|
|
Controlling of programmable analogue circuit
Sobotka, Josef ; Hanák, Pavel (referee) ; Vrba, Kamil (advisor)
This work deals with the design of the control software for the programmable analog circuit adjustable by means of a computer via the serial interface for the computer, as well as for programming the microcontroller. In addition, analyses the internal structure of programmable analog circuit on which it is proposed to further control, design of printed circuit boards for final programming and test equipment and measurement of the basic parameters of the circuit (transmission and phase frequency characteristics of parts and units).
|
|
|
Multifunctional Building
Štěrba, Maroš ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The objective of the diploma thesis is to design project for the realisation of new a multifunctional building in city of Brno, Zábrdovice on the corner of Příkop and Bratislavská streets in the wider city center. The object with cellar contains a collective garage. On the ground floor there is a café, from the second to the fourth floor offers rentable office space, on the top floors, the fifth and receding sixth floors are situated apartments varying in size from studio to penthouse. The building is based on a white tub and piles of plain concrete. The supporting system consists of a plate skeleton with concealed heads with reinforcing reinforced concrete monolithic core and two gable reinforcing walls. The skeleton is filled with brickwork. Covered by a combined roof. The main entrance to the building is located on the eastern side along Příkop Street. The architectural expression of the building consists of ceramic cladding strips and rhythm of the hole fill pattern, which decrease with the rising floor.
|
|
|
SMS Enterprise Premises
Hozová, Tereza ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The Bachelor thesis focuses on small and medium-size enterprise (SMEs) premises situated near the Kšírova Street in Brno. The construction area is to be found in the city district Horní Heršpice. The nearest surroundings are characterised by a multifunctional neighbourhood. At the same time, the new planned city district is taken into consideration. The area intended for reconstruction has recently served as a builder´s yard. The designed construction is composed of two buildings and its location on the plot enables it to form a city block. Although both, the main and the adjacent building are designed as four-storey buildings, the main building is significantly larger. Main gallery, production areas with facilities, eating facilities, management and a car park are to be found in the main building. The access to individual production units is from outside back porches. The perforated metal sheet front wall facing the city district constitutes a chief element having aesthetic and psychological functions. There is an inner yard between the two buildings that is going to be used for supplying.
|
|
|
Private clinic in Velké Meziříčí
Virgl, Jan ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
In my thesis I proposed private clinic in Velké Meziříčí, it is a four-storey building with partial basement. The building is designed as system without girders. The building is approximately L-shaped, has a flat roof. There are a physician offices, pharmacy and X-ray equipment.
|
|
|
Electronic informative board
Kakáč, Tomáš ; Křivák, Petr (referee) ; Diblík, Jan (advisor)
This thesis dealt with concept of electronic informative board. The board is connected PC via USB. Data are converted from USB using converter to input microprocessor. These data are processed and displayed on graphic lcd display. During bachelor's thesis we're resumed with realization electronic informative board. We used a microcontroller from Atmel. Futher, we required a real-time circuit from manufacture Epson. For the imaging unit we used a graphic LCD display from copany Powertip. Following the design we compiled and revived a hardware part of the device. After a succesfull revive, we compiled a program for microcontroller. It was written in programming language C, with use of compiling enviroment AVR studio 4.
|
|
|
SMS Enterprise Premises
Zatloukalová, Veronika ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The Bachelor thesis focuses on small and medium-size enterprise (SMEs) premises situated near the Kšírova Street in Brno. The construction area is to be found in the city district Horní Heršpice. The nearest surroundings are characterised by a multifunctional neighbourhood. At the same time, the new planned city district is taken into consideration. The area intended for reconstruction has recently served as a builder´s yard. The designed construction is composed of two buildings and its location on the plot enables it to form a city block. Both buildings are designed as a four-storey, one of the buildings are located underground parking. There are main entrance hall, production areas with facilities, eating facilities offices and a car park in the buildings. The access to individual production units is from outside back porches. There is an inner yard between the two buildings that is going to be used partly for supplying and partly to rest. The street facades are compact character, austere space is lined CETRIS plates, strip windows are placed in fixed horizontal and vertical lines.
|
|
|
Design of education board
Hadáček, Milan ; Buganská, Tamara (referee) ; Karásek, David (advisor)
The aim of my diploma thesis is to blueprint a design of multi-functional educational console. The dissertation contains several variant studies, color drawings and concrete shape execution. It entails a certain development in the area of positioning and multi-functional appliances. The thesis itself deals with the concrete shape execution of multi-touch educational console as well as seat in the form of gym ball. Short video cut from the area of interactive media forms a part of my work too.
|
|
|
Design and construction of an interactive light sources panel
Žák, Martin ; Pavelka, Tomáš (referee) ; Škoda, Jan (advisor)
This semestral thesis deals with design and construction of the interactive light sources board and measurement of various parameters of those light sources. Using the given requirements, a solution is worked out (construction materials, behaviour, design, wiring etc. are given). Based on this, the interactive board was also constructed and put into operation. The thesis is also focused on the given light sources themselves (incandescent light bulbs, halogen lamps, compact fluorescent lamps, fluorescent tubes and LED lamps) and their measurement results are presented.
|
|
|
Prestressed bridge over the river
Kačer, Karel ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
As the thesis I chose static solving bridging the road. This is a real first-class roads situated near the city Kolín in the Central Region. The bridge will be used to transfer traffic across of local Sendražický stream. At the beginning I determined three main variants of supporting design and then I chose one for more detailed processing. It is a armored concrete slab solidified two prestressed ribs arching spanning 18.3 m The calculation is implemented by software Scia Engeneer in accordance to European standards.
|
|
| |
guest ::
