|
|
Laboratory task dedicated to filters with switched capacitors
Čipl, Jan ; Šotner, Roman (referee) ; Petržela, Jiří (advisor)
This semestral thesis deals with the issue of analog frequency filters, their division and voltage transmission characteristics of filters. Furthermore, this work is focused on the description of filters operating on the basis of switched capacitances. This work also includes simulations, which are the first draft of a laboratory preparation for teaching. The simulations were performed in the Orcad Pspice program
|
|
| |
|
|
Power amplifier for 2 metres radio amateur transmitter
Klapil, Filip ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This work deal with development a solution of a power amplifier for 2 metres radio amateur transmitter with a minimum output of 1 kW. Part of the solution is to use a commercial module of power amplifier. In addition, the design of the input attenuator, the switching elements in the signal path, the output filter and the protection circuits including cooling. The bachelor thesis contains a proposal of a system solution with a discussion of required performance and legislative requirements. This is followed by a hardware section, where the work is devoted to the design of the hardware, the theoretical calculation of the components and the simulation. In the last part of the work deals with practical implementation, verification of function and measurement of achieved parameters and their evaluation.
|
|
|
DC/AC inverter with digital control
Štaffa, Jan ; Pazdera, Ivo (referee) ; Minárik, Vladimír (advisor)
This work is focused on single phase inverters, which are used for the conversion of the direct current to the alternating current and are nowdays used especially in systems of back-up power supply. The specific aim of this work is implementation of design hight power circuit of inverter include calculation of control algorithm. It describes the complete solution of power circuit. Next step is a analysis of problems concerning the digital control with help of signal processor which is used for solution of regulator structure. Check of the design and checkout of control algorithm is made in the form of simulation in the MATLAB Simulink. Debugged program algorithm is subsequently implemented into the signal microprocessor. The work results rate estimation functionality of inverter and solution of control algorithm.
|
|
|
Diagram Eye Imaging
Chýlek, Richard ; Kratochvíl, Tomáš (referee) ; Říčný, Václav (advisor)
The aim of this bachelor´s thesis was to design an adaptor for imaging the eye diagram of digital video signals in the basic zone. Adaptor is a device by which we can illustrate the signal distortion resulting from the passage through the transmission channel, using the XY displeying.This adaptor should be designed with the symbol timing recovery. This means that the adaptor has been divided into two parts. Part of the broadcast, which consists of a units generator timing signal, generator block and pseudorandom sequences. These blocks of me created a 127-bit sequence with different frequencies (2 MHz, 4 MHz, 8 MHz and 16 MHz). In the evaluation of the adaptor, which is composed of symbol timing recovery, frequency dividers, low pass filter and all-pass network for phase synchronization and adjustment signal amplifiers, the signal is divided into two branches. The first walked through a matching amplifier and led to vertical clamps oscilloscope. The second passes through progressively above districts and ultimately led to the horizontal clamp oscilloscope. The individual blocks were designed in detail and implementation schemes were drawn up for both of the adapter. From these themes, I then proposed a DPS for each of the adaptor. They were blocks of broadcast adaptor, evaluation of the adaptor, the blocks of resources and subpanel for two main blocks. The result of this work is complete documentation for the implementation of this adaptor. Direct implementation is not required.
|
|
|
Design of anti-aliasing filter for discrete-time delta-sigma modulators
Vogel, Vojtěch ; Háze, Jiří (referee) ; Kledrowetz, Vilém (advisor)
This work deals with the design of a second order anti-aliasing filter with a cutoff frequency in the order of hundreds of kHz using the switched capacitor technique. The use of this technique allows the design of accurate and tunable analog circuits without the use of resistors. In this work, the design of analog switches is described. Furthermore, the various circuits required for the design of the filter in the onsemi I3T80 technology are proposed.
|
|
|
ARC filters with modern active elements
Sedláček, Petr ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
The aim of this project is to compare the characteristics of low pass and high pass filters designed by various methods of synthesis. Firstly, the attributes and characteristics of filters and realisations of higher order filters using normed low pass filter and approximation of gain-magnitude frequency response are described and then used in application. The circuits that substitute coils directly or undirectly using the Bruton transform are discussed next. The practical part of project concerns of design of high pass and low pass itself, using two methods of synthesis. Proper real operational amplifier has to be choose for used frequency. In the final part of work the designed circuits were realized and their characteristics were measured and examined.
|
|
|
Adaptive antialiasing frequency filter
Sovadina, Václav ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
The aim of this project is to become acquainted with the Bessel approximation function and to present the possible connections of the adaptive antialiasing filter. Then, cascade and partition filter realizations are designed and their computer analysis are carried out. Furthermore, the thesis deals with the options of electronic realignment of filters. A common connection of digital potentiometer along with the block diagram of the whole mechanism are described. The next part presents a construction of the analogue part of the filter, measuring of its real characteristics and the control circuit for the analogue part.
|
|
|
Controllable Fractional-Order Analogue Electronic Circuits
Dvořák, Jan ; Vávra, Jiří (referee) ; Šimák, Boris (referee) ; Jeřábek, Jan (advisor)
Disertační práce se zabývá syntézou a analýzou nových obvodových struktur neceločíselného (fraktálního) řádu s řiditelnými parametry. Hlavní cíl této práce je návrh nových řešení filtračních struktur fraktálního řádu v proudovém módu, emulátorů prvků fraktálního řádu a také oscilátorů. Práce obsahuje návrh tří emulátorů pasivního prvku fraktálního řádu, tři filtrační struktury a dva oscilátory navržené na základě využití pasivního prvku fraktálního řádu v jejich obvodové struktuře a dvě obecné koncepce filtrů fraktálního řádu založené na využití aproximace přenosové funkce fraktálního řádu. Na základě obecných koncepcí jsou v práci navrženy filtry fraktálního řádu typu dolní a horní propust. Díky aktivním prvkům s přeladitelnými parametry, které jsou užity v obvodových strukturách je zajištěna řiditelnost řádu filtru, jeho pólového kmitočtu a některých případech i činitele jakosti. Vlastnosti všech zapojení jsou ověřeny počítačovými simulacemi za pomoci behavioralních simulačních modelů aktivních prvků. Některé z uvedených obvodů byly realizovány na DPS a jejich vlastnosti ověřeny experimentálním měřením.
|
|
|
Design of pseudo-differential frequency filters using conveyors
Hýl, František ; Langhammer, Lukáš (referee) ; Sládok, Ondřej (advisor)
This bachelor thesis deals with a second order pseudo-differential frequency filter operating in voltage mode. It also describes various types of frequency filters and their characteristics. It contains a summary of the differences between Pseudo-differential, fully differential and non-differential filters and their involvement. The pseudo-differential filter of the high-pass type is devoted to chapters of design, simulation and measurement.
|
guest ::
