|
|
Effect of sub-micrometer structural features on rheology of polymer nanocomposites
Lepcio, Petr ; Chodák,, Ivan (referee) ; doc.Ing.Marián Lehocký, Ph.D. (referee) ; Jančář, Josef (advisor)
Polymerní nanokompozity (PNCs) mají slibnou budoucnost jako lehké funkční materiály zpracovatelné aditivními výrobními technologiemi. Jejich rychlému rozšíření však brání silná závislost jejich užitných vlastností na prostorovém uspořádání nanočástic (NP). Schopnost řídit disperzi nanočástic je tak klíčovým předpokladem pro jejich uplatnění ve funkčních kompozitech. Tato práce zkoumá přípravu polymerních nanokompozitů v modelové sklotvorné polymerní matrici roztokovou metodou, technikou schopnou vytvářet prostorové uspořádání nanočástic řízené strukturními a kinetickými parametry přípravného procesu. Prezentované výsledky popisují rozdíly mezi změnami rheologického chování roztoku polystyrenu při oscilačním smyku s vysokou amplitudou (LAOS) vyvolanými nanočásticemi. Výsledky vedou k závěru, že vysoce-afinní OP-POSS nanočástice při nízkých koncentracích dobře interagují s PS a tvoří tuhé agregáty, zatímco nízko-afinní OM-POSS nanočástice za těchto podmínek neovlivňují deformační chování polymerních řetězců. Dále byla pozornost zaměřena na vliv použitého rozpouštědla na uspořádání nanočástic v SiO2/PMMA a SiO2/PS nanokompozitech, který je v literatuře prezentován jako parametr řídící prostorové uspořádání nanočástic v pevném stavu. Důraz byl kladen na kvalitativní rozdíly mezi „špatně dispergovanými“ shluky nanočástic, které byly na základě rheologie a strukturální analýzy (TEM, USAXS) identifikovány jako polymerními řetězci vázané nanočásticové klastry a dva typy agregátů, jeden termodynamického a druhý kinetického původu. Jednotlivé druhy agregátů se vyznačují odlišnými kinetikami vzniku a rozdílnými vlastnostmi jak mezi sebou, tak v porovnání s dispergovanými nanočásticemi. Pozorované typy disperze nanočástic byly kvantitativně posouzeny podle svých rheologických vlastností během roztokové přípravy, podle kterých byla vyhodnocena míra adsorpce polymeru na povrch nanočástic a atrakce ve vypuzeném objemu. Výsledky byly porovnány s teorií PRISM. Důležitost uspořádání nanočástic byla demonstrována na porovnání teplot skelných přechodů různých struktur při stejném chemickém složení.
|
|
|
Monitoring the effectiveness of selected adsorbents in removing AOX from water
Rutarová, Natálie ; Kotzurová, Iveta (referee) ; Repková, Martina (advisor)
The diploma thesis was created in cooperation with the company Art Carbon and is focused on monitoring the effectiveness of ART SAND adsorbents in removing AOX from water. The theoretical part provides an overview and basic characteristics of AOX, their impact on the environment and the possibility of their removal. The experimental part is focused on the study of the effectiveness of selected adsorbents with the subsequent use of high performance liquid chromatography (HPLC) with UV detection. Two ART SAND, ASSP50 and ASPP50-X adsorbents, supplied by ArtCarbon, were selected 2,4-dichlorophenol and 2,6-dichlorophenol to monitor adsorption.
|
|
|
Study of the behavior of insulating materials in a high humidity environment
Havelka, Jindřich ; Peterková, Jitka (referee) ; Zach, Jiří (advisor)
Extruded polystyrene (XPS) is presented as non-absorbent material and it is applied in building construction with high moisture, such as inverted roof. The reason for that is a very good ratio of thermal and mechanical properties and it is used in moisture-loaded applications due to the closed pore structure and high diffusion resistance factor, which are declared by the manufacturers. Long-term experience and studies show that XPS accumulates moisture during long-term exposure in an environment with high humidity. A long-term water absorption test at full immersion for 84 days has been proposed to better illustrate the trend of increasing water absorption. A total of 6 products from different manufacturers that are recommended for inverted roof application, were tested. All tested XPS products have reached high amount of water absorption. The main goal was to map the real properties of XPS at high humidity loads. It was found that each product showed a different degradation of thermal conductivity at the same volume moisture value. Furthermore, there was found the connection between the surface structure and amount of water absorption. Products with waffle structure had higher humidity than products with a fine structure.
