|
|
Combined Electron Beam Lithography
Krátký, Stanislav ; Mikulík, Petr (referee) ; Škereň,, Marek (referee) ; Kolařík, Vladimír (advisor)
This thesis deals with grayscale e-beam lithography and diffractive optical elements fabrication. Three topics are addressed. The first topic is combined grayscale e-beam lithography. The goal of this task is combining exposures performed by two systems with various beam energies. This combined technique leads to a better usage of both systems because various structures can be more easily prepared by one electron beam energy than by the other. The next topic is the optimization of shape borders of exposing structures that are defined by image input. The influence of such optimization on exposure data preparation is evaluated, as well as the exposure time and the change of optical properties of testing structures. The possibility of deep multilevel diffractive optical element fabrication in plexiglass blocks is researched as the third topic. Plexiglass can replace the system of a resist and a substrate. A new approach to writing down the structures by electron beam is presented, minimizing thermal stress on the plexiglass block during the exposure. The writing method also improves the homogeneity of exposed motifs. A method for computing the exposure dose for specific multilevel structures was designed. This method is based on the existing model of proximity effect computation and it minimizes the computing time necessary to obtain the exposure doses.
|
|
|
Structure and properties of physically foamed polymer nanocomposites
Kotoučková, Simona ; Ondreáš, František (referee) ; Lepcio, Petr (advisor)
This work deals with physically foamed polymer nanocomposites. The theoretical part of the thesis deals with various possibilities of preparation of polymer foams. Another important problematics on which the theoretical part focuses is the ability to control the spatial organization of nanoparticles in a polymer matrix. For the experimental part, polymethyl methacrylate (PMMA) was used as a model system, and it is assumed that it will be possible to based on the obtained conclusions on research in more complicated systems with a wider practical application potential such as polypropylene impact-copolymer (ICPP). The experimental part focuses on optimalization of the process of preparing nanocomposite foam. The object of optimization is to determine the appropriate saturation time when maximum carbon dioxide saturation is achieved under a given pressure. The effect of nanoparticles on the process of saturation and foaming was analyzed by comparing nanocomposites with the preparation of pure polymer foams. On the prepared foam samples, the shape stability during foaming and the dimensional stability after foaming at elevated temperature were evaluated. The effect of nanoparticles on the resulting structure of porous material was evaluated. This effect was demonstrated by the preparation and evaluation of acquired SEM images of a laminar structure sample containing a composite and a pure polymer layer.
|
|
|
Testing of a transparent model of a pressure-swirl nozzle
Sapík, Marcel ; Pech, Ondřej (referee) ; Jedelský, Jan (advisor)
The aim of the thesis is to put a transparent scaled PMMA model of the pressure swirl nozzle into operation, which includes, the selection of working fluids and the preparation of a test set to allow measurements using optical methods (LDA, PDA, PIV, high-speed visualization). The theoretical part describes the basic theory of atomization, optical measurement methods and deals with the problems of optical transition in optically complex systems. It also includes an extensive search for transparent liquids and materials of enlarged models that have been used in experiments, which often aim to match light refractive indices between these materials. In the practical part, attention is paid to the preparation of the test set and tests of chemical effects of several selected liquids on PMMA material are conducted, including a summary of experience with their use, as there was a permanent damage to the material. Several LDA measurements followed, using kerosene, p-cymene, 1-bromonaphthalene and water, evaluated the effect of the refractive index difference on the results. It turned out that no observable influence occurred if the refractive index difference between the nozzle material and the liquid was small. In addition, a visualization of internal flow through a high-speed camera was made. The practical part closes the static pressure measurement in the nozzle chamber, where the pressure ratio was measured on the walls of the chamber as well as on its axis. The measurement confirmed that the pressure on the chamber walls is constant and varies with the distance from the chamber axis.
|
|
|
Thermoplastic composites for automotive applications
Zbončák, Marek ; Pospíšil,, Ladislav (referee) ; Jančář, Josef (advisor)
Diplomová práca sa zaoberá prípravou teromplastických kompzoitov s PMMA a PC matricou s potenciálnym využitím v automobilovom priemysle. Ako výstuž boli použité krátke sklenené, uhlíkové a PBO (poly(p-fenylén benzobisoxazol)) vlákna známe pod obchodným názvom Zylon®. Práve do PBO vlákien boli vkladané veľké nádeje vzhľadom na ich ohromujúce mechanické vlastnosti. Vplyv objemového zlomku vlákien na modulu pružnosti, pevnosť a ťažnosť kompozitov bol skúmaný. Experimentálne zistený modul pružností bol porovnaný so semi-empirickým Halpin-Tsai modelom. Prídavok sklenených a uhlíkových vlákien viedol k značnému zvýšeniu modulu pružnosti. Ukázalo sa, že po istej hodnote objemového zlomku dochádza k poklesu pevností kompozitov v dôsledku zvyšujúceho sa počtu defektov. Prídavok PBO vlákien preukázal len nepatrný vystužujúci efekt. Viskoelastické vlastností kompozitov boli skúmané pomocou dynamicko mechanickej analýzy (DMA). Termogravimetrická analýza (TGA), konfokálna laserová rastrovacia mikroskopia (CLSM) a rastrovacia elektrónová mikroskopia (SEM) boli využité k štúdiu štruktúry kompozitov.
