|
|
The influence of cobalt additive on parameters of positive electrode for Ni-Cd accumulators
Svoboda, Michal ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
The Master´s thesis deals with description of the influence of cobalt additive on positive electrode parameters for Ni-Cd accumulators. Trough the use of Electrochemical Quartz Crystal Microbalance are analysed the effects which decline effective life of positive electrode during accelerated cycling. Theoretical part describes important characteristics of Ni-Cd accumulators, the working principle and effects which are in progress on positive electrode during cycling. The next part deals with description of system EQCM and the pricnciples of doping active mass with cobalt additive. Practical part consists of EQCM system calibration and electrochemical measurements. The principal aim is detection of the influence of cobalt additve on active mass during cycling in different electrolytes. From the results of measurements is set the optimal amount of cobalt additive.
|
|
| |
|
|
Intelligent lightning system
Harman, Ján ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
The aim of my master’s thesis is a system for control of the light intensity. It is electronic equipment which controls the intensity of the light circuits based on settings and input signals. This equipment could work on single-phase systems or multiphase systems. The equipment is controlled by the signal DMX-512 which is a standard for the control of lighting technologies. The set up of this equipment is based on a personal computer or in a limited form by a small connected display.
|
|
|
Methods of Accurate Measurement of Low Impedances
Mašláň, Stanislav ; Sedláček,, Radek (referee) ; Bilík, Petr (referee) ; Beneš, Petr (advisor)
Overall topic of presented thesis is development of methods of measurement of low impedances below 10 Ohm in a frequency range up to 1 MHz. The thesis comprises of three main parts. First part of thesis describes design of unique and simple calculable standards of resistance that are used for calibration of the bridge and as the reference standards for the calibrations. Next part of theses is focused on design of digital sampling bridge in various topologies suitable for measurement of various types of impedance standards up to frequency of 1 MHz. The thesis describes the HW components, data processing and corrections scheme allowing the designed bridge to reach expanded uncertainties (k=2) below 0.005% and 250 µrad at 1 MHz. One of the key points of the proposed corrections scheme is unique automatic linearity calibration method requiring minimal operator's effort. The theses also describes integration of Spice model of the bridge the bridge SW that allowed validation of functionality of the bridge and also analysis of uncertainty contributions related to interferences between the bridge components. The last part of the thesis shows selection of measurements of known impedances and international comparisons that proofs performance of the bridge.
|
|
| |
|
| |
|
|
Methods of Accurate Measurement of Low Impedances
Mašláň, Stanislav ; Sedláček,, Radek (referee) ; Bilík, Petr (referee) ; Beneš, Petr (advisor)
Overall topic of presented thesis is development of methods of measurement of low impedances below 10 Ohm in a frequency range up to 1 MHz. The thesis comprises of three main parts. First part of thesis describes design of unique and simple calculable standards of resistance that are used for calibration of the bridge and as the reference standards for the calibrations. Next part of theses is focused on design of digital sampling bridge in various topologies suitable for measurement of various types of impedance standards up to frequency of 1 MHz. The thesis describes the HW components, data processing and corrections scheme allowing the designed bridge to reach expanded uncertainties (k=2) below 0.005% and 250 µrad at 1 MHz. One of the key points of the proposed corrections scheme is unique automatic linearity calibration method requiring minimal operator's effort. The theses also describes integration of Spice model of the bridge the bridge SW that allowed validation of functionality of the bridge and also analysis of uncertainty contributions related to interferences between the bridge components. The last part of the thesis shows selection of measurements of known impedances and international comparisons that proofs performance of the bridge.
|
|
|
Plethysmography for retinal video processing
Plavcová, Daniela ; Valterová, Eva (referee) ; Kolář, Radim (advisor)
Sight is one of the five human senses and is very important for exploring near and far surroundings. However, this is prevented by various eye defects, which may be related to the vascular system of the retina and the pulsations that are observable on it. This work deals with the study of the relationship between the mentioned pulsations and glaucoma. To search for connections between these two aspects, video recordings from the retina are used, the pulsation of which is further worked in the form of a 1D signal, especially in the spectral region.
|
|
|
Laboratory equipment aimed on the all-pass filters
Lokaj, Jakub ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
Theme of bachelor thesis is design and realisation of allpass filters. It consists of using pasive and active components in design of allpass filters and followed by realisation in laboratory equipment. Functionality was verified in simulating software LTspice and SNAP3v2. In real implementation were used integrated circuits such as TL071, AD844 and LT1228 for CCII+, OTA and design with op-amp. This bachelor thesis includes concept of laboratory equipment, where will be compared functionality of allpass filters with simulated results
|
|
|
Economic and Organizational Aspects of Introducing Electronic Registration of Sales
BARTŮŇKOVÁ, Kristina
The work contains of the point of legislation, explains definitions of terms, a clarification of the reason and purpose of accepting this measure. The thesis states progress chart its establishment, responsibilities for entrepreneurs, possible ways of technical solution, three stages of Electronic Registration of Sales and evaluation of the implemented first stage. The bachelor thesis targets the specific companies on which the process of implementation, organizational arrangements and economic consequences of Electronic Registration of Sales for subject of economic activities are described. There are mentioned two other aims in the work. The first of them is to quantify costs of implantation of Electronic Registration of Sales module into specific accounting softwares. The second aim is to compare opinions of specific professional chambers and associations.
|
guest ::
