National Repository of Grey Literature 66 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Family house
Houček, Jan ; Čech, Miroslav (referee) ; Berková, Petra (advisor)
Abstract: The aim of my bachelor thesis was to design a nearly–zero-energy two-storey detached house. Object will be designed in Horní Cerekev. The ground floor, there is a kitchen which is connected with living room, then a toilet and a utility room. There is also a garage for two car’s. The first floor contains two children’s room, a bedroom, a bathroom and toilet. The house is located on a flat plot of land. Foundations are from the cast-in-place concrete. Walls are designed from the brick of Porotherm. The ceiling structure is designed from the Spiroll panels with suspended ceiling from plasterboard. The roof above the garage will be used as a terrace and second floor roof will be flat green roof. The object meets all requirements for fire safety. The main source of renewable energy is 13 PV installed on the roof. The house is heated by an air-to-water heat pump located next to the utility room. The water is heated by an internal heat pump and stored in an accumulation tank. Floor heating is solved in the house. The Object is carried out forced ventilation and air handling unit with heat recovery designed. The living area will have fan-coils installed for cooling. Rainwater will be accumulated in the storage tank and infiltration blocks, and then it will be used to irrigate the garden. Horní Cerekev has its own wastewater treatment plant where the wastewater from the building will be discharged. From the building physics, The building was classified as A, that meaning that the building is exceptionally economical.
Heating and cooling of the administrative building with hall
Hečko, Jakub ; Horká, Lucie (referee) ; Topič, Jan (advisor)
The bachelor thesis deals with the design of heating and cooling for an administrative building with a storage hall. The theoretical part focuses on large-area radiant heating. The computational part includes a detailed design of heating for the administrative building with a storage hall and a design for cooling the administrative building. The administrative building is heated by underfloor heating, while the storage hall is heated using hot water radiant panels. Cooling for the administrative building is designed using two-pipe cassette fan coil units. The source of heat and cold is an inverter air-to-water heat pump. Ventilation is considered forced, using air handling units. The design of hot water preparation is addressed as a priority. The project part includes drawing documentation and a technical report.
Pension
Koršala, Martin ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
The subject of this final thesis is the preparation of a project documentation for the building construction of a new pension with restaurant and wine cellar. The compound is located in Vážany nad Litavou. Its location falls under Velké Pavlovice area. Due to the location in this wine-growing region is in the project located, a wine cellar with a vineyard. The project is designed as a guesthouse with the restaurant designed for families with children, and for holding small social or company events. For this purpose, is in the main building designed a lounge with capacity of 20 people and a restaurant with capacity of 60 persons. The accommodation capacity provided in the pension is 43 beds. Pension offers background designed for relaxation or wellness stays thanks to the sauna and whirlpool. The building has rectangular plan on two basements and two above-ground floors with a mono-pitched roof facing south. This makes it possible to use solar power from the roof and south-facing facade. Water from the roof of the building is collected in a small pond, which serves as a storage reservoir useful in case of fire and vineyard irrigation. Near the building there are paved and parking areas.
Heating of the exhibition rooms
Ženíšek, Pavel ; Vendlová, Lucie (referee) ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The bachelor thesis delas with the heating of the exhibition rooms and preparation of the warm water. The building will be heated by plate radiators, convectors and underfloor heating. As a heat source is used a heat pump. Warm water is prepared in the DHW cylinder, heated by the heating water from the heat source. The project deals with the desig,n dimensioning and connection of these parts. The thesis also includes a theoretical part on the topic of underfloor heating.
The heating system with accumulation
Bártů, Marek ; Moskalík, Jiří (referee) ; Štelcl, Otakar (advisor)
Bachelor's thesis "The heating system with accumulation" is concerning with an appropriate solution of heating of a house. The thesis is divided into two main parts. The first part is dedicated to theoretical introduction that clarifies the issue of accumulation tank and describes how it works and what kind of processes takes place here. The second, practical part is devoted to calculation of losses and design of heating system in combination with the accumulation medium. As a model example is taken a house in Brno - Židenice.
Using of Rain Water in Hotel
Veselská, Monika ; Hořínková, Lucie (referee) ; Wierzbická, Helena (advisor)
Bachelor´s thesis contains suggestion system using a rainwater in hotel, suggestion of accumulation tank, sizing divorce cold drinking water and non-potable water in building and water connection.
Sanitation installation and gas installations in the hotel
Šumpík, Vojtěch ; Vrána, Jakub (referee) ; Vaščáková, Alena (advisor)
This Diploma Thesis presents a project focused on the installation of utilities consisting of fresh and hot water distribution, gas plumbing, and waste or sewage piping within the building along with their connection to a public network. The building is located in the village of Ratmerice and is intended as a hotel with a restaurant. In addition, the document presents different options for hot water preparation and distribution, along with an assessment of the advantages and disadvantages of the different systems available. A comparative analysis based on various criteria is carried out to determine the optimal solution for the specific characteristics of the building, its intended use, and the availability of public servi-ces in the given location.
Design of Log House Heating
Blažek, Eduard ; Blasinski, Petr (referee) ; Maurerová, Lenka (advisor)
The thesis proposes heating the family log house. It contains a theoretical analysis of thermal insulation and thermal behavior of log house. The work on the proposed experiment termocentral box, who cares about the operation and management of the heating in the house with the possibility of control over the internet. The findings were practiced in the design of heating through termocentral box the heat source for wood, storage tank and preparation hot water.
Swimming pool
Sívek, Zdeněk ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached indoor pool with one underground and one above ground floor, which is designed for a maximum capacity of 120 people, with two swimming pools, a children's swimming. The building is designed with a flat rectangular roof insulation. Envelopes are ventilated, insulated, bearing part consists of reinforced concrete. The pool hall make up the majority of the building envelope glass facade. Facilities for employees is located on the first basement floor. All technologies for cleaning pool water, air conditioning, boiler, facilities for maintenance are located on the first basement floor. Chimneys are stainless steel, placed on the outside of the building. The finish floors are ceramic tile. Pool bath is designed as a so-called white bathtub. The supporting structure of the ceiling above the pool hall beams are post-tensioned concrete.
Heating system in health center
Snášelová, Tereza ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor's thesis is design of heating and warm water preparation of health center. The project expect natural ventilation and consists of calculating heat losses, designing of heat source, heat transfer surfaces designing, pipeline proposition and regulation, warm water preparation designing and designing of boiler room. Warm water is preparing in combined DHW cylinder by heating water from boiler. Source of heat is pellet boiler.

National Repository of Grey Literature : 66 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.