|
|
Static provision of baroque church
Kadlec, Jaroslav ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master´s thesis solves a static provision of the Baroque church of Saint James in Městečko Trnávka. The church was built in 1752 in Baroque style on the place of the original Romanesque church. It is a single-nave building with dimensions of about 46 × 20 m. The nave is followed by a massive square tower with a height of about 34 m. The reason for the restoration of the church are cracks in the external masonry and arch due to small space stiffness. The building will be reinforced by horizontal and transverse prestressing. They are designed prestressing tendons, called monostrands, using method of alternative cable channels. It will help to avoid other derformations and it will increase a stiffness of the structure.
|
|
|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
|
Structure of Heat Resistant Steels
Skýba, Pavel ; Foret, Rudolf (referee) ; Jan, Vít (advisor)
This work is a compilation essay about structure of heat-resistant steels, creep, strengthening and heat treatment based on available literature sources. The main chapters of the work deal with creep deformation, its mechanisms and the ways of strengthening used in heat-resistant steels. Separate chapters deal specifically with precipitation strengthening, minority phases that can be found in heat-resistant steels and their heat treatment.
|
|
|
Material nonlinear static response of civil structures
Kinclová, Radka ; Vlk, Zbyněk (referee) ; Nevařil, Aleš (advisor)
The aim of this bachelor’s thesis is the non-linear elastic and plastic response of the simple beam structures. Also the problematics of the plastic hinges development is adressed. This thesis will then describe the origin and magnitude of the residual stresses caused by welding. Ideal elastic-plastic behavior of materials and elastic behavior with strenghtening will be used to determine the limit load capacity of the simple structures and will be compared to solution in the ANSYS software.
|
|
|
Effect of strength training in improving range of movement.
Hradcová, Veronika ; Malá, Jitka (advisor) ; Šorfová, Monika (referee)
Title: Effect of strength training in improving range of movement - a systematic review Objective: The aim of this diploma thesis is to find answers to research questions in a form of systematic review and to evaluate if strength training has effects on improving range of movement, or if it restricts it or if it doesn't affect it at all. This systematic review also aims to find out how many researchers are inclined to these individual influences of strength training. Method: The Google scholar, PubMed and Web of Science databases were selected for the study search, in which 140 studies were found on basis of established criteria, which were complemented by 4 studies from other sources, from which 128 were subsequently obtained after removing duplicates. An abstract of these studies was studied, of which 95 studies were unsuitable and were therefore excluded. The remaining 33 studies were further studied and, if they met the criteria of at least one research question, were subseqently included in present review. A total of 18 studies were included in present review, which were further classified into research questions according to additional criteria. For each research question, the studies were evaluated separately and the results of the studies were clearly recorded in a table for subseqent...
|
|
|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
|
Effect of 6-months exercise program and a diet modification on body composition and posture of overweight middle-aged man
Železný, Vít ; Daďová, Klára (advisor) ; Majorová, Simona (referee)
Title: Effect of 6-months exercise program and a diet modification on body composition and posture of overweight middle-aged man Objective: The main objective of this work is to verify the effectiveness of an individual, strenght-focused intervention program on body composition and posture in overweight person without previous exercise experience. Methods: Bioelectrical impedance analysis (BIA) was used to determine the body composition. As a complement to this method, waist circumference was measured. To determine the postural stereotype, method of Klein, Thomas and Mayer was used. Rough assessment was also performed by selected functional tests and basic posture analysis conducted by a physiotherapist. All measurements were made before and after the program. The training program was performed as a circuit training during the first month (2 times a week). In the following months strenght training in series (3 times a week) was performed, supplemented with low intensity aerobic exercise. Results: After 6 months of intervention, changes in body composition were detected, showing a 5% loss of adipose tissue and a total body weight reduction of 9.6 kg. This was confirmed also by a considerable reduction in the waist circumference. The effect of the intervention program has also largely manifested...
|
|
|
Case Study of Physiotherapy Treatment of a Patient with the Diagnosis of Total Hip Replacement
Papageorgiou, Chrystalla ; Vomáčková, Helena (advisor) ; Kratochvílová, Pavla (referee)
The abstract of my study concerns the treatment of the case of my patient who had an operation of total hip replacement on the right hip joint, caused by post dysplastic arthrosis. My practice was performed at Fakultni Nemocnice Kralovske Vinohrady. Physiotherapy program started on Tuesday 29th of January 2013 and ended on Friday 1st of February 2013. My Bachelor Thesis is divided in two parts: 1) Theoretical part 2) Practical part. In the theoretical part I analyse everything concerning the hip joint, muscles, joints, bones, ligaments, nerves as well as the biomechanical and kinesiological point of view of the hip joint. In the practical part I analyse every procedure I have done with my patient, all the examinations, conclusions, therapies and results. The patient was operated at OTK FNKV hospital at 22nd of January. Goals of the therapy was to decrease pain and edema, increase range of motion of the movement, increase mobility and elasticity of skin and also improve strength of the operated right hip according to the examinations I provided to the practical part. After the five sessions improvements were detected in the final kinesiologic examination. Pain was decreased to 3/10 according to VAS scale, edema was reduced, range of motion (ROM) of the movements and muscle strength were also...
|
|
|
Static provision of baroque church
Kadlec, Jaroslav ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master´s thesis solves a static provision of the Baroque church of Saint James in Městečko Trnávka. The church was built in 1752 in Baroque style on the place of the original Romanesque church. It is a single-nave building with dimensions of about 46 × 20 m. The nave is followed by a massive square tower with a height of about 34 m. The reason for the restoration of the church are cracks in the external masonry and arch due to small space stiffness. The building will be reinforced by horizontal and transverse prestressing. They are designed prestressing tendons, called monostrands, using method of alternative cable channels. It will help to avoid other derformations and it will increase a stiffness of the structure.
|
|
|
Structure of Heat Resistant Steels
Skýba, Pavel ; Foret, Rudolf (referee) ; Jan, Vít (advisor)
This work is a compilation essay about structure of heat-resistant steels, creep, strengthening and heat treatment based on available literature sources. The main chapters of the work deal with creep deformation, its mechanisms and the ways of strengthening used in heat-resistant steels. Separate chapters deal specifically with precipitation strengthening, minority phases that can be found in heat-resistant steels and their heat treatment.
|
guest ::
