|
|
Design and construction of a simple music synthesizer
Ondryáš, Radek ; Čudek, Pavel (referee) ; Čech, Ondřej (advisor)
This paper deals with the topic of synthesizers. The first part of the paper provides a general description of synthesizers, their history, types, and important components. The next part of this paper focuses on sound generator chip Texas Instruments SN76477, specifically it’s functionality and ways of controlling its functions. The main part of this paper is designing and creating a synthesizer around the SN76477 sound chip and creating a box for the synthesizer from laser cut plywood.
|
|
|
Influence of Bottom Preheating in Rework of Assembled PCB
Čechák, Ondřej ; Bžoněk, Tomáš (referee) ; Starý, Jiří (advisor)
This bachelor's thesis introduces the problematics of physical mechanisms of heat transfer and the correlative mathematical formulas and the use of mentioned problematics in the technology of bottom preheating in the rework of assembled printed circuit boards. It explains the importance and reasons of use of this technology, not merely in the professional production. It focuses on expert analysis of the appliances based on their properties and clarifies the differences in basic types of the devices. The emphasis is then laid on a practical testing of the technical parameters of the preheating devices as well as on an experimental design and a practical testing of a local bottom printed circuit board preheater.
|
|
|
Flux Residues after Reflow Soldering
Uhlář, Vít ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The aim of this bachelor thesis is to solve flux residue characteristics on PCBś after reflow soldering and compare different solder pastes. The first part deals with the issue of solder paste application and flux residues. The second part focuses on the process of reflow soldering. The third part is devoted to the measurement methodology of flux residues. Finally, project is a practical part, which is summarized in the production of test samples and contains measurement results.
|
|
|
Narrow-band PLC modem
Skala, Milan ; Krajsa, Ondřej (referee) ; Mišurec, Jiří (advisor)
This bachelor's thesis deals with narrow band PLC modem for 230/400 V power line. In the first chapter we can find basic theory about using modulation, interference, impedance of line, communication, capacitive and inductive coupler. Next chapter deals with design and simulation of capacitive coupler, transceiver circuit, receiver circuit, power supply and circuit for modem synchronization with power line frequency. In this chapter we can find information about building a converter from UART to USB. Third chapter of this thesis is dedicated to designing the printed circuit board and building the modem. Last chapter deals with setting the modem switches, description of its inputs and outputs and basic manual for the modem's software.
|
|
|
Device for automatic measurement of volt-ampere characteristics
Ondráček, Petr ; Vrba, Kamil (referee) ; Lattenberg, Ivo (advisor)
The Master's thesis discusses the design and realization of electronic meter of volt-ampere characteristics using Wifi module ESP32. The device is designed to be able to measure the characteristic in the voltage range of +/- 20 V and current range of +/- 200 mA. The device is controlled by web interface. The user is able to connect to it with for example his or her smartphone. This interface enables the user to configure various parameters, including the range of measurement and the power restriction. Furthermore, it is possible to graphically display the measured characteristic and export the data. To be independent on the outer network, the ESP32 is operated as an access point, which is creating a new simple network without the internet connection. In the Master's thesis, the principle of voltage and current measurement is explained theoretically, the circuit connection of device and the printed circuit board are designed and the cover of the device is modeled. Also the process of creating the device according to the design is described and the cover of the device is printed on 3D printer. After that, the control program is designed, described and uploaded into the resulting device. Finally, the functionality of the device is tested by measuring the volt-ampere characteristics of a few components.
|
|
|
GSM Module for FITkit Platform
Holinka, Milan ; Šimek, Václav (referee) ; Bartoš, Pavel (advisor)
Educational platform FITkit has plenty options of communication. Interfaces, that are not implemented on the main board of the kit, accuring regularly in the form of external modules or controllers realized in FPGA. The aim of this work is to extend the capabilities of FITkit platform about the possibility of using a GSM network via accessory module. Describes the design, composition and activation of this module, creation a library for its handling and demonstration its activities on the sample application. Finished device can transmit and receive SMS messages and connecting voice calls.
|
|
|
Automated Closing System based on Lighting Conditions
Hajný, Stanislav ; Krajsa, Ondřej (referee) ; Hošek, Jiří (advisor)
The bachelor’s thesis deals with the design and implementation of automated doors based on lighting conditions. The ESP32 module is used as the main computing unit. The final design consists of a power supply part and a computing part. The first part describes the theory of IoT and solar systems. Next, the individual subcomponents are described. The next part deals with the design of the device and the last describes the final implementation and results.
|
|
|
Lighting unit for PCB production
Hybler, Matěj ; Harabiš, Vratislav (referee) ; Balogh, Jaroslav (advisor)
The thesis deals with the design of microcontroller driven lighting unit for the printed circuit board creation, using exposure of the applied layer of the photoresistive material. Main part is dedicated to design of the control unit, which can be operated either in automatic or manual mode, then its source code for microcontroller written in C language and the selection of suitable source of UV radiation. It also describes the design of the entire device, methods and results of individual measurements to determine the achievable quality of the resulting PCB.
|
|
|
Basic measurement of bipolar and unipolar transistor
Kaňa, Leoš ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
In terms of the better effectiveness in the sphere of transistor characteristics measuring, no matter unipolar (FET) or bipolar (BJT), in laboratory conditions and their better understanding in terms of thrash out a subject matter is desirable have to available workplace let us say preparation enabling this kind of measuring with modifiability wiring and with possibility to change measured component. This thesis isn‘t focused only on development of this kind of universal component for measuring but simultaneously contains brief summary about the theory and parameters of transistors. Next aim is the development and realisation of static characteristic measuring program in VEE 8.0 Pro environment. Finally the complex laboratory exercise has to be done for measuring of bipolar and unipolar transistor’s static characteristics include programs for automatic measuring. For developing of DPS was used developing system named Eagle which gives us instrument with sufficiently accuracy. In thesis is contained theory needed for measuring and programming. Except possibility of measured component change we can change transistor connection in circuit on the board. This change is available for BJT (CE, CB, CC) and unipolar JFET (CS, CG, CD) transistor’s.
|
|
|
Design of switch-mode audio power amplifier
Macek, Libor ; Petržela, Jiří (referee) ; Brančík, Lubomír (advisor)
This paper is divided into four parts. The first part deals with the description and explanation of the general principles of switching concept amplifiers. The second part is occupied with design of Class-D amplifier, a description of each block and calculations. A significant part of proposal of amplifier is based on simulations from programs Pspice and Filter Free. In the third part deign of power unit is discussed. The last part is focused on the measurement results on a prototype device.
|
guest ::
