|
|
GENERATIVE FURNITURE
Picek, Matěj ; Krejčí, Daniel (referee) ; Tobola, Ondřej (advisor)
This thesis deals with the basic principles of the functioning of the technology of generative design, using the method of topology optimization and finding their potential with the capabilities of the application in the field of furniture design. The main outcome is a functional prototype of a low relaxing chair, which specific construction is designed using the method of topology optimization.
|
|
|
Optimization of Inventory
PROKOPOVÁ, Nikola
The subject of this thesis is optimization of inventory in selected organization. Inventory optimization is a very important topic in each organization because it reduces storage costs. At the beginning the inventory theory is presented. It shows the meaning and types of inventory, inventory control and also different methods and models of inventory control. Inventory optimization in the enterprise can be reached by using models of inventory control. In the second part the company on which is applied the analysis of various mathematical and statistical methods is presented. Specifically ABC analysis where the individual components of inventory are divided into groups according to the importance. EOQ model which serves to minimise the cost of supply and tries to optimise the time cycle of the supply. Safety stock ensures the smooth running of the production and covers the extraordinary fluctuations between deliveries. At the end these methods are compared and evaluated.
|
|
|
Optimization of a small induction machine’s slots
Šišák, David ; Janda, Marcel (referee) ; Mach, Martin (advisor)
This master thesis deals with optimization of the shape of the stator and rotor slots of induction motor with focusing on increasing efficiency. The theoretical part introduces the principles of optimization algorithms. Another part is devoted to design the shape of slots and its influence on the shape of slots on machine. On the models of motor was conducted the optimized shape of slots by using a genetic algorithm. Firstly, it was performed by using the analytical calculation in the RMxprt program, then by using the finite element method on two different models, whose difference simulates the influence of the production technology on the efficiency of the motor. Laboratory measurement was made on a real machine as well. The results of the measurement, calculations and optimizations are compared in the work.
|
|
|
Optimization of concrete structures using stochastic optimization methods
Slowik, Ondřej ; Pukl,, Radomír (referee) ; Novák, Drahomír (advisor)
The thesis focuses the reader on the sense of optimization and its importance for civil engineering. It outlines the principles used by some optimization methods and discusses the possibility of combination of any type of methods LHS with other optimization method. The result is a new type of optimization method named Nested LHS described in the text of the third chapter. The fifth chapter applies some of the lessons learned to solve practical optimization problem - reinforced concrete bridge solved by nonlinear finite element analysis using pseudostochastic optimization method LHS mean.
|
|
|
Establishment of cutting conditions for selected aircraft parts
Baron, Yoann ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Tato práce obsahuje přehled superslitin na bázi niklu, jejich obrábění za vysokého tlaku chladicí kapaliny, týká se také metod optimalizace pro tento typ obrábění a následné analýzy opotřebení nástroje. Tato studie byla vytvořena ve spolupráci se společností Safran, experimentální část byla zrealizována ve výrobním závodě Evry-Corbeil ve Francii. Experimentální část práce se týká optimalizace řezných podmínek pro vnitřní hrubovací soustružení součástí pro letecký průmysl za vysokého tlaku chladicí kapaliny. Cíle práce byly následující: srovnání rozdílných vyměnitelných břitových destiček dodaných společností Safran, návrh hrubovacích strategií a určení optimálních podmínek pro každou z vybraných strategií. Byly uvažovány dvě rozdílné strategie: soustružení s konstantním posuvem a šířkou záběru ostří a tzv. „ramping“. Pro každou ze strategií byla provedena operace čelního a podélného soustružení. Výsledky byly porovnány na základě ekonomického a produktivního kritéria.
|
|
|
Design Optimization of Contact Force Vector Sensor
Vála, Pavel ; Vlach, Radek (referee) ; Krejčí, Petr (advisor)
The aim of this work is an optimalization of vector contact force sensor properties which prototype is at the moment designed. The principle of sensor is based on transformation active part of sensor using three tensiometers and following value indentification of loading force vector using neuron network. Sensor has a bad sensitivity when axis force load or near to axis of sensor. To solve this problem ''MKP'' model of sensor was used on which suitable optimalization method was applicated. From the result of optimalization modificated sensor will be proposed and will be made a utility verification using neuron network.
|
|
|
Reliability-based structural optimization
Slowik, Ondřej ; Pukl, Radomír (referee) ; Novák, Drahomír (advisor)
This thesis presents the reader the importance of optimization and probabilistic assessment of structures for civil engineering problems. Chapter 2 further investigates the combination between previously proposed optimization techniques and probabilistic assessment in the form of optimization constraints. Academic software has been developed for the purposes of demonstrating the effectiveness of the suggested methods and their statistical testing. 3th chapter summarizes the results of testing previously described optimization method (called Aimed Multilevel Sampling), including a comparison with other optimization techniques. In the final part of the thesis, described procedures have been demonstrated on the selected optimization and reliability problems. The methods described in text represents engineering approach to optimization problems and aims to introduce a simple and transparent optimization algorithm, which could serve to the practical engineering purposes.
|
|
|
Molecular Signature as Optima of Multi-Objective Function with Applications to Prediction in Oncogenomics
Aligerová, Zuzana ; Maděránková, Denisa (referee) ; Provazník, Ivo (advisor)
Náplní této práce je teoretický úvod a následné praktické zpracování tématu Molekulární signatura jako optimální multi-objektivní funkce s aplikací v predikci v onkogenomice. Úvodní kapitoly jsou zaměřeny na téma rakovina, zejména pak rakovina prsu a její podtyp triple negativní rakovinu prsu. Následuje literární přehled z oblasti optimalizačních metod, zejména se zaměřením na metaheuristické metody a problematiku strojového učení. Část se odkazuje na onkogenomiku a principy microarray a také na statistiku a s důrazem na výpočet p-hodnoty a bimodálního indexu. Praktická část je pak zaměřena na konkrétní průběh výzkumu a nalezené závěry, vedoucí k dalším krokům výzkumu. Implementace vybraných metod byla provedena v programech Matlab a R, s využitím dalších programovacích jazyků a to konkrétně programů Java a Python.
|
|
|
Optimization of EMI filter Circuitry
Surovec, Vojtěch ; Soldán, Josef (referee) ; Dřínovský, Jiří (advisor)
In introduction of work, I presented the state of the art of measuring insertion loss of the EMI filter and the description of individual methods of measuring is also included. After that I dealt with global optimization methods and some of them I theoretically described. Mainly PSO method was studied carefully, and the principle of optimization in details are presented in the thesis, because this method was used for optimization of the filters parameters in the thesis. Next part of work deals with theoretical and mathematical expression of insertion loss of the EMI filters. Due to the mathematical expression of the insertion loss, the values of parasitic elements of given filter have been optimized in different measuring systems. This optimization was applied on synthetic data. By this step the functionality of optimization was proved and also the fitness function has been tuned and optimised. The last part of thesis works with optimization on measured data of given filters. I found out inaccuracy in mathematical expression of given model of EMI filter, therefore it was necessary to come up with the new filter model. The accuracy increases by using the new filter model. In next step the new model was enlarged by new spurious components.
|
|
| |
guest ::
