|
|
New Building of apartment house
Navrátilová, Vladimíra ; Navrátil, Michal (referee) ; Kolář, Radim (advisor)
The bachelor thesis is a project of a new building of apartment house, The new building is determined for living and services. It is situated in a flat parcel. It is design as a three floors non-basement. The designed from the system Porotherm. The ceiling structure is made of concrete prestressed slabs. Form building is an oblong. Roof structure is designed as a flat roof.
|
|
|
Arduino weather station
Navrátil, Michal ; Michl, Antonín (referee) ; Šoustek, Petr (advisor)
The aim of this bachelor thesis is to build remote, solar powered weather station using Paricle platform. Weather station consists of Photon module, solar panel, sensors to measuring the temperature, pressure, humidity and speed of wind and of the webserver. Sensors are conected directly to the Photon module, which reads data from sensors and sending them over wifi to the webserver, which writes data simultaneously to the SQLite database and to Google Sheets. Current and historical data with charts are accessible from database, web interface or directly in Google Sheets.
|
|
|
Fire station, Svitavy
Navrátil, Michal ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis elaborates the project documentation for the construction of a new apartment of central fire station type C1 with the administrative part of the Territorial Department. The fire station is technologically linked to the second building SO.02 the technical and technological background of the fire station. The building is situated on the eastern edge of Svitavy. The building is non-cellular, it has three floors and a flat green roof. Three floors fulfilling matter with mainly administrative function is connected with two floors blocks fire station with an indoor gym. Above the floor containing garages for emergency vehicles facilities for the emergency unit are placed with a curtain that creates fading of the emergency door. The matter of the gym is optically separated from the station and highlighted with a volume narrow neck and height elevation. In the station there are training places and places for general physical preparation. The buildings are located in a sloping terrain. The ground fire station has a heliport. The establishment supporting columns of the building are for made of prefabricated calyx, and are concreted into monolithic foundation pads. Infill wall vertical bearing and non-bearing structures are designed from clay blocks type THERM. The bearing system is reinforced concrete prefabricated frame. Horizontally bearing structures are designed from prestressed hollow core slabs. The building envelope is made of a curtain wall in dark grey and red combined with a light contact thermal insulation system used on the indoor gym. The envelopes are in the administrative part and the part of the station divided by a glazed area. In the workshops and technology room the envelope is divided by lamellae. Usually there are 13 firemen during one shift, in three shifts there work 39 firemen all together. There are supposed to be 17 employees in the administrative department.
|
|
|
Apartment house Polička
Vápeníková, Renáta ; Navrátil, Michal (referee) ; Petříček, Tomáš (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a new building of a residential building in Polička. The building is designed as a partially basement with four floors. The last residential floor is receding. In total, there are 14 residential units in the apartment building, of which 12 are 3+KK units and 2 units on the fourth floor are VIP apartments with spacious balconies. Each apartment unit is equipped with a balcony. The building is based on plain concrete foundations. The horizontal structural system consists of reinforced concrete monolithic structures. The vertical system in the underground floor is made of lost formwork. The above-ground part of the building is made of brick. The roofs are partly vegetated in place of the terraces on the last floor. The remaining roof areas are fully vegetated. The bachelor thesis also includes a basic assessment in terms of building physics and fire safety design.
|
|
|
Project Defence Timekeeping System
Navrátil, Michal ; Crha, Adam (referee) ; Růžička, Richard (advisor)
Goal of this thesis is to design and assemble ethernet module for time measuring panel containing watch and stopwatch which will provide network interface to this panel and will power it through ethernet. One of requirements was to develop a control application for microprocessor controlling watch and stopwatch which loads time via this module from the internet and it sets the watch. Stopwatch is controllable via network through control application which was created as part of this thesis. For this purpose there was created a server running on the microprocessor which interacts with control application. Executables of control application are generated for operating systems Windows and Android. It is easy to run it on Linux as well. Contribution of this thesis is possibility to easily track time from the pc or the phone where student and examiner will have a precise information about time.