|
|
|
Stress-strain analysis of skull implant
Hřičiště, Michal ; Borák, Libor (referee) ; Marcián, Petr (advisor)
Lebeční implantáty se používají jako náhrady částí lebečních kosti, které v důsledku zranění nebo nemoci ztratili svou funkci. Důležitým faktorem, který ovlivňuje funkci celé soustavy implantátu, jsou jeho mechanické projevy. Tato práce stručně shrnuje současné znalosti v oblasti rekonstrukce lebečních defektů a popisuje srovnání různých tvarů stěn implantátu vytvořených z různých materiálů, na základě deformační napěťové analýzy modelu neurocrania s umístěným implantátem, zatíženým nitrolebečním tlakem a vnějším zatížením.
|
|
|
Effect of adding multidirectional oriented fibers on mechanical properties of denture base resin
Kolářová, Eva ; Poláček, Petr (referee) ; Pavelka,, Vladimír (advisor)
Tato Diplomová práce se zabývá vlivem vyztužení na mechanické vlastnosti materiálu pro přípravu snímatelných náhrad. Pro testování byly použity tři sady vzorků: PMMA pryskyřice, PMMA pryskyřice s Dentapreg Mesh výztuží a PMMA pryskyřice vyztužena zesilující síťkou z nerezové oceli.Pro měření chování vzorků při statickém a dynamickém namáhání byl použit třibodový ohybový test a Charpy rázové kladivo. Viskoelastické vlastnostzi byly měřeny dynamicko-mechanickou analýzou (DMA). Skenovací elektronová mikroskopie (SEM) byla použita k charakterizaci lomových ploch. Během statického namáhání vzorků výztuž nehraje důležitou roli v porovnání s nevyztuženou pryskyřicí. Nicméně byl pozorován opačný trend při dymanickém namáhání, kde efekt výzruže rostl v řadě PMMA pryskyřice – síťka z nerezové oceli – Dentapreg Mesh.
|
|
|
Combined Electron Beam Lithography
Krátký, Stanislav ; Mikulík, Petr (referee) ; Škereň,, Marek (referee) ; Kolařík, Vladimír (advisor)
This thesis deals with grayscale e-beam lithography and diffractive optical elements fabrication. Three topics are addressed. The first topic is combined grayscale e-beam lithography. The goal of this task is combining exposures performed by two systems with various beam energies. This combined technique leads to a better usage of both systems because various structures can be more easily prepared by one electron beam energy than by the other. The next topic is the optimization of shape borders of exposing structures that are defined by image input. The influence of such optimization on exposure data preparation is evaluated, as well as the exposure time and the change of optical properties of testing structures. The possibility of deep multilevel diffractive optical element fabrication in plexiglass blocks is researched as the third topic. Plexiglass can replace the system of a resist and a substrate. A new approach to writing down the structures by electron beam is presented, minimizing thermal stress on the plexiglass block during the exposure. The writing method also improves the homogeneity of exposed motifs. A method for computing the exposure dose for specific multilevel structures was designed. This method is based on the existing model of proximity effect computation and it minimizes the computing time necessary to obtain the exposure doses.
|
|
|
Návrh konferenčního stolku
Krenarová, Eliška
This diploma thesis focuses on the design of a coffee table, which is further designated for custom-made or mass production and sale. The thesis is divided into theoretical and practical part. The theoretical part serves as a basis for the practical part as it documents the history of coffee tables and the research of coffee tables in the current market. The practical part presents the actual design process of the particular coffee table starting from the idea, first sketches, the selection of the materials and construction to the visualization of the product, the technical drawing and the budget for the production. This part also takes into account the observations from the theoretical part and tries to apply them in the design.
|
|
|
Functional foams with densit ygradient
Svatík, Juraj ; Figalla, Silvestr (referee) ; Jančář, Josef (advisor)
Vycházíme-li z lehčených přírodních materiálů, lze od porézních materiálů s gradientem porozity očekávat mechanické vlastnosti nadřazené konvenčím polymerním pěnám, a to díky jejich specifické architektuře. Tyto vlastnosti umožňují použití lehčených materiálů jako strukturních prvků. V této práci je popsaná příprava gradientních porézních materiálů pomocí laminování a/nebo 3D tisku. Provedeny byly statické a dynamické mechanické testy na obou kvazi homogenních a gradientně porézních pěnách poskytující experimentální podklad pro hypotézu deformační odezvy plynoucí ze strukturní architektury. Data se interpretovala užitím zavedených teoretických modelů. Naše výsledky vedly k závěru, že tyto teoretické modely odvozené od pěn s pravidelnou strukturou není vhodné aplikovat pro pěny s gradientem porozity, protože prokazují podstatně lepší mechanické vlastnosti než homogenně porézní pěny.
|
|
|
Structure and properties of physically foamed polymer nanocomposites
Kotoučková, Simona ; Ondreáš, František (referee) ; Lepcio, Petr (advisor)
This work deals with physically foamed polymer nanocomposites. The theoretical part of the thesis deals with various possibilities of preparation of polymer foams. Another important problematics on which the theoretical part focuses is the ability to control the spatial organization of nanoparticles in a polymer matrix. For the experimental part, polymethyl methacrylate (PMMA) was used as a model system, and it is assumed that it will be possible to based on the obtained conclusions on research in more complicated systems with a wider practical application potential such as polypropylene impact-copolymer (ICPP). The experimental part focuses on optimalization of the process of preparing nanocomposite foam. The object of optimization is to determine the appropriate saturation time when maximum carbon dioxide saturation is achieved under a given pressure. The effect of nanoparticles on the process of saturation and foaming was analyzed by comparing nanocomposites with the preparation of pure polymer foams. On the prepared foam samples, the shape stability during foaming and the dimensional stability after foaming at elevated temperature were evaluated. The effect of nanoparticles on the resulting structure of porous material was evaluated. This effect was demonstrated by the preparation and evaluation of acquired SEM images of a laminar structure sample containing a composite and a pure polymer layer.
|
guest ::
