|
|
Inovation of measurement equipment used for analyzing of photovoltaick cells
Otépka, Jakub ; Bača, Petr (referee) ; Vaněk, Jiří (advisor)
This bachelor thesis deals with the design of a tachometer which is used to measure and display of mechanical aperture speed of a measuring equipment for the defect analysis of solar cells using the photoluminescence method. This work is divided into three parts. The first section describes the principle of solar cells, the principle of luminescence radiation and its types. Next the defects of solar cells are analyzed. The second part discusses the theory of tachometers, the principles and methods of loading pulses. The third part is then analyzed the design and construction of the selected type tachometer.
|
|
|
Wettability of PCB Surface Finishes and Comparison of Methods
Vídeňský, Ondřej ; Přikryl, Tomáš (referee) ; Starý, Jiří (advisor)
This bachelor´s thesis deals with testing methods for surface finishe´s wettability PCB. For this tests has been designed and created testing board which contains testing coupons for testing methods. Boards have been created and covered by surface finishes by Gatema Boskovice. In this thesis electroless nickel with immersion gold (ENIG) and immersion tin have been tested. For simulation of reflow soldering have been used test methods solder indicator, solder spread test and dewetting test. Wetting balance test method has been used as simulation of wave soldering.
|
|
|
Manufacture of massive castings and their defects
Doležal, Petr ; Martínek, Ludvík (referee) ; Záděra, Antonín (advisor)
Object of this master’s thesis is accomplished analyze the range of foundry of steel ŽĎAS a.s., Zdar nad Sazavou and make the type massive steel castings and analysis of existing technology foundry and metallurgical defect. The beginning of this master’s thesis is dedicated to the manufacturing of steel foundries range ŽĎAS a.s., Zdar nad Sazavou. The following section is devoted to manufacturing technologies for the production of massive steel castings. In the final part of this thesis are described metallurgical and foundry defects of the typical castings of steel foundry and proposals to eliminate these undesirable defects. End thesis includes a summary of the results and trends in the development of research in the production of massive steel casting.
|
|
|
Investment casting - defects list
Šmatelka, Jakub ; Staňková, Markéta (referee) ; Mikulka, Vít (advisor)
This bachelor thesis deals with defects which can occurred during investment casting process. In the first part, there is briefly described investment casting process in Alucast s.r.o. company. List of all defects occurring during manufacture is described in the second part. This catalog includes majority of defects from the cast proposal to finishing operations. There are also described causes, consequences and corrective actions.
|
|
|
Reduction in House Prices due to Humidity
Ocásek, Petr ; Šmahel, Milan (referee) ; Weigel, Lubomír (advisor)
Diploma work "Problems of house price reduction due to defects manifested with damp" deals with the issue of property valuation and subsequent sale of the defect. The first chapter describes valuation and other important factors relating to the Act valuation. The second chapter deals with the necessary documentation for property valuation and basic terminology. The third section deals with defects that could occur in the residential building as well as their possible correction. Another part of this work is focused on the actual valuation of the object to a defect with property damage and the last chapter deals with the actual real estate market and the subsequent sale of such property with the defect. The attachments of the case study is then focused on the valuation of the house and without defects and possible solutions and proposed procedures for sale.
|
|
|
Economic characteristics of the life cycle of building
Aigel, Petr ; Tichá, Alena (advisor)
Economic characteristics of building in the life cycle of the building work is a very broad topic. Captures economic part and associated technical part idem. Also, the life cycle of building work is very broad, a great many aspects and bearings enters into and influences the work. Excepting costs and prices of acquisition and maintenance of the works is necessary to observe quality of work performing. Both the materials used part and in terms of quality of each facture. This affects the amount of costs that may arise on the part of such unnecessary and degrading work as an entirety. This work attempts to describe all these aspects and influences, classify and appropriately use to monitoring of the works. All findings are tested on the building work - family house. The cornerstone is to find a suitable way of sorting accompanying work throughout its life cycle, allowing us to track costs and prices incurred on it. The conclusion consists answering questions and hypothesis exposed in the work.
|
|
|
Passportisation of the Structural and Technical Condition of a House in Vyskov
Karásek, Jakub ; Doležalová, Monika (referee) ; Kosová, Jaroslava (advisor)
In this thesis I deal with the passportization of the building-technical condition of the family house in Vyškov, the creation of its new project documentation and the proposal of repairs including appraisal cost. In the theoretical part I describe possible faults and defects of buildings, also their lifetime and the possibilities of finding their construction-technical condition. I also discuss the theory and usefulness of pasportizations. In the practical part, I evaluate the construction and technical condition of the selected house and make a finding of faults and defects of the structures, including the proposal for their repair and the appraisal cost with the item budget.
|
|
|
Diagnostic methods for the evaluation of the state of timber structures
Dvořáčková, Soňa ; Anton, Ondřej (referee) ; Heřmánková, Věra (advisor)
This Bachelor´s thesis is focused on diagnostics methods which are destructive, semidestructive and non-destructive. Thanks to these methods, we find out features and characteristics of the material. In the thesis, there is performed diagnostic measurement on a wooden beam and comparing of the results from the method of thorn resistance placement and the results from wood strength measured along the grain. At the end of the thesis there are mentioned statistics calculations.
|
|
|
Diagnostic of photovoltaic cells by LBIV
Sládek, František ; Jandová, Kristýna (referee) ; Vaněk, Jiří (advisor)
This dissertation main point is to take up with fotovoltanic cells metering methods. Dissertation work dwells with the most common defects rising during the fotovoltanic cells manufacturing. Also, there is a diagnosis workshop proposal and realisation. Workshop uses the Light Beam Inducted Voltages (LBIV) method. By the help of this method, fotovoltanic cells structures are analised and compared to the Light Beam Inducted Current (LBIC).
|
|
|
Low volume roads
Kučera, Vlastimil ; Stehlík, Dušan (referee) ; Hýzl, Petr (advisor)
Thesis deals with an issue of low-volume roads and brings basic informations about their design. The most of the low-volume roads in the world are unpaved roads, while in the Czech republic there are not enought of experience with their construction, therefore a foreign literature was used as an almost exclusive source. The advantages of the roads with unpaved materials are, they are environment-friendly and money saving, therefore when correct procedure is used, good quality material is chosen and proper maintenance is used, they are advisable alternative to normally used asphalt surfaces. With increasing volume of vehicles their advantages decreases. They are suitable for a road surfaces in protected landscape areas, because they represents minor impact on the landscape.
|
guest ::
