|
|
Transport of metal ions in humic hydrogels
Hegr, Martin ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
This diploma thesis is focused on the study of diffusion of metal ions in hydrogel of humic acid. The objective of this thesis was to investigate the effect of the concentration of metal ions supply source and duration of diffusion on transport through the gel using method of diffusion couple. Cupric, nickel and cobalt ions were esed like the diffusion medium. All these ions were selected thanks to their high affinity for the humic acids and because they are ideal to investigate the diffusion through the humic gel. Chloride salts of these metals, namely CuCl2, NiCl2 and CoCl2, were used like supply sources. Three different concentrations of each solution were compared, specifically 0,05M, 0,1M and 1M, and also were three different durations of diffusion, specifically 10 hours, 1 day and 3 days. Metal ions were compared with each other in order to determine which one has the best transport properties through the humic hydrogel. The data, necessary for calculation, were obtained by UV-VIS spectrophotometry. Diffusion coefficients and duffusive flux of individual metal ions were determined from measured data.
|
|
|
Electrolytic properties of hyaluronan solutions
Suchá, Šárka ; Smilek, Jiří (referee) ; Chytil, Martin (advisor)
This batchelor thesis deals with electrolytic properties of hyaluronan in aqueous solutions. In this study measuring of conductance, acid-base and conductrometric titration, and UV-VIS spectroscopy were used. The measuring of conductance was made on the solutions of different concentrations of hyaluronic acid and of different ionic strength. Acid-base titrations were performed in water solution and conductometric titrations were performed in 0,3mmol.dm–3 solution of sodium chloride. UV-VIS spectra of hyaluronic acid were measured in solution with addition of acid, base and in buffer solution. Values of pKa obtained from the above mentioned measurements was between 2,8–6,5.
|
|
|
Study on Sol-gel Process of Agarose by Classical Rheology and Dynamic Light Scattering
Krňávková, Šárka ; Hnyluchová, Zuzana (referee) ; Smilek, Jiří (advisor)
The main aim of the bachelor thesis was characterization of hydrogels from rheological point of view and by dynamic light scattering. Rheological part of research relates with the determination of the influence of temperature on mechanical properties, gelation temperature and temperature of solidification as well as the effect of aging on mechanical properties of hydrogel. The influence of the particle size on diffusion coefficient was investigated by scattering techniques. The positive correlation between the data obtained by both types of measurement and the potencial usage of dynamic light scattering method for the characterization of hydrogels was discussed as well.
|
|
|
Viscoelastic properties of hydrogels depending on relative humidity
Kouřilová, Ludmila ; Heger, Richard (referee) ; Smilek, Jiří (advisor)
This bachelor thesis is mainly aimed on the determination of the dependence of the viscoelastic properties of physically crosslinked hydrogels on the relative humidity controlled by humidity cell (as an accessory to a rotary rheometer), or the desiccator with the drying medium. The main objective was to optimise the methodology of the humidity cell for the rheological determination of the viscoelastic properties of hydrogel materials as a function of relative humidity and to verify experimental setup on the agarose hydrogel. The results showed that the agarose hydrogel gradually loses its dispersion medium after exposure to chosen relative humidity, resulting in a loss of contact between the upper rheometer sensor and the sample when measured with the standard measurement gap control setting, which is constant during the measurement. The setting of the control of normal force proved to be an appropriate solution, which has led to a gradual reduction in the height of the upper rheometer sensor in an attempt to keep the normal force at the desired level during the drying of the hydrogel. A humidity cell proves to be an appropriate method for determining the dependence of the viscoelastic properties of hydrogels on relative humidity. Unlike the use of a desiccator with drying medium, the drying of the hydrogel sample does not result in such rapid drying that it breaks the texture on its surface. Another advantage of a humidity cell is the ability to maintain the desired relative humidity value even if the gel begins to release dispersion medium into its surroundings, which was not possible with a desiccator with drying medium.
|
|
|
Stability of humic complexes
Vlašicová, Silvie ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
This bachelor thesis is focused on humic acids as an active ingredient of organic soil substance and their interaction with the selected drug, Ibuprofen. The aim of this work was to optimize the methods of drug determination in solutions containing humic acids. Subsequently, adsorption experiments were performer to provide information about the adsorption efficiency depending on the concentration of Ibuprofen. Desorption experiments were then used to determine the stability of humic substance complexes with Ibuprofen, or, more precisely, the proportion of the mobile and bound Ibuprofen fraction in the prepared complexes.
