – Architectural Design Studio 2. in the winter semester of the 2nd year on the topic of industrial building. The subject of the study is the design of a new industrial building. The facility will be used for the production and distribution of cider and it is presentation to the public. The parcel is located in the village of Víchov, which belongd to the catchment area of Černošín, in the Tachov district in the Pilden region. The concept of the architectural concept was to create a space that would suit the intended industrual aktivity, while at the same time it is material design would not contrast with the architecture of the nearby village. There are 3 single-storey volumes which, with their shape and butteresses, mirror the function located in them. The production area, finished in gray plaster, is elevated and covered by a shed roof. The storage area is finished in gray plaster and covered by a flat green roof. The main volume is finished in white plaster, This functional unit includes a showroom, entrance hall, changing room, offices and staff canteen with access to the atrium.
|
guest ::
