|
| |
|
|
Accurate AC Current Measurements
Nováková Zachovalová, Věra ; Vrabček,, Peter (referee) ; Draxler,, Karel (referee) ; Beneš, Petr (advisor)
In recent years precision measurement of alternating currents goes through large progress especially because of improvements in metrology of electric power, which is related to reduction of electricity consumption. Therefore, more precise measurement of electric energy, power and power quality is required. Measurement range is extending and number of measured frequency points is growing up to 100 kHz. Development of current to voltage transducer with normalized output voltage (0,5 V - 1 V) is in progress because of their easy integration in different measuring systems.. From big area of alternating current metrology this dissertation focuses on development of improved cage shunts for measurement of alternating currents in range 10 mA - 100 A, 10 Hz - 100 kHz. Main objective of this dissertation is to develop theoretical model of existing cage shunts, which will assist design of new improved cage shunts construction. In this dissertation the analytical model of CMI’s cage shunts was established, based on calculating of trans-impedance from cascade matrix of passive two-port which is representing the shunt. Trans-impedance can be used for AC-DC difference and phase error calculation, which are two basic parameters of shunts. Uncertainty analysis of the model was done by means of Monte Carlo method. Next, this dissertation also concentrates on suitable measurement methods of phase error, AC-DC difference, and power a temperature coefficient of resistance. These measurements method were used for calibration of existing CMI’s cage shunts and so the model’s verification was made. Finally, theoretical optimization of existing CMI’s cage shunts constructions and theoretical designs of 20A, 50A and 100A shunts were done using sensitivity analysis results.
|
|
|
Proposal Of Marketing Strategy
Doležalová, Andrea ; Nováková, Věra (referee) ; Rompotl, Jaroslav (advisor)
The diploma thesis focuses on marketing strategy in the selected insurance company. Specifies fundamental terms of marketing ang strategy and compares with reality. It contains proposal of marketing strategy that support to increase market share and production size in the selected company.
|
|
|
Surveying of a renaissance chateau area for creating thematical map of a historical monument, 2nd locality
Nováková, Věra ; Houška, Radek (referee) ; Foral, Jakub (advisor)
The main aim of this project was to create a thematical map of a renaissance chateau area in Rosice u Brna. Detailed measuring was made by tacheometry and it was joined to the Czech state positional point field and the Czech state vertical point field. Auxiliary observation stations were made by Global Navigation Satellite System, polygonal traverse and polar method. The map is made in the coordinate system JTSK and the vertical system Bpv, Graphical scale is 1:500. The map contains planimetry and altimetry (contour lines). The accuracy of the map complies with the third classe of accuracy of the standard ČSN 01 3410.
|
|
|
Low level DC voltage measurement
Obšilová, Lucie ; Nováková Zachovalová, Věra (referee) ; Havlíková, Marie (advisor)
This thesis deals with low level DC voltage measurement by three methods. First part of this thesis describes each method. It is about potentiometric method, reference step method and direct method. This thesis also describes Josephson voltage standard which was used for calibration nanovoltmeter and Zener reference. The theoretical part of this thesis also deals with the evaluation of key comparison data. The main goal of this thesis is the comparison of methods used to measure low level DC voltage. The practical part of the thesis deals with the implementation of measurement with all methods in cooperation with Czech metrology institute. The measured values are processed including uncertainty evaluations. The final part of this thesis focuses on comparison of measurement methods. The key comparison reference value and the degree of equivalence of the measurement of each method are determined. Next part of comparison consisted of graphic comparison of methods. The end of the thesis contains evaluation of the achieved results.
|
|
|
Meaurement process automatization of deviations and stability of oscilators
Čermák, Jan ; Nováková Zachovalová, Věra (referee) ; Havlíková, Marie (advisor)
This Master´s thesis on a topic ,,Meaurement process automatization of deviations and stability of oscilators‘‘ describes methods for measuring the difference of time scales. Using this method, calculates the parameters of the oscillator, which is also describes in this work. Parameters of the oscillator means inning and stability. Describes is the procedure for calculating the uncertainties and their presentation in the final calibration sheet. This Master´s thesis also describes the practical measurement with this method in the Czech metrology institute in Brno. Measurement of the parameters of oscillator by the method of measurement of the difference of time scales is carried out automatically by computer. This Master´s thesis deals with the creation and development of new software and thus the automation of the entire task.
|
|
|
Meaurement process automatization of Zener reference
Bábek, Tomáš ; Nováková Zachovalová, Věra (referee) ; Havlíková, Marie (advisor)
This thesis deals with metrology specialized to DC voltage. In the begining of thesis is explanation of technical terms from metrology, summarization of units from International System and explanation of the standards and its kinds in the context of metrology. Primary standards of DC voltage based on Zener diodes and Josephson effect are described as well. In cooperation with Czech metrology institute in Brno this work is focused on automatization of measuring Zener reference standards (ZRS). Goal of this project is to automatize the measuring of Zener reference standards and its relationship with Josephson voltage system using scanner. To do this, there is a need to find out offsets, that can develop on scanner's channels. There is a theoretical analysis of measuring made on the scanner and their uncertainties. Aim of the solution is computation of scanner channels offsets using everyday automatic measuring the system of Zener reference standards (ZRS). For measuring the LabView was used and for computing the data from measured values the Matlab was used. This thesis should short the time needed when measuring DC voltage references, measure values of DC voltage standards and set the scanner channels offsets. In the end there is a summarization of offsets measured on individual scanner channels.
|
|
|
Working out of methodology for creation of building information model
Nováková, Věra ; Černý, Martin (referee) ; Hanzl, Vlastimil (advisor)
This thesis is focused on creation of building information model (BIM) for existing buildings. The main objective of this work is to develop the methodology (workflow) for the creation of BIM model using selected geodetic methods, specifically for the modeling based on the existing documentation of the building, the modeling from the handheld distance meter and the modeling from point cloud acquired by the indoor mapping system. The aim of these workflows is to explore the suitability of these methods, to check the limits of each method and to point out the potential issues. Revit (version 2013 and 2014) was used as an authoring environment for creation of the models. Workflow for modeling based on the documentation of the building shows how to insert drawings into Revit and how to create a model based on these drawings. The workflow was developed based on experience with creation of model of an office building. The workflow for handheld laser distance meter describes how to work with rangefinder equipped with Bluetooth, which allows user to create a model onsite. The third part of this thesis deals with creation of BIM from pointcloud acquired by indoor mobile mapping system. The workflow describes data collection and point clouds processing directly in Revit using the ScanToBIM extension. The results of this work are methodical instructions for the methods described above and the comparison of these methods. Workflows contain recommended procedures and highlight common issues and mistakes. This should enable the readers of this thesis to choose the right method and avoid common mistakes.
|
|
| |
|
| |
guest ::
RSS feed.