|
|
Analysis of thermal properties of the synchronous machine
Paszek, Michal ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
In this Master´s thesis will be performed an analysis of thermal properties of synchronous machines in the program Ansys Workbench on a simplified model of synchronous traction motor. In the first section will be performed thermal analysis without cooling followed by analysis of air flow and finally thermal analysis with cooling for fan speed 1500 min-1 and 3000 min-1. The second section will describe the principle, construction and losses on the synchronous machine. The third chapter will describe concepts such as heat, temperature, heat transfer, types of the heat transfer, specific heat capacity, emisivity and thermal conductivity. The fourth chapter will introduce the program Ansys Workbench, finite element method and Ansys CFX. In the fifth chapter will be described how to perform thermal analysis on the created model of motor. The sixth chapter will describe how to analyze the air flow of the created model of motor. The flow analysis will be performed for fan speed 1500 min-1 and 3000 min-1. In the seventh chapter will be compared the results of the air flow and pressure field in the motor model. In the eighth chapter will be performed a thermal analyzis on the created motor model with cooling for fan speed 1500 min-1 and 3000 min-1. The nineth chapter will compare the results of temperatures and heat fluxes obtained from the thermal analysis witnout cooling, with cooling for fan speed 1500 min-1 and 3000 min-1 for full losses, half losses of continous running, and full losses of interrupt running for 9000 seconds (2 hours 30 minutes).
|
|
|
Calculation of the cooling medium in the asynchronous
Trnka, Zbyněk ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
The aim of this master´s thesis was to model the fan for the induction motor, and then to solve this model using Ansys CFX in the terms of flow, when considering the different speeds of rotation of the rotor. The introduction of this work is dedicated to basic terms and definitions from spheres of fluid flow, cooling of the electrical machines, especially to the cooling of the asynchronous machine. There is also attention paid to losses in this machine. Finally, there is modeled radial fan and an air gap of specified induction machine. By using Ansys CFX the flow, which passes from the fan into the air gap, is analyzed.
|
|
|
Utilization of adaptive CAD systems at virtual model creation of electrical motors
Sedláčková, Petra ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
Thermal analysis of electric machine is one of the key steps in design procedure. Traditionally, thermal calculations are done by analytical method, mostly based on equivalent electrical circuit, where thermal quantities are replaced by equivalent electrical quantities. These methods employ so-called electro thermal analogy. Different approach is to use Finite Element Method, which is the main goal of this thesis. First part of the thesis is devoted to description of CAD system Autodesk Inventor, which is modern parametric CAD for modelling of virtual prototypes. This system is then used for creation of three dimensional model of brushless DC machine. Second part is focused on thermal calculations in Ansys Workbench environment. Model of brushless DC machine created in Inventor is transferred into Ansys Workbench and thermal analysis is carried out.
|
|
|
Physical Fields Modelling of EC Motor's
Kružík, Pavel ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
This thesis concludes a description of construction and functions of Electronically commutated motors. The main target is modelling of thermal field of Electronically commutated motors. For modelling was chosen Ansys Workbench setting with CAD geometry. There was a measurement for verifying result of simulation, and its proof is described in my thesis. This project also concludes comparison of results from simulation itself and results obtained from measuring thermal profile of EC motor.
|
|
| |
|
|
Virtual modelling of computional domain for CFD simulations
Volek, Matěj ; Naď, Martin (referee) ; Dohnal, Miloslav (advisor)
This thesis is devoted to open-source software for meshing in CFD simulations. In the opening chapter, there is introduced the computational modeling of fluid, briefly described governing equations and an introduction to the discretization of computational domain. The second chapter deals with the available mesh software. The programs are described in this chapter from the perspective of the user interface, the ability to create meshes, etc. The last chapter, there is a comparison of two selected programs on a real problem. In both programs was created a mesh which was calculated in the software Fluent. Then the calculation results are compared.
|
|
|
Stress and deformation analysis of the stem and cup of the total replacement of the trapeziometacarpal joint
Svojanovský, Tomáš ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
The center of attention of this bachelor’s thesis is stress and deformation analysis of the total replacement of the trapeziometacarpal joint. The first part is formed by medical essence of the matter, namely from the anatomical and pathological point of view. The connecting link between literature research and analysis creates a short introduce to the finite element method. To the stress and deformation analysis itself was used the program ANSYS Workbench 14.5 based just on the finite element method. One of the purposes is to get to know this program and to learn to gain correct results. The main target is to catch and describe stress and deformation of the simplified model of a certain implant. Despite some of the simplifications, resulting values should approach to the real values. Except for the mentioned analysis, there are introduced different approaches, which could be used for the solution. There is also some comparison of advantages and disadvantages of particular approaches.
|
|
| |
|
|
Computational systems based on FEM for designers
Frémund, Libor ; Vaverka, Michal (referee) ; Vrbka, Martin (advisor)
This work deal with computational systems on base method final elements intended for engineer. There are descibed most often used systems, their function and included moduls that help engineer at work. Work describes four most widely used computing program - ANSYS Workbench, COSMOS DesingSTAR, Abaqus and FEMPRO. Every system is further dispersed to the subchapter, in which are circumscribed his characteristics and possibility working system. At the close are reviewed and planed individual systems and further also intended fitness using single system under given conditions.
|
|
| |
guest ::
