|
|
Horizontal driven roller conveyor
Sláma, Jakub ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with design-driven horizontal roller tracks for the transport of steel castings in the interoperation internal transport, was made functional calculation of the roller track and determined the main dimensions of lines, the work deals with designing the drive, strength calculation poháněcího chain and check the frame lines. Subsequently, the preparation of its finished drawing lines, assembly lines and drawing section drawing of the drive subassembly lines.
|
|
|
Design of manipulator for palletization
Florián, Michal ; Pochylý, Aleš (referee) ; Kubela, Tomáš (advisor)
The matter of this master´s thesis is the construction of two variations of manipulator for palletization. The first solution is the derrick manipulator; the second one is the gantry manipulator. The aim of this master´s thesis is the comparison of both solutions from the point of view of the applicability, the cost and the demandingness of production. The productinon documentation will be elaborated for the selected solution.
|
|
|
Mechanical cleaner-machine
Čejda, Robert ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of my diploma thesis is to design a construction of a mechanical fine rack cleaner machine including an appropriate design of gear mechanism and its attachment to the frame. The cleaner machine is located in the inflow system of a turbine in front of the object of small hydro power station. The design of the construction of the cleaner machine will be based on a drawing documentation and a report with needed analytic and FEM calculations.
|
|
|
Motor-driven roller conveyor
Seďa, Marek ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
Baccalaureate work deal with conceptual proposal powered motor-driven roller conveyor longitude 15 m, that the will transport cast given to proportions for either seats overleaf. Work is bent on calculation principal dimensions, solidity verification and generally general proposal constructional solving conveyor. Is free time type roller for transport casts saved on pallets, drive track, which will elect electric motor with gear - box. Last but not least also chain gearthat the to us will serve as driving element rollers. Baccalaureate work would had contribute by firms, companies and subjects, that the derive benefit from roller conveyor for transportation materials. She should enrich constructional possibilities solving these arrangements.
|
|
|
Design of automatic feeder of movable shelfs of storage system SSL LogiMat
Stoklásek, Tomáš ; Dlesk, Daniel (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is automatic movable shelves feeder design. the feeder is part of vertical lift storage system Logimat Total weight of movable shelf is 760 kg. The technical report contains feeder design calculation, feeder’s main parts strength calculation and the design of the way of picking the movable shelf from the storage lift. The report also contains feeder’s frame strength analysis using finite element method and sensor design for motion control.
|
|
|
Design of the elevator drive for storage system LogiMat
Dosedla, Milan ; Hava, Jiří (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with the design of the new elevator drive for storage system Logimat. Diploma is focused to design a new drive for a load up to 1200 kg and to adapt the elevator frame to the new drive design. In the first part is done research for suitable drive systems. There are followed by design and stress analysis. The second part deals with appropriate roller chain parameters calculation and the power output of electric motors.
|
|
|
Wall crane
Zbořil, Michal ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
Bachelor´s thesis focuses on construction design of a wall-mounted jib crane with lifting capacity up to 800kg, an outreach of 3500mm and lifting height of 5000mm. Thesis describes selection of trolley and crane hoist based on the current market offer. It includes a description of own design for the rotation mechanism of the crane using planetary gearbox and roller chain. It furthermore includes crane design and strength calculations according to valid norms. Technical documentation of assembly and weldment of cantilever is attached to this thesis.
|
|
|
Design of automatic feeder of movable shelfs of storage system SSL LogiMat
Stoklásek, Tomáš ; Dlesk, Daniel (referee) ; Škopán, Miroslav (advisor)
The aim of this thesis is automatic movable shelves feeder design. the feeder is part of vertical lift storage system Logimat Total weight of movable shelf is 760 kg. The technical report contains feeder design calculation, feeder’s main parts strength calculation and the design of the way of picking the movable shelf from the storage lift. The report also contains feeder’s frame strength analysis using finite element method and sensor design for motion control.
|
|
|
Design of the elevator drive for storage system LogiMat
Dosedla, Milan ; Hava, Jiří (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with the design of the new elevator drive for storage system Logimat. Diploma is focused to design a new drive for a load up to 1200 kg and to adapt the elevator frame to the new drive design. In the first part is done research for suitable drive systems. There are followed by design and stress analysis. The second part deals with appropriate roller chain parameters calculation and the power output of electric motors.
|
|
|
Design of manipulator for palletization
Florián, Michal ; Pochylý, Aleš (referee) ; Kubela, Tomáš (advisor)
The matter of this master´s thesis is the construction of two variations of manipulator for palletization. The first solution is the derrick manipulator; the second one is the gantry manipulator. The aim of this master´s thesis is the comparison of both solutions from the point of view of the applicability, the cost and the demandingness of production. The productinon documentation will be elaborated for the selected solution.
|
guest ::
