|
| |
|
|
Design of Data Acquisition Equipment IMC Fastening System in the Car
Černý, Martin ; Jeník, Radomír (referee) ; Ramík, Pavel (advisor)
Devices for measuring the dynamic load and vibration of certain parts of the bodywork or parts of other parts of the vehicle are made using accelerometers and measuring instruments IMC. It must be simply installed into the interior of the vehicle so that it is not necessary to remove any parts of the interior and to avoid damage to all parts of the interior. The preparation must also withstand the considerable dynamic load generated by the harder operation tests.
|
|
|
Concept of Autocross Racing Car
Dobrovolný, Ondřej ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
Diploma thesis deals with the design and simulation of torsional stiffness of the frame for autocross racing car. The design put emphasis on observe the regulations of international automobile federation and the result of torsional rigidity and weight. The first part focuses on the design of vehicles for autocross and its regulations. The main part is the structural design of the frame, following with simulation analysis using finite element method and computing torsional stiffness. In conclusion, results are evaluate and referred for further development.
|
|
|
Study of Model Parameters Influence on Vehicle Insurance Impact
Šandera, Petr ; Svída, David (referee) ; Ramík, Pavel (advisor)
The diploma thesis deals with basic test procedures conducted by companies Euro NCAP and RCAR. It focuses mainly on insurance impact and describes the creation of a model, simulation and crash on barrier. Moreover, it explores the influence of change of yield strength, thickness and hardening of material of energy-absorber on simulation of insurance impact, especially the amount of absorbed energy by energy-absorber.
|
|
|
Design of Formula Student Car Wheel Carriers
Chlud, Martin ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
Master’s thesis focused on design and construction of front uprights for Formula Student racing car. Topology optimization and FEM analysis will be used to design the uprights with higher stiffness and minimal weight difference compared to the last model. In the FEM analysis loads will be applied from wheel side and from suspension side. Design of the upright then will be compared to the previous designs especially to safety factor, weight and cost.
|
|
|
Design Proposal for the Switching Mechanism of a Tourist Car Headlamp
Škývara, Tomáš ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
The purpose of this thesis was to create proposal of mechanism for the tourist shutter, which could replace the original solution for projector currently used by Visteon-Autopal. The thesis was focused on background research of known solutions and proposal of new mechanism. The proposal was processed from mechanical site at first. All proposals were created to get inspiration before final design of tourist shutter for projector.
|
|
| |
|
|
Electric Car Vertical Door Opening System Design
Kolečář, Tomáš ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
Cílem této diplomové práce je výběr vhodného mechanismu automatického otevírání dveří pro elektromobil kategorie EU L7e. Pomocí analýzy dostupných řešení na trhu jsou k bližšímu zkoumání zvoleny tři koncepty. Klíčové prvky nejvhodnějšího mechanismu jsou navrženy s ohledem na silové působení včetně volby vhodného typu aktuátoru. V závěru práce je sestava zhodnocena s ohledem na předem zadané uživatelské požadavky.
|
|
|
Design Solutions and Development Trends of Formula Student Cars
Adámek, Ladislav ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis is engaged in history and description of progress and recent trends in Formula Student/SAE competition. The bigger part of this thesis is devoted to complex summary of structural designes of monoposts and construction units of most succesfull teams. The point of this survey was getting information about construction of competitor´s cars. Theese informations should be used for building own car.
|
|
|
Formula Student Front Wheel Hub Carrier
Lněnička, Martin ; Svída, David (referee) ; Ramík, Pavel (advisor)
This thesis deals with assessment front wheel carrier of Formula Student. It contains various ways assessment and suspension of wheel formula and a car. The main contens is production of drawing documentation parts the Formula Student front wheel hub carrier. The next is realization of calculated the durability bearing to soft journey of straight on the roadway.
|
guest ::
