|
|
Acoustical analysis of mechanical watsches
Dohnal, Marek ; Balík, Miroslav (referee) ; Sigmund, Milan (advisor)
This thesis is focused on the analysis of the characteristics of mechanical watches on the basis of their sound. There are theoretically analysed usual mechanical defects and disorders of watches and compensation of those defects. Particular attention is given to disorders, that can be extracted from the recorded acoustic sound of watches. There are also solved most appropriate methods of recording with a respect to the minimisation of ambient acoustic interference. The main part of this work is experimental measurement on watches and evaluation of achieved acoustic data. For this purpose, an autonomously running software were developed.
|
|
|
Civic amenities building
Tesař, Ondřej ; Svoboda, David (referee) ; Berková, Petra (advisor)
The aim of this Master´s project is the design of the elementary art school in Slavkov u Brna. The thesis is divided into three parts. The first part deals with architectural and structural design of the building, the second part with design of selected building services, and the third part with a noise study of the building. The building has two floors and a flat green roof. It is operationally divided into two sections with a common entrance - the art school itself and the concert hall. The first section consists of the office, six classrooms, a room for music theory, a choir room, a storage room, and sanitary facilities. The second section includes the concert hall, gallery, foyer, prep room, and sanitary facilities. The technical equipment of the building is located on the second floor. The building has load-bearing ceramic masonry walls, based on plain concrete foundation strips. The floor and roof structures are designed as cast-in-place reinforced concrete slabs. The partitions design is ceramic masonry units and acoustic plasterboard walls. The facade design combines greenery and ventilated cladding. The design building services include heating with two heat pumps, ventilation and cooling with two air ventilation systems, rainwater management for toilet flushing, artificial lighting, and photovoltaic power plants for the building services. The noise study covers issues of sound insulation of the building structures, reverberation time in selected rooms, and an urban acoustic study. The result is the correct design of the building in terms of acoustic comfort.
|
|
|
Design and Realization of Modification of Acoustic Field in Laboratory
Ješko, Petr ; Rášo, Ondřej (referee) ; Schimmel, Jiří (advisor)
The thesis deals with the problems of closed spaces. It deals with situations where it is necessary to reduce the reverberation time in certain octave bands. It provides procedures comparing conventional method of solving by calculation of the mean sound absorption coefficient of the area and the subsequent experimental addition of acoustic absorbers which occupy different areas and method that uses an acoustic simulation software for the 3D model. It also deals with a concept of Reflection Phase Grating diffuser.
|
|
|
Acoustical measurent in real environment
Mach, Václav ; Mačák, Jaromír (referee) ; Míča, Ivan (advisor)
This bachelor thesis discusses the issue of acoustical measurement. There are dierent signals described, which are used for this purposes, both MLS and esweep, compared their advantages and disadvantages and made some practical demonstrations of impulse response measurement. Furthermore, the fundamentals of reberbation time measurement are described in theory. The practical part of this thesis consists of the measurement application, written in the C++ language and mainly targeted for Linux systems. Qt multiplatform toolkit has been utilized for the GUI part.
|
|
| |
|
|
Primary School
Forman, Daniel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Thesis Theme is a primary school, namely the outbuilding primary school Havlíčkův Brod, Konečná 1884. I suggest first grade pavilion and pavilion with school canteen with kitchens. Pavilions are based on the footings. Pavilions are designed as a two-way system from the wall HELUZ. Construction of ceiling are from ferroconcrete slabs are cross reinforced, single-layer roof is flat with a classic sequence of layers. In addition to construction and process layout I solved also the statics of building in specialize of concrete structures. The following are also evaluated heat and acoustic requirements and requirements for fire safety of buildings. New pavilions are solved as wheelchair accessible. Pavilion of the first grade has two floors with 5 classes of stem, 1 vocational and 2 classes are earmarked for after-school clubs. This pavilion is connected to the connecting neck between the former pavilon A and pavilion B. Dining pavilion has one floor, which is divided in the school canteen and kitchen is connected to the connecting neck leading to the gym. The land is mildly sloping to the south side. All consstructions comply with the applicable standards and recommendations ČSN.
|
|
| |
|
|
"Music Scene" - a concert hall for the city of Brno
Zatloukalová, Veronika ; Marek, Jiří (referee) ; Šindlar, Jiljí (advisor)
The subject of this thesis is the design concept of the architectural study of a concert hall, namely the proposal for a "MUSIC SCENE" - the concert hall for the city of Brno. As part of this study is therefore designed a hall for 591 visitors. Hall enables performances to 90-member orchestra or choir. The solution is also operating and maintenance facilities necessary facilities like auditorium. The main emphasis was put on the acoustic solution, then the overall transparency in the operation of the building and the continuity of the building and the surrounding development mainly to the existing communication system that tries to respect.
|
|
|
Ventilation of a multifunctional house
Husák, Martin ; Rubina, Aleš (referee) ; Rubinová, Olga (advisor)
The bachelor's thesis deals with the design of ventilation equipment and air conditioning for a multifunctional building, which has 4 doctor's offices, a hairdresser, a driving school and 3 residential flats. The house is designed to meet all the necessary requirements regarding ventilation. Air handling units are designed to discharge degraded air to the exterior and bring fresh air back. Thermal comfort for the winter is ensured by radiators and in the summer by air conditioning. The theoretical part is focused on climatic conditions for the design of air conditioners, refrigeration systems and refrigerants.
|
|
|
Sports complex
Touš, Jakub ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The main focus of this thesis is to design the expansion and modernization of a sport complex "U Jezu" for a sport club TJ Roztoky. This thesis is consisted of a study for a territorial agreement. In this study, there are indicated a formation of two playing fields with the artificial surfaces, beach volleyball court proposing two building objects as a base for the entire complex, which consists of garages, storages and a main building. A more detailed design was created for the main building. As the supporting structure of the object, the transverse wall system completed with outdoor columns supporting the cantilevered portion of the ceiling tiles, which are mainly unidirectionally reinforced concrete floor slabs. The supporting structure is based on the strip foundations. The designed building object has two-above ground floors and a ground floor, which will be created by embedding the building object into the hill side. The ground floor is designed for the relaxation and the leisure purposes. Moreover, there is also a technological equipment necessary for the operation of the facility. On the first above ground floor, there are designed locker rooms for athletes, a club room with a kitchen and an accommodation unit for a manager of the complex. The second floor is for the accommodation. There are designed rooms with lounge and office of the president of the sport club. Part of the second floor consists of a terrace. For the roofing, a flat roof with a single-classic sequence of layers is designed. In this thesis, the static is partially solved. Furthermore, the object is evaluated in the terms of lighting, acoustic and thermal requirements as well as requirements for the fire safety of buildings.
|
guest ::
