|
|
Systematic approach for medical waste-to-energy processing
Hanus, Jan ; Krejčí, Tomáš (referee) ; Krňávek, Martin (advisor)
This master thesis deals with the current situation of medical waste management in the Czech Republic and available medical waste treatment methods. The first part summarises the legislation of waste treatment and contains an analysis of the current situation of medical waste management in the Czech Republic and comparison to the situation in the European Union. The second part describes medical waste treatment methods and following technologies for energy utilization when thermal treatment method is applied. In the main part of this thesis, a complex medical waste-to-energy system in a model region is designed according to the input data. The design includes description of the collecting and transportation system of the waste, capacity of the unit and suitable thermal treatment and heat utilization technology choice. A calculation model is created for the proposed unit and based on this model, an analysis on energy utilization effectivity is made. As a result of the thesis, environmental, technical and economical assessment is created based on the estimation of the investment and operating costs.
|
|
| |
|
|
Up-to-date off gas cleaning system for Medical Waste-to-Energy units
Kotas, Dan ; Krňávek, Martin (referee) ; Krejčí, Tomáš (advisor)
This master's thesis deals with current situation of medical waste management in the Czech Republic and it also analyzes the quality of existing units for thermal treatment of the medical waste. In the second part of the thesis, available off-gas cleaning methods were described as well as the emission limits for waste incineration, which correspond to the legislative regulations effective in the Czech Republic. These emission limits are considered as input data for off-gas cleaning system design. In the main part of this thesis, two technological solutions of off-gas cleaning methods for Up-to-Date medical waste incineration unit were designed. The unit is designed for energy utilization of 1400 tons of medical waste accumulated during one year in a regional hospital of model region. From given input parameters, two appropriate apparatus concepts were created. After that, both concepts were evaluated either form energetic point of view as well as from material one. From these evaluations, key apparatuses of both concepts were designed which provided necessary design dimensions for further investment price estimation of each individual key apparatus. In the conclusion of this thesis, the best solution of an off-gas cleaning method was picked according to the comparison of operating and investment costs.
|
|
| |
|
|
Reduction of nitrogen oxides in flue gas on special catalysts
Vávra, Jan ; Krejčí, Tomáš (referee) ; Jecha, David (advisor)
The diploma thesis is focused on experimental reduction of nitrogen oxides on special catalysts. The latest and state-of-the-art flue gas cleaning technologies are used. Selective catalytic reduction results in the desired level of pollution. It is necessary to meet the prescribed emission limit. A ceramic honeycomb filter based on vanadium and titanium is used as the catalyst. The entire measurement is carried out on the experimental INTEQ II unit, which is installed in the flue gas cleaning laboratory at NETME Center. It is shown which operating parameters achieve better efficiency of flue gas cleaning. Comparison of the BASF and CERAM catalysts is also performed. Finally, a material balance of the system is performed and a new external electric heater is designed to accelerate the heating process.
|
|
|
Reconstruction of overhead power lines 110 kV
Krejčí, Tomáš ; Vašíček, Martin (referee) ; Lázničková, Ilona (advisor)
The master’s thesis deals with the topic new isolation lines of 110 kV. The aim is to propose new insulator hangers. The first, theoretical part focuses on the development of insulators, cutting and possibilities of application. They are the different materials that are used for the production of insulators HV, advantages and disadvantages long rod and cap and pin insulators. There are also described insulator hangers. The theoretical work is to describe thefittings for overhead transmission lines, which are, used to construct a insulator hanger. The last part of the theoretical work is intended distribution towers for overhead lines HV. The practical part deals with the design of new insulator suspensions for specific lines of 110 kV. The results are drawings newly designed hangers and a list of materials (fittings) for individual towers and the total amount of material. The practical part is calculating the differences in the conductor sag using old and new insulators hangers.
|
|
|
Co-incineration sewage sludge in the existing plant
Krejčí, Tomáš ; Ferdan, Tomáš (referee) ; Frýba, Lukáš (advisor)
This thesis focuses on problems with co-incineration of sewage sludge in existing plants. The introduction of my thesis deals with a brief summary of a sludge management, sludge treatment methods and subsequent utilizations methods used for sledge disposal. Next chapter contains a calculation of calorific value, depending on the water content and volatile substances in dry solids of the sludge, it offers an overview of devices applicable for thermal processing of sludge and a description of the co-incineration in existing plants. The seventh chapter is devoted to the legislative parameters which influence the ways of dealing with sewage sludge. After the thermal treatment of sludge it is necessary to decontaminate flue gases of harmful substances resulting from incineration process, thus following there is a description of the most important devices used for its elimination or its reduction. My work ends with a search of methods dealing with the thermal sludge utilization in foreign countries.
|
|
|
Lubrication of gasoline and diesel engines
Krejčí, Tomáš ; Vaverka, Michal (referee) ; Křupka, Ivan (advisor)
The main subject of this bachelor’s thesis is describing the present state of knowledge in the sphere of compression-ignition and spark-ignition engines lubrication, lubricants and future trends. First part is about internal combustion principle, engine construction. Next parts are about engine lubrication system, lubricating modes, and its locating in the engine. Last part is about oils, and insights into the future.
|
|
| |
|
|
Structural changes in the support phase of the step under the influence of increasing load using pressure shoe insole
Krejčí, Tomáš ; Šťastný, Jan (referee) ; Korvas, Pavel (advisor)
This bachelor thesis deals with the structural changes in the support phase of the step under the influence of increasing load. The measurements are provided by the "Medilogic WLAN insole" system, which can be used to perform static and dynamic pressure measurements on the feet using pressure sensors. In the theoretical part, information concerning the development of the lower limb, especially the leg and foot, and their anatomical structure is described. The biomechanics of gait is also described, including the main phases of the gait cycle. In the practical part of the thesis, the measurement methodology is described, including the instrument setup and the aids used during the measurements. Furthermore, the data processing procedure and its final analysis are presented.
|
guest ::
