|
|
Administrative building with operational warehouses - construction technology project
Hirsch, Roman ; Boháček, Adam (referee) ; Biely, Boris (advisor)
The focus of this thesis is on the description of realization of administrative building with operational warehouses in Brno. The thesis consists of report on construction and technology, study of the realization of the main technological stages, technical report on site technologies, technical report on wider transportation connections, proposal for the machinery assembly, time schedule, detailed budget, technological guidelines for rein-forced concrete ceiling, control and exam plan for reinforced concrete, report on safety and health protection on construction site, environmental requirements, and in lastly also comparisons of material of contact thermal insulation system, crane proposal, noise study. The thesis consist 15 annexes.
|
|
|
Static analysis of steel structure
Čejková, Eva ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The diploma thesis is focused on the comparison of the linear and nonlinear analysis of the steel structure and the resulting differences in both the numerical results and the time needed to obtain these results These analyzes are performed on a high-rise building, which has 10 floors and is used as an administrative building. Static model construction and calculations are performed in software system from Dlubal RFEM only loads for individual load cases are calculated manually.
|
|
|
Heating using condensing technology
Jadrníčková, Kateřina ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The subject of this bachelor thesis is the design of heating and hot water preparation of an administrative building in the complex Svit in Zlín. The building has three above-ground floors. As a source of heat are designed gas condensing boilers here. In the theoretical part A is solved the problem of gas condensing boilers. The computational part B deals with the design of the heating system, the preparation of hot water and the safety, expansion and other equipment necessary for the design of central heating. The last part C consists of the technical report and the drawing documentation of the heating of the building.
|
|
|
Corporate headquarters Dlabaja a.s.
Dlabaja, Adam ; Burianová, Lenka (referee) ; Petříček, Tomáš (advisor)
The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.
|
|
|
Multifunctional multi-storey building
Kántor, Albert ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The aim of this thesis is a design of a multifunctional multi-storey building consisting of six floors which is located in Česká Třebová. The floor dimensions of structure are 56,5 x 26,5 m and its height is 22,150 m. The building is covered with green roof. The mail load bearing structure consists of primary beams, secondary beams, columns and vertical bracing. The floor structure is designed as a composite steel and concrete structure. The spatial rigidity of the structure is secured with vertical bracing and rigid concrete roof slab. Main used materials are structural steel S235, S355 and concrete of grade C25/30.
|
|
| |
|
|
Bravia administrative building
Jiruška, Daniel ; LIpka, ing Miroslav (referee) ; Eliáš, Luboš (advisor)
The aim of the Diploma thesis is the project documentation for the execution of the administrative building. This is an administrative building located on the outskirts of Letohrad. The building consists of one section that has three above-ground floors and one section that has only one above-ground floor. The building is used for administration, trade and storage. For administrative work is designed the three-storey part of the building and single-storey part of the building is designated for trade and storage. The main entrances to the building are located on its west side and the next entrances to the building is located on its southern side and northern side. The building is based on foundation strips and pads of plain concrete. The building is designed from a masonry structural system made of concrete blocks made of lightweight concrete and the third floor is partly designed as a timber structure made of wooden KVH squared timber. The ceiling structures are designed from prestressed ceiling panels. Roof structure above the main part of the building is designed two-stage pitched roof octagon shape and the roof above the single-storey part of the building is designed as warm flat extensive green roof.
|
|
|
Design of a heating system for an office building
Vítek, Lukáš ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The aim of this bachelor thesis is to design a proposal of space heating and water heating system for an administrative building in Ostrava. The building has four above-ground floors and an underground floor. In the underground floor are located technical building background, stocks and a parking. In the above-ground floors are administrative offices. The heating is solved as a water heating, with a distribution of the heat into the space using panel radiators and convectors. Water heating is solved by an accumulation heater. As a heating energy source serves a cascade gas boilers. We can find in the whole building a forced ventilation. The theoretical part of this thesis deals with the BIM technology.
|
|
|
Block Cejl – Svitava RIver Waterfront
Kubíčková, Karolína ; Pavlovský, Tomáš (referee) ; Havliš, Karel (advisor)
The subject of interest in this bachelor thesis is the premises of the former textile factory in Brno - Zábrdovice. The location, located between Cejl Street and the Svitavy embankment near the historical center of the city, has great potential for development. In the urban part, the thesis deals with the creation of an optimal building program, namely space for housing and leisure. It deals with a suitable connection to the surrounding transport. From the Architectural part, solves the design of residential buildings and their connection to the whole area. It also deals with the opening of the area towards the Svitavy embankment and closes the block towards to Cejl street.
|
|
|
Entrance zone objects of WANEMI, a.s. paper-mill in Zábřeh
Horký, Jan ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
The diploma thesis deals with the entrance zone objects nearby a to-be-built energetic-paper mill factory WANEMI, Inc. in Zábřeh. It consists of two objects: a presentation pavilion and an administrative building. My design combines a function of parking and administration into one single object to occupy less land. Garages are intersected by a big open skylight in the middle with some trees planted in - this way people are moving as if in the treetops. The exhibition pavilion is situated in the intersection of main view axes to landscape dominants. Their extension is projected even into the interior where they determine main spaces. Visitor of the building climbs the way up along the important views to finish his way upstairs in the main hall.
|
guest ::
