|
|
Strength calculation of high-pressure steam piping according to EN 13480
Řezník, Dominik ; Pernica, Marek (referee) ; Létal, Tomáš (advisor)
The Master's thesis deals with the stress and strength calculation of a high-pressure steam piping system, which is part of the steam piping system of a waste-to-energy plant. In the theoretical part of the thesis, basic knowledge about stress and strength and piping systems (pipe support system, types of loads, fittings and other components) is summarized with respect to the used standards. Part of the theoretical section also includes one of the objectives of the thesis, which is to provide basic knowledge about the KKS codes. In the practical part, firstly, using the VVD software, the pipe class is calculated and created in order to design nominal thicknesses of all the pipes and fittings from the piping system. The core part of the work is the performance of the stress and strength calculation in the CAESAR II software, which includes the appropriate setting of the calculation model based on the calculated pipe class and the documentation from the customer, the selection of pipe supports and the adjustment of the pipelines based on the previous and ongoing results. As part of the calculation, the nozzle loads and support loads are also assessed and verified. In the last part of the work, a simplified FEM calculation of the dump-tube (transition component for steam discharge into the condenser) is performed in PRG NozzlePro software. All the modifications are continuously discussed and the results are then summarized.
|
|
|
Vehicle Hydropneumatic Unit
Koudelka, Roman ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
This diploma thesis, following the bachelor's thesis, is devoted to the gas-liquid unit of a vehicle, as the central element of hydropneumatic suspension. The aim is to dimension and construct this component and integrate it together with other elements into a complex suspension system. Based on possible forms listed in the research section, regarding to current development trends, the form of the unit is chosen. The practical part begins with simulations comparing a hydropneumatic with a conventional suspension system. After solving this issue, it is possible to proceed to the dimensioning of the basic parameters of the unit and then to its construction, respecting the relevant strength calculations. The last step is to build a conceptual design of the whole hydropneumatic suspension system.
|
|
|
Experimental validation of active flow control concept for automotive applications
Sobotka, Vojtěch ; Jebáček, Ivo (referee) ; Popela, Robert (advisor)
Tato diplomová práce obsahuje komplexní návrh systému aktivního řízení proudu instalovaného na osobním voze Škoda Roomster. Tato práce navazuje na výzkum provedený VUT a TUB na vozidle Volkswagen UP! Návrh lze rozdělit na tři základní části - návrh spoileru, návrh závěsů a návrh vyfukovacího systému. V každé z těchto částí je návrh detailně popsán a potřebná výkresová dokumentace je součástí práce v její příloze. Pro potřeby návrhu vyfukovacího systému bylo provedeno jeho testování. Výsledky testu jsou v této části uvedeny. Práce také obsahuje komplexní popis sestavení celého systému a jeho instalace na automobil.
|
|
|
Analysis of the condition of the K 220-44 steam turbine drainage pipeline and proposal of corrective measures
Horký, Jiljí ; Milčák, Pavel (referee) ; Šnajdárek, Ladislav (advisor)
This diploma thesis deals with the analysis of the drainage pipeline of the Škoda K 220-44 steam turbine. This turbine is operated in Dukovany Nuclear Power Plant. One part of this work is proposal of corrective measures. The aims of this work include the creation of a search for drainage, steam, erosion corrosion and mapping of defects in long-term operated drainage system. Work also includes the evaluation of measured values of the pipe wall thickness measured by ultrasonic analyzer. In addition, the work contains images created from 3D model, on which the location of defects and measurements are displayed.
|
|
|
Pressure losses in heating systems
Švanda, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.
|
|
|
Sanitary technical installations and gas pipeline in the apartment house
Polách, Petr ; Wierzbická, Helena (referee) ; Vaščáková, Alena (advisor)
The bachelor's thesis deals with the design of sanitary technical installations and a gas installations in an apartment house and with their connection to existing engineering networks. It also includes a design of a wastewater pumping facility to protect the underground rooms from the sewage flooding. It also includes a proposal for a light liquid separator, infiltration device and rainwater tank. The theoretical part is focused on gas main, fittings in gas distribution, gas pressure regulator and gas meters. Calculation and project part solves distribution of sewerage, water supply and gas pipeline in the specified object. It is a basement building with three aboveground floors and usable attic. On the ground floor of the apartment house there is a café.
|
|
|
Determination of closing valve control moments
Benda, David ; Vosynek, Petr (referee) ; Hnízdil, Milan (advisor)
This bachelor thesis deals with the calculation of the torque on the output shaft of the four-concentric butterfly valves and experimental measurement of this torque on real manufactured valves. At the beginning is carried out a brief research, the purpose describe the basic components of the butterfly valves, its production variants of the offset disc, eventually types of fittings to piping. The main part describes the partial torque occurring on the individual components. Following data from the performer measurement and at the end are compared obtained results.
|
|
|
Heating and cooling systems in a multifunctional building
Fuksa, Lukáš ; Horák, Petr (referee) ; Formánek, Marian (advisor)
The master´s thesis is about the design of heating and cooling of a multifunctional house. The building is functionally divided into parts of shops, administration and apartments. Thesis describes various cooling options and basic types and functions of air conditioning systems. Three variants of the system at the level for expanded building permits and their evaluation are developed. The selected variant is developed at the project level for the construction.
|
|
|
Evaluation of Smap3D software as a tool for design of evaporation system
Odstrčil, Marek ; Naď, Martin (referee) ; Vondra, Marek (advisor)
The main goal of the master thesis is an evaluation of a software package Smap 3D Plant Design in design of evaporation technology, specifically 3D of the pipeline network and its subsequent documentation. The thesis describes evaporation technology in general, then the evaporator testing site in Laboratory of Energy Intensive Processes in NETME Centre is presented, where pipeline network needs to be designed. In the next part a reference 3D model was created as well as a documentation using SolidWorks routing. Subsequently, an equivalent 3D model was created using Smap 3D Plant Design – Piping and a documentation was created using Smap 3D Plant Design – Isometric. Finally, these two methods of creating pipeline were compared to each other, and recommended method was chosen.
|
|
|
Cooling systems for polyfunctional object.
Milatová, Adriána ; Blasinski, Petr (referee) ; Formánek, Marian (advisor)
The diploma thesis deals with the design of cooling devices of a fourteen-storey polyfunctional building with administration part and housing units. The thesis describes the physical nature of cooling, the basic types and functions of cooling systems and legislation related to cooling devices. Two types of cooling systems are selected and developed for the assigned object at the building permit design level. The work includes calculations of all elements of individual systems. The purpose of this diploma thesis is the comparison of these variants and the evaluation of suitability for use on the individual parts of the assigned building. The variant chosen is elaborated at the level of the rea-lization project, including the drawing documentation.
|
guest ::
