|
|
Wireless data logger for environmental monitoring - server-side
Bártek, Jiří ; Kolářová, Jana (referee) ; Sekora, Jiří (advisor)
This work describes the design and implementation of the server-side component, which is part of a comprehensive task for measuring temperature in medical storage spaces and sending the measured temperature at specified time intervals. The created device will receive the measured data and subsequently send it to an e-mail address. The introductory part deals with the legislation related to the storage of medicines and further provides the reader with theoretical information about the used devices and protocols. The next section of the work introduces the implementation of the device and software solution. The outcome of the work is a device capable of communicating with another microcontroller and sending the received data to a selected e-mail address for subsequent archiving.
|
|
|
Design and developement of autonomous system for monitoring critical paramaters in food industry
Chovan, Hynek ; Formánek, Martin (referee) ; Krejčí, Petr (advisor)
his work focuses on automating the monitoring of temperature and other operational parameters in gastronomic establishments. The designed device allows real-time monitoring of temperature, humidity, and other parameters with remote access capability. It utilizes the ESP32 microcontroller, SHT40 and HX711 sensors, and TP4056 charging circuit with DW01A protection circuit. Data is transmitted to a Gateway device, which displays it through a web interface. Testing demonstrated sufficient communication range and long battery life. The device meets requirements for compactness, reliability, and efficiency. This project represents progress in IoT applications for ensuring food safety and efficiency in handling food in gastronomic establishments.
|
|
|
Stopwatch for measuring of sports events
Tajč, Martin ; Petržela, Jiří (referee) ; Hruboš, Zdeněk (advisor)
The aim of this bachelor work is the construction of the electronic stop-watch for measurement at sports events. This stop-watch is primary designed for use at firefighters competitions. The first part of the work is focused on a flowchart of the stop-watch and an analysis of its parts. Some alternative methods, which could be used during the construction, are compared. In the following part, there is an algorithm for the microprocessor applied in it described and features of programming languages are briefly compared. Next in the text, there are a detailed user manual as well as a manual for executing of the display panel. In the supplement, particular electronic schematics and printed wiring boards are included.
|
|
|
Terminal for testing of data communication of public transport vehicles
Fiala, Michal ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
This term paper deals with subject of wireless communication of city rail transport cars. In this paper are described individual modules for transmission and receiving of data containing communication between city rail transport cars and measures of siding switches. Then there are discussed possibilities of design of system for testing functionality of transmitting and receiving modules and the system is consequently designed. There are also described communication principles and protocol used for wireless communication and MODBUS protocol used for communication over RS-485 serial line. In the end was the system manufactured, completed and equipped with necessary software.
|
|
|
Broadband services over power lines
Svoboda, Jan ; Martinásek, Zdeněk (referee) ; Stančík, Peter (advisor)
The Bachelor´s thesis is intend on assembly of basic informations from area of PLC systems. It envisages the modern problems in area of communication on the energy supply networks. By the aim is provide compact informations about particular areas of usage PLC systems – both in a household, an automatic exercises and in a possibilities of broadband. The first part of thesis includes the theoretical informations about PLC network. The second part considers by testing of basic parameters PLC network. Of all the made measurements are draw conclusions and valorize the usability of metering devices.
|
|
|
Fishing alarm in LPD band
Dufek, Ivo ; Šebesta, Jiří (referee) ; Frýza, Tomáš (advisor)
The main objective of this project is analysis, design and construction of three channel wireless extension box for electronics bite alarms in LPD band. Wireless ex-tension box set consist of transmitter and receiver. Both of them are based on Aurel hybrid modules and Atmel AVR microcontrollers. Microcontroller in transmitter media-tes processing input data, their coding, securing and transmitting. At the receiver side microcontroler has to interpret data from hybrid module and start correct visual and acoustic signalization. Construction of this extension box set is described in two independent chapters. The solution contains brief introduction, description of each function block, some im-portant components, general schematics, design of PCB and description of the firm-ware. The last chapter is common for transmitter and receiver and describes recom-mended antennas.
|
|
|
Simultaneous transmission of photonic services in fibre optics
Látal, Michal ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
Diploma thesis focuses on simultaneous transmission of selected photonic services by one single-mode optical fiber. The thesis deals with the problem of common transmission of multiple photonic services by one optical fiber using the wavelength division multiplex technology. Furthermore, the origin and influence of nonlinear phenomena accompanying the simultaneous transmission of photonic services are described. Except common data transmission with a bitrate of 10 Gbit/s, a common high-speed data signal transmission with a bitrate of 200 Gbit/s, accurate time transmission and high-power sensor signal are considered. During the aimultaneous transmission of selected photonic services, the measurement of the transmission parameters was performed for various variants of the simultaneous transmission arrangement. In particular, the influence of nonlinear phenomena and possible mutual interference of individual transmission channels at 50 and 100 GHz between signals was analyzed.
|
|
| |
|
|
Monitoring and Measuring of Power Quantities in Waterworks Facilities
Hála, Tomáš ; Pavelka, Tomáš (referee) ; Tichý, Vladimír (referee) ; Radil, Lukáš (advisor)
This Bachelor thesis deals with solution of an exact Smart metering problem. The goal of this thesis is to offer an electrical energy measurement innovation that deals with widespread waterworks objects maintained by Vodárenská a.s. Brno-venkov division. The paper contains an analysis of the current state of reading of electricity meters and the outlook on optimization. The paper also focuses on solving the smart metering problem and contains a description of individual layers of remote reading of electricity meters. The 2nd half of the paper focuses on the specific devices selection and design of data reading topology. An Economical analysis compares costs of project realization with possible savings with the help of chosen methods of financial analysis evaluates the economic effectiveness of an investment.
|
|
|
Implementation of smart water measurement technology into small municipal waterworks environment
Klučka, Tomáš ; Zubíček,, Vojtěch (referee) ; Ručka, Jan (advisor)
The diploma thesis describes the actual situation of smart water metering, an overview of water meters suitable for remote data reading and individual components for application of remote data transmission including transmission itself. The thesis also contains the characteristics of available wireless data communication technologies and detailed solutions according to two companies specializing in remote transmission of water meter data. Subsequently, the pilot projects of large water company are presented, including practical findings. The practical part deals with the implementation of smart water metering in three specific municipalities, including a description of the area of interest, water supply system specification and possible limitations, the recommended technology, the requirements for putting in into operation and the pricing of technology and services according to two specialized companies. Finally, the possibilities of other using of smart water meter technology are discussed.
|
guest ::
