National Repository of Grey Literature 26 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
The Energy of a Flying Object Necessary for Damaging the Vehicle Windscreen
Havlík, Ondřej ; Tylšar, Vladimír (referee) ; Bradáč, Albert (advisor)
The theoretical part of the thesis entitled "The Required Energy of a Flying Object to Damage a Windscreen" covers the historical development of glass as a raw material and its further use as a key material for the automotive industry. In the following chapters, the thesis provides an analysis of a windscreen in general including the material composition of various windscreen manufacturers, the distribution according to the accessories used in the windscreens, and the various options of placing a windscreen in a car bodywork. The homologation of a windscreen and the procedure for replacing or repairing a windscreen after a damage is also covered. Lastly, the experimental part of the thesis describes the process of testing the required energy of a flying object to damage a windscreen.
Study of rehabilitation of the selected part of the sewer network
Novák, Tomáš ; Malaník,, Stanislav (referee) ; Raclavský, Jaroslav (advisor)
The aim of this diploma thesis is a rehabilitation study of the sewer network on Vídeňská street in the city of Brno. The first part of the thesis includes an accompanying review including basic data about the sewage gutter, including the characteristics of the affected area with a detailed description of the geological and hydrogeological rates. This is followed by a technical review, which consists of hydrotechnical calculations and overal summary of the construction-technical condition. The subject of the following part is a proposal and description of several varying solutions for the rehabilitation, including, particularly, trenchless technologies. Further on, all of the proposed variants are evaluated based on technical, economical and environmental impact. Finally, all the observations are summarized and a final recommendation for the way of solving the rehabilitation is carried out.
Activation admixtures in concrete
Eger, Lukáš ; Hela, Vlastimil (referee) ; Hela, Rudolf (advisor)
The aim of my bachelor´s work is the summarization and focus on admixure concrete,and the active and inert admixure, which have some positive characteristies for fresh and hardened concrete. Theoretically, I tried to study the increase of their joining potential while this characteristic can be used by either chemici or mechnical way, their combination as well. I also Works on evaluetion of physically mechanical influence for fresh and hardened concrete that can up to 60 days old while the cement was partly substituted by admixure of different character.
Octave and Matlab comparison in terms of basic mathematics
Zahradník, Radek ; Grepl, Robert (referee) ; Krejčí, Petr (advisor)
How is mankind grow older, its knowledge about nature, which in it lives, is getting deeper. Unfortunately human brain in itself became short for solving modern problems and we have to help ourselves with computers and modern computerised methods. But computers themselves can not solve the problems. We need to equip them with adequate software. Goal of this work is to compare Octave and Matlab systems in part of compatibility and in the solvings of practical problems.
Research of effective use and activation of activ concrete additions
Mikhailova, Olesia ; Ťažký, Tomáš (referee) ; Hela, Rudolf (advisor)
The theoretical part describes the admixtures that are used in cement replacement. Here also summarizes the findings on the influence of granulomentry, grain shape and fineness of admixtures on the density of the cement matrix. The practical part is experimentally verified the influence of fineness admixtures and grain size on the mechanical properties of concrete. Also, the rheological properties of cement are compared with admixtures depending on the type and dosage and time.
Utilisation of innovative materials at design of vertical lathes
Augustin, Petr ; Novotný, Lubomír (referee) ; Marek, Jiří (advisor)
In my thesis, I have chosen to concentrate on the replacement of traditional materials by more unconventional ones. My aim is thus to pay attention to theoretical and practical implications that such replacement would induce and to evaluate the pros and cons of such practice. I am going to fucus on the Hulin-located company TOSHULIN which produces vertical lathes.
Optimization of the lifecycle transformer 110/22 kV
Suk, Jiří ; Radil, Lukáš (referee) ; Krbal, Michal (advisor)
The aim of the thesis is to describe the situation in transformation 110/22 kV in distribution area E.ON East. Next to describe the current practice in the replacement of 110/22 kV transformers and mention the possibilities of replacing the machines at the end of their lifecycle with respect to the development of the load of the individual transformer stations in the distribution area. An integral part of the thesis is also the economic evaluation of premature replacement of transformers from two different perspectives. The next point is to look at the current possibilities in the lifecycle lengthening of these devices and to suggest a method for monitoring the state of paper insulation to estimate the remaining lifetime of the transformer. The last point is the evaluation of the transition of a significant customer from a voltage level of 22 kV to a voltage level of 110 kV, including related technical and economic issues.
Milling of pre-sintered ceramics using CAD / CAM
Ščasnovič, Erik ; Pouchlý, Václav (referee) ; Kaštyl, Jaroslav (advisor)
Diploma thesis is focused on determination of proper pre-sintering temperatures of zirconia ceramic blanks intended for CAD-CAM milling. Functional properties of milled and sintered samples are also discussed. Experimental part is aimed on determination of properties of blanks which affect directly the CAD-CAM process. Another solved issue is definition of mechanical and physical properties of sintered bodies. Final properties are compared with properties of ceramic blanks made from standard ceramic powder. Dental crown, dental three-unit bridge and partial knee joint were prepared successfully. The tests of geometric accuracy were performed on dental crown as well as on partial knee joint replacement with using 3D scanner.
Concrete with fly ash for XF3 and XF4
Máša, Jiří ; Ťažký, Martin (referee) ; Hela, Rudolf (advisor)
This bachelor thesis deals with concrete using fly ash as an active ingredient for environment XF3 and XF4. Bachelor thesis is divided into two parts. The first, theoretical part, is focused on basic information on power generation of fly ashes and solves the existing knowledge about concrete with partial asphalt replacement and then evaluates their properties both in fresh and condensed state. Below are the world-wide knowledge of the behavior of these concrete. The second part deals with the experimental verification of these findings contained in the theoretical part. The aim of this work is to verify the durability of concrete with fly ash for XF3 and XF4 environments.
Replacement of directives with regulations on the example of legislation concerning protection of personal data within the EU
Suchanová, Kateřina ; Svobodová, Magdaléna (advisor) ; Král, Richard (referee)
The objective of the master thesis Replacement of directives by regulations on the example of personal data protection legislation in the EU is to describe the process of simplification of EU legislation based on the study of relevant political and legislative texts, especially with emphasis on the process of replacing directives by regulations. The first part of the master thesis focuses on the development of the process of simplification of the EU acquis, and then on the analysis of regulations that have been adopted since the late 1980s, and which partially or completely replaced the regulation contained in the directives. Based on the analysis of the proposals and the preambles to the adopted regulations, the reasons for the replacement were subsequently specified. The reasons are further categorized and described. The main research question in this part of the master thesis was to determine whether the replacement of directives by regulations is an appropriate tool used to simplify European Union legislation, whether it eliminates problems that may arise during the implementation of directives governing the issue and what are the main reasons that are specified by the EU legislators as a justification for the adoption of a new replacement legislation. In the second part, the master thesis...

National Repository of Grey Literature : 26 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.