|
|
Redesign of Construction Documentation into BIM Model
Pejchal, Mojmír ; Habrovec, Jiří (referee) ; Bureš, Jiří (advisor)
The motive of the diploma thesis is the redesign of the original project documentation of an block of flats into an information model for administration and maintenance. The first part deals with modeling the building according to the drawing part of the documentation in the Autodesk Revit. The second is about the outputs of the information model and its use in building management. It also includes an evaluation of the effectiveness of redesign in relation to the detail of the model and its link to the original drawing documentation.
|
|
|
Stress analysis of rotor packet of synchronic generator
Bureš, Jiří ; Houfek, Lubomír (referee) ; Petruška, Jindřich (advisor)
This diploma thesis deals with distribution stress and strain of sheets metal of rotor packet and in critical locations of supporting bars of synchronous generator. These variants are calculated and one another comparison of analytic calculation results, numeric calculation of 2D model and numeric calculation of 3D model in three vriants ( with bars of rectangle section, circular section, with upper radius). The calculation include influence of thermal expansion, centrifugal force, interference of the packet on the shaft and prestress in the axial direction of bolt. To creation of geometric model and numerical calculation is used program ANSYS 11.
|
|
|
Detached House with Business Premises in Radobyčice
Bureš, Jiří ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
This bachelor´s thesis deals with a project documentation of a new building of a detached house with an office in Radobyčice in Pilsen. This object is two story and cellarless. In the first floor is a technical background, a double garage and a living- room with a kitchen. In the second floor are the living rooms and the sanitary facilities. Object is designed as a detached on the gently sloping ground. A roof structure is designed as a flat and a single-layer structure.
|
|
|
Deformation Surveying of Crane Track
Molčan, Vladimír ; Bureš, Jiří (referee) ; Vitula, Alexej (advisor)
The main theme of this master thesis is the design of technological process measurement and processing of measured data entered crane tracks to determine the geometric parameters of these crane tracks. Diploma thesis further describes the procedure for testing and possible rectification surveying equipment and instrumentation. The thesis is divided of 7 parts, contains 31 images, 4 graphs, 44 tables and 13 attachments. The theoretical part of this thesis contains information about several types of cranes, methods of measurement and processing, as well information on legal and technical regulations related to this topic of the thesis. The fourth and fifth parts of this thesis provides information on selected crane tracks on which the measurements were taken, the choice of methods of measurement, processing technique and the results obtained. The final part of the thesis includes evaluation of the results obtained, comparing methods of measurement, processing, evaluation and design of a technique of determining the geometric parameters of crane tracks.
|
|
|
Technical Map of Tutorial Simulator
Kupcová, Anna ; Mottl, Tomáš (referee) ; Bureš, Jiří (advisor)
Bachelor’s thesis describes planimetric survey and hypsometry in a tutorial area for geodetical measurement in front of the Brno University of Technology’s Faculty of Civil Engineering using Global Navigation Satellite System. This locality is situated in a built-up area so the goal of the thesis is, besides creating the map of this area, considering the applicability and accuracy of the chosen method. The method of measurement was Real Time Kinematics with usage of RTK3-NS service (provided by Czech Positioning System), which provides differential corrective data from the nearest reference station. The survey included solving hidden points´ (trees, lampposts, etc.) positions and heights. The detailed survey points´ rectangular spatial coordinates Y, X in Datum of JTSK and heights H in Bpv Vertical Datum were calculated using the global transformation key ETRF JT 01 and a geoid model, that were part of a measuring device Leica 1230 GG. Thesis´ final product is the technical map of the locality at a scale of 1:500 valid for spring 2011, containing planimetry, hypsography and map lettering in a digital form. Thesis also embraces analysis of the applicability and the achieved accuracy of the applied method.
|
|
|
Analysis of Current Surveying Methods of Railway Track Spatial Position
Langar, Tomáš ; Vavrečka, Libor (referee) ; Bureš, Jiří (advisor)
This diploma thesis deal with analysis of current surveying methods of railway track spatial position of the track section located between Břeclav and Znojmo. At the beginning of the work there is described historical development of railway geodesy in our country and conditions of railway geodetic points field abroad. Further there are mentioned rules for measurement of railway point fields in the Czech Republic. In the following chapter you will find sub-stages of building railway point fields in track section with analysis of accuracy measurement and a proposal of prior accuracy of measurement for computing with the least square method. In the end of the thesis there is described a calculation of parameters spatial track geometry with the suggestion of computing service for uniform way of calculating partial stages of railway geodetic point field.
|
|
|
Machine Control System Using GNSS
Růžička, Rostislav ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
Bachelor thesis describes technologies for control of building machines. It focuses mainly on building machine contorl using GNSS technology. It solves the preparation of the data from the project documentation, the connection to the primary building network, the machine calibration, the documentation of the standing control and the measurement control. Finally, it explores the advantages and disadvantages of using this technology. The bachelor thesis is a guide to how construction machinery can be using control of modern technologies.
|
|
|
Surveying and Elaboration of Technical Map of the "Kravi hora" Locality.
Sabo, Stanislav ; Hořejš, Marek (referee) ; Bureš, Jiří (advisor)
The main aim of this thesis is a creation of a technical map of Kraví hora area in scale of 1:500. The thesis describes all the stages of the process of creating this map - reconnaissance, surveying network, detailed measurements, data processing of these measurements, data analysis of the accuracy to graphic data processing. This thesis also deals with a comparison of geodetic directives obtained from public utility commissioners and a creation of a thematic map in digital form according to the attributes in tables contained in these directives. The main result of this thesis is a technical map which contains planimetry, altimetry and map lettering according to the CSN 01 3410 and CSN 01 3411 standards.
|
|
|
Surveying and elaboration of the technical documentation of the Church Building
Ferencová, Anna ; Nádeníček, František (referee) ; Bureš, Jiří (advisor)
The subject of the diploma thesis is a elaboration technical documentation of St.Peter’s and St. Paul’s church in Banske. The first part of the documentation includes the basic overview and study background description. Further on, the subject site description is developed along with detailed description of each step related to the surveying, processing, assessment and interpretation of the collected data. Final set of drawings includes the Site plan of surrounding lots, top views, cross and longitudinal sections and elevations.
|
|
|
GNSS Deformation Measurement of Railway Structure
Buday, Michal ; Bureš, Jiří (referee) ; Švábenský, Otakar (advisor)
The purpose of this thesis is to evaluate the train bridge shift using the satellite geodesy methods. Introductory part of the thesis is devoted to GNSS basis. The following part discribe work with commercial software Leica Geo Office. Results of calculations were transformed to local topocentric frame. In this frame were compared differencies between GNSS meassurment and classical terrestrial methods. Part of this thesis is to consider tropospheric refraction influence based on used tropospheric model. The end of this thesis is devoted to consider hypothesis that reference point which was considered as solid does not show trend of changing it's location. For this purpuse BERNESE GPS Software was used. GNSS meassurments were linked to the nearest points of permanent GNSS networks. Results are documented numerically and graphically.
|
guest ::
RSS feed.