|
|
Apartment building with cafe
Oujezdská, Lenka ; Pobucká, Slávka (referee) ; Utíkalová, Ivana (advisor)
The subject of the bachelor's thesis is the processing of documents and project documentation in the scope of PCB for an apartment building with a cafe with almost zero energy consumption. The apartment building will be located in the town of Slavkov u Brna, in the Zelnice II district. The project will address the layout of the apartment building, individual apartments and storage space for these apartments. Furthermore, the design of the foundation structure and ceiling structure of individual floors and the calculation of the staircase of individual floors will be processed. The design will also include a flat roof solution, structural composition and fire safety solutions.
|
|
|
Apartment house with hairdresser´s in Vyškov
Volková, Markéta ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with documentation of an apartment building with hairdressing salon project, found in Vyškov. The apartment has partial basement, main entrance from the north side of the building, and irregular, double rectangle-based shape. Near the main entrance is located bike storage room. Parlor is in the first floor above ground, and has separate entrance located on the north side. Building is located on slightly sloping terrain in which it is partially embedded. It also has five above ground floors, with one floor below ground, and is covered with a partially walkable flat roof. Basement consist of a cellar rooms, utility room and a workroom. Inside above ground floors are residential areas made from fourteen dwelling units, while one dwelling unit in the first floor is wheelchair accessible. The building is designed from Porotherm, a single masonry system. Thermal insulation of the building is carried out by contact insulation system. The horizontal structures are made of Spiroll ceiling panels.
|
|
|
Kopřivnice – Housing along Kopřivnička
Kóňová, Patrícia ; Mašek, Radomír (referee) ; Marek, Jiří (advisor)
The prefabricated apartment buildings are on the west bank of the river and family houses on the east bank of the river. On the east side there are private areas of family houses and on the west side there are prefabricated buildings with poor quality public spaces. There is only the anonymity of the city, isolation and a lack of human dimension. My concept solves the problem of combining two opposing approaches. It emphasizes neighborly relations in the form of community and the development of community thinking. What should urbanism that unites people look like?
|
|
|
Residential Building
Lacina, Jakub ; Janovský, Jaroslav (referee) ; Brukner, Bohuslav (advisor)
The bachelor thesis deals with new residential building with a pharmacy and is processed as project documentation. The building is located on the Rybnické suburbs in Jindřichův Hradec town, street Landfrasova, the plot number 3526/61. The building has 4 floors and no basement. On the 1st floor there is a pharmacy type A, then building technical facilities and storage flats. In the other three floors with a total of 6 residential units of two types namely 2 + kk and 3 + kk. The last fourth floor is designed as a loft. The building is designed in the longitudinal wall support system, a complex system POROTHERM. Ceiling designs as well. The roof is designed as a hipped concrete tiles with wooden support system at two levels.
|
|
|
Apartment building
Kafka, Jakub ; Žajdlík, Tomáš (referee) ; Čupr, Karel (advisor)
The bachelor thesis deals with the project of an apartment house with grocery store in Brno-Sadova. The building is partially situated under the ground, has got a shape of letter L and is covered with single-layer flat roof. The house has got 20 dwelling units. The semi-basement consists of a cellar cubicles, bicycle room, drying room and technical room with heat exchanger. There is a workshop in the first floor which is separated from dwelling units, therefore it has its own entrance. The underground part is designed from concrete blocks BEST that are also filled with concrete. The aboveground part is designed from single masonry system and insulated with contact insulating system. Vertical constructions are made from ceramic blocks Porotherm and the ceiling is made from beams and liners of Miako brand. There is an elevator designed in the building.
|
|
|
Comparison of normal prices of dwelling units in Pardubice and Hradec Králové
Hromádko, Vojtěch ; Lorencová, Marie (referee) ; Pertl, Marek (advisor)
This master's diploma thesis discusses the topic of a normal price for a dwelling unit, located specifically in the urban area of Pardubice and Hradec Králové. These towns are both capitals of two neighbouring regions (Pardubický and Královéhradecký, respectively). This thesis deals with the differences in pricing practices in these two towns. The time interval relevant for the comparison is the period between 1. 3. 2015 – 1. 3. 2016. The data from this period were first collected,this was followed by gathering the information on the individual traded dwelling units. Consequently, the gathered information was compared for the two towns.
|
|
|
Apartment building, Heřmanův Městec
Ryšánková, Nikola ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
The bachelor thesis deals with the design of a multi-storey apartment building with regular garages in Heřmanův Městec. The building has three aboveground and one underground floors. The house with eight dwelling units is designed for family housing. The main entrance to the building is oriented to the east. The house has an irregular rectangular shape of the ground plan and is roofed with a flat roof. Residence rooms are oriented to the south and west. The building is built of ceramic blocks on the above-ground floor and concrete blocks of lost formwork on the underground floor. Horizontal constructions consist of ceramic inserts and beams. The project was developed using the tutorial version of the AutoCad computer program. During processing, emphasis was placed on layout solutions, architectural appearance, static requirements and safety of use.
|
|
|
Apartment building in Moravany near Brno
Kraus, Martin ; Juránek, Robert (referee) ; Sukopová, Dáša (advisor)
The subject of this bachelor theses is the design of a multi-storey apartment building with underground in Moravany u Brna. The apartment building is designed for family housing and consists of nine dwelling units. The main entrance of the building is oriented to the north. The apartment building has an ractangle floor plan and covered by a flat roof. The occupiable rooms are oriented to the south. The above-ground floor is made of clay blocks and the basement is made of concrete blocks. The horizontal structure consists of část-in-place reinforced concrete floor. The project was designed in the educational version of software AutoCAD. This work emphasizes layout design, architectural design, static requirements and structural safety requirements.
|
|
|
Apartment building in Humpolec
Dědic, Vojtěch ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
Master thesis of "APARTMENT BUILDING IN HUMPOLEC" is composed in the form of project documentation. The building is designed as a dweling house and it is situated in the centre of Humpolec city. The building has four floors and no basement. Supporting structure consists of a ceramic masonry and concrete elements. The drawings are processed in ArchiCAD program.
|
|
|
Apartment house with a café in Valašské Klobouky
Káňová, Anna ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with the project of a apartment house with café in Valašské Klobouky. The apartment has 5 above ground floors and a partial basement. The house has a shape of irregular polygon and is covered with a single-layer flat roof. The house has 15 dwelling units. The semi-basement consists of a cellar rooms, gym, workroom and a café which is separated unit and has its own entrance. There is a accessible dwelling unit designed for two people on the ground floor. The building is designed from a single masonry system. Both vertical and horizontal constructions are made of Porotherm ceramic pieces. Mineral wool board system is used for the thermal insulation. There is an elevator designed in the building. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
guest ::