|
|
|
Study of biological samples using atomic force microscopy
Khýrová, Markéta ; Smilek, Jiří (referee) ; Slaninová, Eva (advisor)
The purpose of this bachelor thesis was to study Gram-negative bacteria with the ability to accumulate polyhydroxyalkanoates using atomic force microscopy. During the experimental part were studied bacterial strains Cupriavidus necator H16 and its mutant strain Cupriavidus necator PHB-4, Rhodospirillum rubrum, and Halomonas halophila. The main aim was to optimise this microscopy method to study either bacteria in the air or bacteria in liquid medium under physiological conditions. The optimisation was done considering the procedure's simplicity, time demands, and reproducibility. 10× diluted bacterial suspense was dried on a glass surface for measurements in the air. Scanning was performed using TESPA-V2 tip with lowered Spring constant in QITM mode. Various procedures for immobilising bacteria on a glass substrate using Poly-L-lysine and Poly(ethyleneimine) were tested for measurements in liquid. The method using Poly-L-lysine was chosen as the most sufficient way of immobilisation. The tips MLCT – A or SNL – B with the spring constant around 0,1 N/m were applied for measurements in liquid using QITM mode. Finally, an attempt was made to obtain information about the adhesion and Young's modulus of dried and live bacteria concerning the high difference of polyhydroxybutyrate content between the bacterial strains Cupriavidus necator H16 and Cupriavidus necator PHB-4.
|
|
|
Time-temperature superposition principle used for study of rheological properties of polymer materials
Kadlec, Martin ; Jarábková, Sabína (referee) ; Smilek, Jiří (advisor)
This bachelor thesis provides a study of the “time-temperature superposition” principle and its applicability to hydrogels. According to current research, honey was chosen due to its simple viscoelastic properties (Newtonian liquid) as a suitable material for optimalization procedure. The knowledge obtained during optimization was further applied to real hydrogel materials, namely the agarose gel was selected as an example of thermoreversible hydrogel, as well as the hyaluronan and dextran gels as examples of hydrogels formed by the interaction of the polyelectrolyte with the opposite charged surfactant. By using the “time-temperature superposition” principle, a considerable increase in the range of the observed oscillation frequencies was achieved for all chosen samples, which led to gain of information about storage and loss or complex modulus, which could not be achieved by classical oscillatory test. Although master curves were generated for all the samples examined, curves for storage and loss modulus could be created separately only for hydrogels formed by the interaction of the polyelectrolyte with the opposite charged surfactant. For this reason, this group of hydrogels appears to be more suitable materials for the application of the “time-temperature superposition” principle.
|
|
|
Mixed lipids and their interaction with biopolymers
Cigánková, Hana ; Smilek, Jiří (referee) ; Mravec, Filip (advisor)
This thesis focuses on the study of interactions between hyaluronan and lipid DOTAP and its mixtures with DPPC in water. First, the aggregation behavior of the lipid itself and its mixtures was measured, afterwards the influence of hyaluronan in different concentration was studied. Further the fluorescence anisotropy of fluorescence probe DPH in these mixtures and influence of cholesterol was measured. These properties were investigated by fluorescence spectoscopy using pyrene and DPH as fluorescence probes. The measurements revealed that the addition of hyaluronan has observable influence on the aggregation behavior of the lipid DOTAP and its mixtures with DPPC and that cholesterol influences liposomes fluidity.
|
|
|
Diffusivity of humic hydrogels
Král, Jan ; Smilek, Jiří (referee) ; Klučáková, Martina (advisor)
Presented diploma thesis focuses on the study of diffusion of cupric ions in humic acid gels. A total of fifth different standards of humic acids and one sample humic acid prepared from same source as in bachelor's thesis, on which this thesis continues, were used for preparation solutions of humic acids. Thereafter, these solutions were used for preparation of agarose hydrogels, which were necessary in following diffusion experiments. The objective of the work was to compare transport properties of humic standards between themselves and then compare standards with humic acid prepared from same source as in bachelor's thesis. Measure, which was used to determine the transport properties, was comparison of effective diffusion coefficients. Method of instantaneous planar source diffusion was used to compare them. This method was based monitoring temporal evolution of diffusion profiles of cupric ions in humic hydrogels. Copper ions were selected as diffusing medium because of their high affinity and strong bonds to humic acids.
|
|
|
Preparation and characterization of hydrogels based on cationic biopolymer
Tesařová, Barbora ; Mravec, Filip (referee) ; Smilek, Jiří (advisor)
Presented thesis deals with the preparation and characterization of hydrogels based on positively-charged biopolymer and negatively-charged tenside. As an appropriate representative of positively-charged polymer was chosen chitosan, because of his biocompatibility and biodegrability, and N,N,N-trimethylchitosan, which was synthetised from chitosan in this diploma thesis. The final product of synthesis was characterised by SEC-MALS, elemental analysis, infrared spectroscopy and nuclear magnetic rezonation. Interactions between these polymers and representatives of negatively-charged tensides, which are sodium dodecylsuphate and sodium tetradecylsulphate, were investigated. The main method used in this thesis was rheology, through it were investigated prepared hydrogels based on chitosan and tensides and also prepared microgels based on N,N,N-trimethylchitosan and tensides. The interactions between polymers and tensides have been proved.
|
guest ::
RSS feed.