|
|
|
Problems of phenols in water
Tylichová, Petra ; Čáslavský, Josef (referee) ; Doležalová Weissmannová, Helena (advisor)
This bachelor`s thesis deals with the issue of phenols in the waters. The theoretical part summarises the information about the characteristics of the phenols, its use, appearance in the environment, and its effects on human health. There are described methods of determination these substance in the waters. The last chapter disserts on possible methods of eliminating the phenols from the aqueous environment with special attention paid to the adsorption method. Part of this thesis is also dedicated to the chlorinated phenols which originate from chlorination of the phenolic waters and which cause the sensory interferences of the waters. The experimental part of this thesis is dedicated to removing the phenol from a model water through the adsorption into a powdery active carbon Norit SA SUPER.
|
|
|
The use of biochar as a sorption material for the removal of synthetic fragrances from water
Kašparová, Jarmila ; Zlámalová Gargošová, Helena (referee) ; Mravcová, Ludmila (advisor)
Synthetic fragrances (musk) are artificially produced organic compounds. It is used as fragrance ingredient in personal care products. Substances from this group have the ability to withstand the cleaning process in wastewater treatment plants. The physico-chemical properties of musk compounds cause their accumulation in the living and non-living components of the ecosystem, where they behave as persistent pollutants. The adsorption process is considered to be one of the most widely used separation and purification processes. The adsorption processes of a solution of sixteen synthetic fragrances took place with biochar and activated carbon. Solid phase microextraction (SPME) was used as a method for extracting analytes. Gas chromatography coupled with mass spectrometry (GC-MS) was applied for final analysis, time of flight analyzer was used as detector. The data were fitted with adsorption isotherms.
|
|
|
Removal of micropollutants from wastewater by adsorbtion.
Trávníček, Jakub ; Macsek, Tomáš (referee) ; Hlavínek, Petr (advisor)
The aim of the thesis is to create a research on the issue of adsorption of micropolutants with a subsequent focus on biochar. The first part therefore deals with the micropolutants themselves, the origin of their formation in wastewater and their negative impact on the health of organisms. It also deals with adsorption technology, discusses its basic knowledge necessary to grasp the topic and describes known adsorbents and their use. It pays special attention to biochar. The second part of the thesis deals with practical filter tests of adsorption abilities of biochar on wastewater from tunnel maintenance and treatment carried out in the laboratory of the AdMaS centre.
|
|
| |
|
|
DFT calculations of graphene regarding to biosenzoric applications
Špaček, Ondřej ; Friák, Martin (referee) ; Bartošík, Miroslav (advisor)
This diploma thesis is focused on calculation of both structure and electronic properties of the graphene after the adsorption of atomic and molecular oxygen and urea using the Density Functional Theory (DFT). The influence of van der Waals interactions on the structure and adsorption energy is studied, as well as influence of the thermal corrections, the charge density spatial distribution and the electronic doping of graphene after the adsorption of the adsorbant on the graphene.
|
|
|
Stability of humic complexes
Vlašicová, Silvie ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
This bachelor thesis is focused on humic acids as an active ingredient of organic soil substance and their interaction with the selected drug, Ibuprofen. The aim of this work was to optimize the methods of drug determination in solutions containing humic acids. Subsequently, adsorption experiments were performer to provide information about the adsorption efficiency depending on the concentration of Ibuprofen. Desorption experiments were then used to determine the stability of humic substance complexes with Ibuprofen, or, more precisely, the proportion of the mobile and bound Ibuprofen fraction in the prepared complexes.
|
|
|
Possibilities of removing metals from drinking water sources by water treatment processes
Marzinová, Kristýna ; Látal,, Milan (referee) ; Biela, Renata (advisor)
In my diploma thesis I focused on the issue of metals, their occurrence in drinking water sources in the Czech Republic and the possibility of their removal by water supply processes. Heavy metals degrade the quality of water resources, so more complex water treatment technologies are needed. The first part describes the metals, their properties, their significance and occurrence in water, then the possibility of removing metals using water supply processes. In the practical part of the diploma thesis I performed a laboratory experiment to remove iron, manganese and nickel by adsorption on selected filter materials, which are Filtrasorb F100, Filtrasorb F 400, Bayoxide E33 and GEH. The experiment was used to compare the effectiveness of selected sorption materials.
|
guest ::