|
|
|
Polar ferrocene phosphines with nitrogen-containing linkers
Navrátil, Michal ; Štěpnička, Petr (advisor) ; Dostál, Libor (referee) ; Horáček, Michal (referee)
Title: Polar Ferrocene Phosphines with Nitrogen-Containing Linkers Author: RNDr. Michal Navrátil Supervisor: prof. RNDr. Petr Štěpnička, Ph.D., DSc. Abstract: This Ph.D. thesis describes three series of bridged ferrocene phosphines derived from aminoferrocene. The first series is comprised of homoannular α- and β-aminophosphines 1-3. The α-aminobis(phosphine) 1 was synthesized from aminoferrocene and (diphenylphosphino)- methanol via phospha-Mannich reaction in a 87% yield. This product was formed regardless of the reaction stoichiometry. Later, ligand 1 was utilized as a ligand for group 10 and 11 metal ions. With group 10 metal precursors, the ligand afforded five different square-planar complexes [MX2(1-κP)] (M/X = Ni/Cl, Pd/Cl, Pd/Br, Pd/I, Pt/Cl). In contrast, the complexes of group 11 metals showed varied geometry around the metal centre, ranging from a linear arrangement in [Au2Cl2(1-κP)], cyclic structure in [Au2(1-κP)2][SbF6]2 and tetrahedral arrangement in [M(1-κP)2][X] (M/X = Cu/BF4; Ag/SbF6; Au/SbF6). The cyclic voltammetry measurements suggested that Fe(II) oxidation is the first oxidation process. The attribution was corroborated by DFT calculations of 1 and [PdCl2(1-κP)]. To obtain the analogous monophosphine 2, aminoferrocene was N-methylated prior to the phospha-Mannich reaction. Subsequent...
|
|
|
Apartment house Polička
Vápeníková, Renáta ; Navrátil, Michal (referee) ; Petříček, Tomáš (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a new building of a residential building in Polička. The building is designed as a partially basement with four floors. The last residential floor is receding. In total, there are 14 residential units in the apartment building, of which 12 are 3+KK units and 2 units on the fourth floor are VIP apartments with spacious balconies. Each apartment unit is equipped with a balcony. The building is based on plain concrete foundations. The horizontal structural system consists of reinforced concrete monolithic structures. The vertical system in the underground floor is made of lost formwork. The above-ground part of the building is made of brick. The roofs are partly vegetated in place of the terraces on the last floor. The remaining roof areas are fully vegetated. The bachelor thesis also includes a basic assessment in terms of building physics and fire safety design.
|
|
|
Detached house with a workshop
Tesař, Ondřej ; Navrátil, Michal (referee) ; Petříček, Tomáš (advisor)
The aim of bachelor´s thesis is to elaborate the project documentation for realization of new detached house with a workshop. The new building is situated on the edge of the built-up area of the town Velké Pavlovice in the Břeclav district. It is a two-storey, basement and free-standing building. The building is divided into two functional parts, a living area and a design office. The detached house is designed for permanent housing for a five member family. The plan of the building is irregular shape, resembling an inverted letter L. The detached house is based on plain concrete strip foundations. The vertical load-bearing structures in the basement are made of reinforced concrete monolithic structure. The above-ground part of the building is masonry. The horizontal construction systém is made of reinforced concrete monolithic structure. The building covering constructions are designed as non-walkable, vegetation and walkable flat roofs. The building is thermal insulated with a ventilated facade partly with timber cladding.
|
|
|
Mixed-use building
Ondrová, Martina ; Navrátil, Michal (referee) ; Petříček, Tomáš (advisor)
The subject of my bachelor's thesis is project documentation for construction of a new mixed-use building in the town of Slušovice. The building has a partial basement, and four floors. In the basement there is a utility and a cleaning room, a storage space and a bike shed. On the first floor, there are two office spaces with separate entrances and a stroller storage. The second and third floors are identical, with three residential units on each. The fourth floor consists of two residential units. Each of the apartments has at least one balcony. All apartments are accessible from a single central staircase and an elevator. The building has its own parking lot with sufficient capacity on the property. The flat single-skin roof is insulated with polystyrene foam in several layers and loaded with a layer of aggregate. The vertical construction system is made of THERM ceramic blocks. The perimeter cladding is insulated with the ETICS contact thermal insulation system with facade expanded polystyrene. The horizontal load-bearing structures are made of a monolithic reinforced concrete slab. The perimeter walls in the basement are designed as monolithic reinforced concrete. The building is based on reinforced concrete foundation strips. The bachelor's thesis contains project documentation for this construction.
|
|
| |
guest ::
RSS feed.